CLUX-31N
HDMI 3 to 1 Switcher
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VS1 15/04/13 First Release
VR2 13/05/13 Auto Detection Behavior
CONTENTS
1. Introduction ............................................ 1
2. Applications ........................................... 1
3. Package Contents ................................ 1
4. System Requirements ............................ 1
5. Features .................................................. 2
6. Operation Controls and Functions ....... 3
6.1 Front Panel .........................................3
6.2 Rear Panel .........................................4
6.3 Remote Control .................................4
7. Connection Diagram ............................ 5
8. Specications ........................................ 6
1. INTRODUCTION
The HDMI 3 to 1 Switcher allows 3 HDMI sources to be connected to
the same HDMI TV/Monitor input. It has IR, automatic and manual
input selection and a 'last memory' function that remembers the
last input selection used. The EDID bypass function ensures the best
resolution. The switcher is also DVI compatible with the use of DVI to
HDMI adaptor.
2. APPLICATIONS
• Share a single TV/Monitor input between three source devices
• Add HDMI inputs to an AV Receiver
• Lecture room presentation
• Public display
• Showroom presentation
3. PACKAGE CONTENTS
• HDMI 3 to 1 Switcher
• 5 V/1 A Power Adaptor
• Remote Control (CR-22)
• Operation Manual
4. SYSTEM REQUIREMENTS
Source equipment such as a Games Consoles, Blu-ray Player (or a PC/
Laptop with DVI cables or DVI to HDMI cables) and a monitor or TV
with HDMI cables.
1
5. FEATURES
• HDMI, HDCP 1.1 and DVI 1.0 compliant
• Supports 24/30/36-bit color depth display
• Supports High Denition audio – Dolby Digital TrueHD and DTS-HD
Master Audio
• Auto Signal Enhancement that improves signal quality for long
distance transmission
• Auto input detection with LED indicators
(When a new incoming source signal is connected, input selection
will automatically switch to that input port)
• Ideal for home theater integration
• EDID bypass
• Supports HDMI 3D signals
• Supports high resolution input:
- PC: VGA, SVGA, XGA, SXGA, UXGA (1600×1200) and 1920×1200
- HDTV: 480i, 480p, 576i, 576p, 720p@50/60, 1080i@50/60 and
1080p@24/50/60
• Easy to install and simple to operate
• Control via front panel buttons and IR Remote control
• Last memory on power and input selection
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER INPUT IN1 IN2 IN3
CLUX-31N
1 2 3
1
IR Window
IR Receiver window (accepts the remote control signal of this
device only).
2
POWER Button and LED
Press this button to turn on the device, the LED will illuminate. Press
it again to switch the device into standby mode and the LED will
turn off.
3
INPUT Buttons and LEDs
Press these buttons to switch the source inputs from IN1 to IN3. The
LED will illuminate to indicate which input is active.
3
6.2 Rear Panel
OUTPUT IN3 IN2 IN1
DC 5V
1 2 3
1
OUTPUT
Connect to an HDMI equipped TV/monitor or AV Receiver for
display of the selected HDMI source signal.
2
IN 1/2/3
Connect to the HDMI source equipment such as a Blu-ray player or
a Set-top Box with HDMI cables or DVI to HDMI cables.
3
DC 5V
Connect the 5V DC power supply to the unit and plug the adaptor
into an AC outlet.
6.3 Remote Control
1
POWER
Press this button to turn on the device; press it
again to switch the device into standby mode.
2
1~3 Buttons
Direct input selection.
3
4~0 Buttons
These buttons have no function with this device.
1
2
3
CR-22
4
7. CONNECTION DIAGRAM
Games Console
HDMI
Input
Set-top Box
HDMI
Input
OUTPUTIN3 IN2IN1
HDMI
Output
Blu-ray Player
HDMI
Input
Power
Supply
DC 5V
TV/Monitor
5
8. SPECIFICATIONS
Video Bandwidth 225 MHz/6.75 Gbps
Input Ports 3×HDMI Female Ports (Type A Connector)
Output Port 1×HDMI Female Port (Type A Connector)
Power Supply 5 V/1 A DC (US/EU standards, CE/FCC/UL
certied)
ESD Protection Human body model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Dimension 200 mm (W)×106 mm (D)×30 mm (H)
Weight 266 g
Chassis material Aluminum
Silkscreen Color Black
Operating Temperature 0 ˚C~40 ˚C/32 ˚F~104 ˚F
Storage Temperature −20 ˚C~60 ˚C/−4 ˚F ~ 140 ˚F
Relative Humidity 20~60 % RH (no condensation)
Power Consumption 3.2 W
6
CYPRESS TECHNOLOGY CO., LTD
Home page: http://www.cypress.com.tw
MPM-CLUX31N
Loading...