Cypress CLUX-3D12S1A Operation Manual

Download

CLUX-3D12S1A

1 x 2 HDMI Splitter with 3D

Audio to Amplier

Operation Manual

CLUX-3D12S1A

Draft Manual

Disclaimers

The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document. Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual, or otherwise - without express written permission and consent from Cypress Technology.

Trademark Acknowledgments

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment:



Always follow basic safety precautions to reduce the risk of

re, electrical shock and injury to persons.



To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.



Never spill liquid of any kind on or into this product.



Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.



Do not attach the power supply cabling to building surfaces.



Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.



To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide ventilation.

Revision History

Version No Date Summary of Change

RDV1

20110516

Preliminary Release

RDV2

20110909

LED Color

Table of Contents

1. Introduction ..................................................................................1

2. Applications .................................................................................1

3. Package Contents ......................................................................1

4. System Requirements ..................................................................1

5. Features ........................................................................................1

6. Specifications ..............................................................................2

7. Operation Controls and Functions .............................................3

7.1 Front Panel ....................................................................3

7.2 Rear Panel ....................................................................4

8. Connection and Installation .....................................................5

1. Introduction

The 1 x 2 HDMI with audio box is compliance with HDMI 1.3 and it allows Settop boxes, DVD players, Blu-ray players and other HDTV devices with two HDMI outputs to be connected to up to two HDTV displays. The 3

HDMI output supports 3D audio with blue screen, which allaws it to connect to the AVR that does not support 3D signal.

2. Applications

• Showroom environment

• Education demo

• Installation usage

• Home entertainment

3. Package Contents

• 1x 2 HDMI with audio Box

• 5V DC power supply adaptor

• Operation Manual

4. System Requirements

Input source equipments with HDMI and HDMI output connector(s) to the HDTV and AVR.

5. Features

• HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver.

• Deep color video up to 12bit, 1080p@(24/60)Hz.

• One HDMI source to connect up to two HDMI displays simultaneously.

• One audio HDMI output connected to AVR.

• HDCP keysets allows each output to work independently when connecting

to a HDMI display.

• Splits a HDMI source up to two outputs without signal loss.

• Supports DVI source and DVI display by using HDMI to/from DVI adaptor

cable.

• Supports LPCM 7.1CH, Dolby Digital and Dolby Digital Plus Audio transmission

(32-192kHz Fs sample rate).

• Supports a wide range of PC and HDTV resolutions from VGA to WUXGA

and 480i to 1080p.

• HDMI cable distance test with 1080p/8bits resolution, the Input/Output source can run up to 20/15 meters. If 1080p/12bits the Input/Output source can run up to 15/10 meters.

• Supports EDID functionality. The unit will detect the rst HDMI v1.2/8bits,

HDMI v1.3 (10bits or 12bits) or DVI output source’s EDID and record in the unit. When the output sources connected with the entire combination version (HDMI v1.2/8bits, v1.3/10bits, v1.3/12bits or DVI), the system can automatically to support HDMI v1.2/8bits, v1.3/10bits, v1.3/12bits or DVI to expect ports. [Note]: The detection priority is HDMI v1.3 > HDMI v1.2 > DVI.

• Support CEC bypass.

6. Specications

Input Port 1 x HDMI Output Port 2 x HDMI, 1 x HDMI (For audio only with Blue Screen) Input Resolution 480i ~1080p 50/60, VGA~WUXGA Output Resolution 480i ~1080p 50/60, VGA~WUXGA

Audio output Up to 192KHz

Sampling Frequency ESD Protection Human Body model: ± 8kV (air-gap discharge) ± 4kV (contact discharge) Dimensions (mm) 100(W) x 147(D) x 25(H) Weight(g) 300 Chassis Material Aluminum Silkscreen Color Black

Operating Temperature 0˚C~40˚C / 32˚F ~ 104˚F Storage temperature -20˚C~60˚C / -4˚F ~ 140˚F

Relative Humidity 20~90% RH (no condensation) Power Consumption (W) N/W (Max)

7. Hardware Description

7.1 Front Panel

1 2

①

HDMI OUT 1 & 2: Connect each of the output ports to the HDMI display. HDMI OUT 1 is the master video port and when more than one output connected, the HDMI outputs play identical video signal simultaneously.

②

HDMI OUT 3: Connect HDMI audio output port to the AVR, the audio output is simultaneously with HDMI 1and 2. Meanwhile, the display will show BLUE screen.

7.2 Rear Panel

1 2 3

①

HDMI IN: Connect input port to the HDMI or DVI output of your source equipment such as DVD player or set-top-box.

②

Power/3D indicator: When system is ON the RED LED will illuminate, when the system detected 3D format the GREEN LED will illuminate.

③

DC power jack: Plug the DC 5V power supply into the splitter and

connect the adaptor to AC wall outlet.