Cypress CLUX-22HC Operation Manual

CLUX-22HC

HDMI/CAT6 to HDMI/

CAT6 Splitter Switcher

Operation Manual

CLUX-22HC

Disclaimers

The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

Copyright Notice

No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.

© Copyright 2009 by Cypress Technology.
All Rights Reserved.
Version 1.0 December 2009

Trademark Acknowledgments

All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:



Always follow basic safety precautions to reduce the risk of

fire, electrical shock and injury to persons.



To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.



Never spill liquid of any kind on or into this product.



Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.



Do not attach the power supply cabling to building surfaces.



Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.



To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.

Revision History

Version No Date Summary of Change

V1 20091208 Preliminary Release

Table of Contents

1

1

1

1

2

3

4

4

5

6

7

9

1. Introduction…………………………………………………........……….

2. Applications……………………..…………………………................….

3. Package Contents…………………………......…………….............…

4. System Requirements……...…………………..….…………........…….

5. Features…………………………………………….......……........………

6. Specications..………………………………………...........………...….

7. Operation Controls and Functions………………...……........………

7.1 Front Panel ...............................................................................

7.2 Rear Panel……………......………………………….........…….…

8. RJ-45 Pin Denitions …….………………….......................…..…..…...

9. Connection and Installation.............................................................

10. Acronyms ...........................................................................................

1. Introduction

The HDMI/CAT6 to HDMI/CAT6 Splitter Switcher is the most advanced
solution for HDMI and Video/DDC signal distribution. This CAT6 output port
can be easily connected to an HDMI receivers CAT6 input port to allow a
stable connection between an HDMI source and any compatible display.
Each product in this series is compatible to HDMI V1.3, which defines and
supports the transfer of Deep Color (10bit and 12bit) video and a new
lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio) digital audio signal, with a high bandwidth up to 225MHz (6.75Gbps).
Besides splitting and distributing, the Video/DDC CAT6 output also does signal
amplification and equalization which provide high performance I/O of audio
and video.

2. Applications



Home entertainment integration



Multi-task project presentation



Showroom Display



Advertising display control



System installation control

3. Package Contents



1 x HDMI/CAT6 to HDMI/CAT6 Splitter Switcher



5V DC power supply adaptor



User Manual

4. System Requirements



Input source equipment(s) with HDMI cable and or HDMI to CAT6 transmitter



Output display(s) with HDMI cable and or CAT6 to HDMI receiver with

HDMI cable to display

1

5. Features



HDMI 1.3, HDCP1.1 and DVI1.0 compliant.



Deep color video up to 12bit, 1080p@(24/60)Hz.



Simultaneously outputs one HDMI and one Video/DDC CAT6 source to

one HDMI and one Video/DDC CAT6 output.



HDCP keysets allows each output to work independently when

connecting to an HDMI display.



Capable of splitting HDMI/CAT6 sources to HDMI/CAT6 outputs without

any signal loss.



Supports LPCM7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD

master audio transmission (32-192 kHz Fs sample rate).



Supports a wide range of PC and HDTV resolutions from VGA to SXGA

and 480i to 1080p.



Full HDCP Compliant.



According to tests The Input/Output source can be up to 15/15 meters

away when the HDMI cable has a resolution of with 1080p/8bits. The
CAT6 cable test showed that with a resolution of 1080p/8bits, the Input/
Output source can be 45/45 meters away. The HDMI cable test showed
that with a resolution of 1080p/12bits, the Input/Output source can be
15/10 meters away. And finally the CAT6 cable test showed that with a
resolution of 1080p/12bits, the Input/Output source can be 20/20 meters
away

2

Bandwidth Frequency 2.25Gbps (single link)
Input Ports 1 x HDMI female port (Type A connector)

1 x CAT6 input Video/1 x CAT6 input DDC

Output Ports 1 x CAT6 output Video/1 x CAT6 output DDC

1 x HDMI female ports (Type A connector)
EDID STD / TV
HDMI Audio Output PCM2, 5.1, 7.1, Dolby 5.1, DTS 5.1, DD+, D-TrueHD,

DTS-HD
HDMI Cable In 1080p 8-bit (15M), 12-bit (15M)
HDMI Cable Out 1080p 8-bit (15M), 12-bit (10M)
CAT6 Cable In 1080p 8-bit (45M), 12-bit (20M)
CAT6 Cable Out 1080p 8-bit (45M), 12-bit (20M)
HDMI Resolution 480i, ~ 1080p 50/60, 1080p 24, VGA ~ SXGA
IR Frequency 20 ~ 60KHz
ESD Protection Human body model: ± 8kV (air-gap discharge)

±

4kV (contact discharge)

Power Supply 5VDC/3.2A (US/EU standards, CE/FCC/UL certified)
Dimensions (mm) 215(W) x123(D) x 30(H)
Weight(g) 365
Chassis Material Metal
Silkscreen Color Silver
Power Consumption 4.1W
Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F
Relative Humidity 20~90% RH (non- condensing)

6. Specications

3

7. Operation Controls and Functions

The following sections describe the hardware components of the unit.

