CLUX-41W
4 by 1 HDMI Switcher
Operation Manual
CLUX-41W
Revision History
Version No. Date Summary of Change
V1 20090514 Preliminary Release
VR2 20130208 Sys. Resent Rephrase
Precaution
Failure to follow the precautions described below may cause damage to
4 by 1 HDMI Switcher and void the warranty.
DO NOT open the case. Doing so will void the warranty. If you find
problem with it, please return back to your retailer or seller who will
assist you or provide you with solution.
DO NOT use third-Party AC adapter or power cord. Doing so may
damage 4 by 1 HDMI Switcher.
DO NOT bump, jar or drop contents of the products as it may
damage it and result in warranty void.
DO NOT set any liquids or beverages on the drive as they may
damage 4 by1 HDMI Switcher.
Table of Contents
1. Introduction…………………………………………………........……….
2. Application…………………………………………………................….
3. Package Contents……………..…………………….........................…
4. System Requirement…………………………………….…….......…….
5. Features…………………………………………….......……........………
6. Operation Controls and Functions…………………………………….
6.1 Top Panel .................................................................................
6.2 Front Panel………………………………………….........….….…
7. Remote Control.....................…………………………….........……..…
8. Connection and Installation…………………………….........……..…
9. Specications……………………………………………...........………..
1
1
1
1
2
3
3
3
4
4
5
1. Introduction
This is a high performance HDMI Switcher with remote control. It allows various
HDMI sources to share a HDTV display. Simply press the button to select your
desire HDMI source for display on the HDTV. The device is compatible to
HDMI specifications, and can define to support Deep Color transfer (10-bit
and 12-bit) video and new lossless compressed (Dolby TrueHD, Dolby Digital
Plus and DTS-HD Master Audio) digital audio, with a high bandwidth up to
225MHz.
2. Application
Showroom display control
Educational demo
Installation usage
Advertising display
3. Package Contents
4 by 1 HDMI Switcher
Remote Controller
Power adaptor
Operational Manual
4. System Requirement
Input source equipments with HDMI cable and output displayer with HDMI
cable.
1
5. Features
HDMI, HDCP1.1 and DVI1.0 compliant.
Deep color video up to 12bit, 1080p@60Hz.
Four HDMI sources to connect up to a HDMI display simultaneously.
Supports DVI source and DVI display by using HDMI to/from DVI adaptor
cable.
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio transmission (32-192kHz Fs sample rate).
Supports a wide range of PC and HDTV resolutions from VGA to UXGA and
480i to 1080p.
Full HDCP Compliant.
HDMI cable distance test with 1080p/8-bit resolution, the input/output
can run up to 15/15 meters. If 1080p/12-bit, the input/output source can
run up to 10/15 meters.
Support xvYCC.
Support CEC bypass.
Support Sys. Reset function with hot key switch to reset the system within
8~10 minutes into factory mode.
2
6.2 Front Panel
6. Operation Controls and Functions
6.1 Top Panel
①
②
DC 5V
①
HDMI OUT
LUX-41W
LUX-41W
4X1 HDMI V1.3 Switcher
1
ON
OFF
ON
OFF
Power
Sys.Reset
INPUT
1
2
3
4
3
③
④
⑤
⑥
⑦
2
INPUT
4
DC 5V: Plug the 5VDC power
①
supply into the unit and connect
the adaptor to AC wall outlet.
HDMI OUTPUT: Connect your LCD
①
TV or HD monitor with HDMI cables.
Power LED: Red LED will illuminate
②
when the Power is On.
Power switch: Switch to ON to
③
turn on the device or switch to
OFF to set the device standby. The
factory default is OFF.
Sys. Reset: System reset function.
④
It is suggested having this function
switch OFF always
except when
doing system reset. By switching
to ON, the system will reset HDMI
output to TVs HDMI input1gradually
within 8~10 minutes and therefore
TVs HDMI input 1 should be
connected. Switching to OFF means
CEC bypass. Factory default is OFF.
The system reset function will
Note:
only functioning when the display is
built with CEC function.
INPUT: Input button for selecting
⑤
input channel.
1~4: Input LED, the blue LED will
illuminate with selected input
channel.
IR: IR Receiver.
⑥
HDMI INPUT: Connect the
⑦
equipments to the HDMI input ports
such as DVD player, Blue Ray, PS3
and or other sources with HDMI
cable. The factory default is on
input 1.
3
7. Remote Control
Power button: Press to switch On the device,
①
press it again to set the device in standby
mode.
1~4: Press the desire input button to select the
②
input source.
8. Connection and Installation
1
2
LCD TV
PS3
3 M
30˚
30˚
3 M
4
DVD
Blue Ray
7 M
9. Specications
Frequency bandwidth 2.25Gbps (single link)
Input port 4 x HDMI Female ports
Output port 1 x HDMI Female port (single link)
HDMI output resolution 480i~1080p 50/60, 1080p24, VGA~UXGA
Power Supply 5VDC / 1A (US/EU standards, CE/FCC/UL certified)
Dimensions (mm) 93(W) x 148 (D) x 31 (H)
Weight (g) 210
Chassis Material Aluminum
Silkscreen Color Silver
Operating Temperature From 0 ºC ~ 40 ºC
Power Consumption 2W
CYPRESS TECHNOLOGY CO., LTD.
Home page: http://www.cypress.com.tw
20090519 MPM-CLUX41W
Loading...