1
1. Introduction
This is a 4 to 2 HDMI v1.3 switch it allows 4 HDMI port to be switched to two
independent display output. This is compatible to HDMI v1.3 specifications,
a cutting edge technology which defines the support to transfer Deep
Color (12 bits/color) video and new lossless compressed (Dolby TrueHD,
Dolby Digital Plus and DTS-HD Master Audio) digital audio, with a high
bandwidth up to 225MHz. The HDMI v1.3 Distribution Amplifier also does
signal amplification and equalization.
2. Main Features
●
Compliant with HDMI 1.3, HDCP 1.1 and DVI1.1 standards.
●
Supports four HDMI inputs and switch to two independent display output
(can’t support simultaneously output).
●
Supports digital video formats in Deep Color Mode at up to 36 bits
(12bits/color) and new lossless compressed (Dolby TrueHD, Dolby Digital
Plus and DTS-HD Master Audio) digital audio.
●
Supports equalize and recover incoming TMDS data before re-transmitting
them with optimal quality regardless of the incoming signal quality.
●
Supports high definition input up to 1080p@(24/60)Hz, output resolution
follows input.
●
Support CEC function.
●
HDMI cable distance test with 1080p/8bits resolotion, the input/output
source can run up to 15/15 meters and 1080p/12bits the input/output
source can run up to 7/7 meters.
3. Package Contents
●
4 x 2 HDMI v1.3 switch.
●
5V/1A DC power supply adaptor.
●
Operation Manual.
4. Operation Controls and Functions
4.1. Front Panel
1 . Remote Control Sensor.
2 . HDMI input selection/Indicator: Press the "Input" button sequentially to
switch to your desired input (HDMI 1 to HDMI 4), the LED will illuminate to
indicate which input source is selected.
4321
1 12 23 4
OUTPUT
INPUT
POWER
CLUX-4S2