7.2 Front Panel

1 2 3 4 65

①

HDMI/CAT6 input selection: Switch to select input sources from either

HDMI or CAT6.

②

EDID Control Switcher: The default factory setting is TV, do not switch if the

display is compatible. Switch to STD to use built-in EDID.

[Note]:

1. When EDID is switched to TV, the unit will detect and record the first HDMI’s
output EDID in the unit. If the first detected HDMI output is DVI it will
continue to pass on to the next output until the first HDMI output is found.
The detection priority is HDMI v1.3 > HDMI v1.2 > DVI.

2. When EDID is switched to STD the unit will use its own EDID which supports:
Video →1080p 8-bit (max)
Audio →PCM 2CH

3. When EDID is switched to STD with input selection on HDMI or CAT6 IN the
display TV or monitor, they will automatically switch to HDMI input 1. When
EDID is switched to TV regardless of the input selection the display TV or
monitor will switch to HDMI input mode 1. Therefore it is not suggested to
switch the EDID to STD.

4. The EDID selection will activate only when the unit is plugged in and power
is on.

③

CEC output: Only when switched to HDMI, the HDMI’s output port CEC will

bypass the CEC and proceed directly to the HDMI and CAT6 input ports.
When switched to HDMI and CAT6, the HDMI and CAT6 output ports CEC
will bypass the CEC and go proceed directly to the HDMI.

④

HDMI Input: Connect input port to the HDMI or DVI output port of your

4

source equipment such as DVD player or set-top-box.

⑤

CAT6 IN: These slots are for connecting the Video/DDC input to the

Video/DDC output of the transmitter unit with CAT6 cables.

[Note]:

1. Cable tested with CAT-6E / 23AWG / was solid, so any cables with
different specifications might result in a different distance.

2. The cable distance was tested with a PS3 40G and 37" SamSung 12
bits LCD TV.

3. The figures provided in this manual are for reference use only, actual
results depend on your specific configuration, i.e.: your source and
display and type of cabling used.

⑥

DC 5V: This is the slot where you insert the 5V DC power supply for

electrical power before plugging the adaptor into an AC wall outlet.

7.1 Rear Panel

1 2

3

4

5

6

①

CAT6 OUT: Connect the Video/DDC output to the Video/DDC input of

the receiver unit using CAT6 cables.

②

HDMI OUT: Connect HDMI output port to the HDMI display.

③

HDCP indicators: When the input source has HDCP protection the HDCP

LED will turn on.

④

The LED light will turn when the HDMI or DVI source has been connected.

⑤

HDMI/CAT6 input indicator: The LED light will turn on when the HDMI or

CAT6 source has been selected.

⑥

Link OUT: The LED light will turn on when the display has been connected.

5

8. RJ-45 Pin Denitions

Pin Video DDC

1 TX2+ DDC Bus Clock

2 TX2- NC

3 TX1+ DDC Bus Data

4 TX0+ Power 5V

5 TX0- GND

6 TX1- IR IN

7 TXC+ HPD

8 TXC- CEC

6

30°30

°

3M 3M

7M

HD TV

HDMI

Cable

HDM

I

HDMI

HDMI

HDMI

HDMI

HDMI

IR Receiver

DVD HDMI IN

IN OUT

CAT6 OUTPUT

CAT6

OUTPUT

IR Blaster

IR Blaster

DVD

AorBorCAorBorC

x3

CLUX-22HC

CLUX-1H4CAT

CLUX-1H8CAT

CH-106TX

CH-1106TX

DDC

VIDEO

DDC

VIDEO

AorBorC

HDMI

HDMI

CAT6

OUTPUT

DVD

HD TV

DDC

VIDEO

CH-106TX

CH-1106TX

CLUX-1H4CAT

CLUX-1H8CAT

CMLUX-4H4CAT

CLUX-22HC

DDCVIDEO

HDMI

HDMI

HDMI

Cable

HDMI IN

CAT6 IN

9. Connection and Installation

7

A B C

HD TV

HDMI

Cable

IR Receiver

HDM

I

HDMI

30

°

30

°

3M 3M

7M

HD TV

HDMI

Cable

IR Receiver

CAT6

OUTPUT

CAT6

OUTPUT

HDM

I

HDMI

30

°

30

°

3M 3M

7M

DDC

VIDEO

AorBorC

HD TV

HDMI

Cable

HDM

I

HDMI

DDC

VIDEO

AorBorC

CH-106RX / CH-1106RX CLUX-1CAT4H / CLUX-1CAT8H CLUX-22HC

8

Acronyms

A

Acronym Complete Term

CAT6 Category 6 cable

DVI Digital Visual Interface

EDID Extended Display Identification Data

HDCP High-Bandwidth Digital Content Protection

HDMI High-Definition Multimedia Interface

HDTV High-Definition Television

IR Infrared

LPCM Linear Pulse Code Modulation

STD Standard

SYNC Synchronize

SXGA Super Extended Graphics Array

VGA Video Graphics Array

9

10

20091217 MPM-CLUX22HC

Home page: http://www.cypress.com.tw

CYPRESS TECHNOLOGY CO., LTD.