CLUX-18W
1 by 8 HDMI 1.3 Splitter
Operation Manual
CLUX-18W
Revision History
Version No Date Summary of Change
V1 20090209 Preliminary Release
V2 20090403 Cable Distance
1080p/8bit 10M in/15M out
1080p/12bit 6M in/10M out
VR3 20121219 Supports Resolution
Precautions
Failure to follow the precautions described below may cause damage to
1 by 8 HDMI 1.3 Splitter and void the warranty.
DO NOT open the case. Doing so will void the warranty. If you find
problem with it, please return back to your retailer or seller who will
assist you or provide you with solution.
DO NOT use third-Party AC adapter or power cord. Doing so may
damage 1 by 8 HDMI 1.3 Splitter.
DO NOT bump, jar or drop contents of the products as it may
damage it and result in warranty void.
DO NOT set any liquids or beverages on the drive as they may
damage 1 by 8 HDMI 1.3 Splitter.
Table of Contents
1. Introduction …………………………………………................................
2. Applications............................……………………………………………
3. Package contents.......………………………………………….....…….
4. System Requirements............……………………………….....………..
5. Features .............................………………………………………………..
6. Installation ............................……………………………………………..
Front Panel ............................……………………………………………..
Bottom Panel............................…………………………………………..
7. Connection and Installation..............................................................
8. Specications......................................................................................
1
1
1
1
2
3
3
4
4
5
1. Introduction
The HDMI v1.3 Splitter is the most advanced solution for HDMI signal
distribution. This device supports Deep Color (8 bit & 12 bit) video and a new
lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio) digital audio, with a high bandwidth up to 225MHz (6,75Gbps). Besides
splitting and distributing, this device also does signal amplification and
equalization to provide you with high performance I/O of audio and video.
With added features like EDID, CEC and system reset this device is made to
support your signal distributing needs.
2. Applications
Simultaneous multi channel display
Show room display control
Educational demonstration
Installation usage
3. Package contents
1 by 8 HDMI 1.3 Splitter
Power adaptor
Operational Manual
4. System Requirements
Input source equipments with HDMI cable and output displayers with HDMI
cables.
1
5. Features
HDMI v1.3, HDCP1.1 and DVI1.0 compliant Receiver.
Deep Color video up to 12bits, 1080p(24/60Hz).
One HDMI source simultaneously connected to eight displays
HDCP keysets allows each output to work independently when
connected to an HDMI display.
Can split an HDMI source eight times without any signal loss.
Supports both DVI source/display by using HDMI to/from DVI adaptor
cable.
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio transmission (32-192kHz Fs sample rate).
Supports a wide range of PC and HDTV resolutions from VGA to WUXGA
and 480i to1080p.
HDMI cable distance test with 1080p/8bit resolution, showed the i/o
distance can run up to 10/15m. If 1080p/12bit, the i/o distance can run up
to 6/10m.
Supports EDID. The unit will detect the first HDMI/DVI output display’s EDID
and record it in the unit. If the first detected output is empty or DVI, it will
pass on to the next output until the first HDMI/DVI display has been
detected. When users reconnect all the output displays or re-plug the
power cables, the system will automatically recover the EDID.
Supports xvYCC and CEC bypass.
Switch Reset button on to restore the system every 8-10mins
EDID settings for fast recognition between the source and display.
2
6. Installation
Front Panel
⑤
①
②
③
④
. HDMI OUTPUT 1~8:
①
Connect your LCD TV or HD monitor with
HDMI cables.
. EDID selection:
②
STD/TV
can select the deep color and audio
channel functions, if switching to TV the
unit will read the TV’s EDID and will then
send the image from the HDMI source.
Note:
switching to 8 bit when displaying media
from the system.
2CH/Multi CH
channels or Multi audio channels. This
option is only available when EDID is in
STD mode.
Note:
be sure the connected TV/display
supports it, otherwise the TV/display
will have no audio output unless HDMI
output connects to an AVR and then to
the TV/display.
8/12 bit
function. This selection is only available
when EDID is in STD mode.
Note:
and 12 bit displays, in order to ensure
all output will display properly, please
switch the first HDMI output to 8bits. On
the other hand when all outputs are of
the same strength, then switch to either
12 bit or 8 bit accordingly. The splitter will
not function properly if the displays are
of different bit strength, it cannot output
two different bit strengths at the same
time.
. Sys. Reset: System reset function.
③
It is always suggested to have this
function switched off except when
doing a system reset. By switching this
function on the system will reset HDMI
output to HDMI 1 in 8~10 minutes,
switching this off means CEC bypass.
Note:
works when the displayer has a built in
CEC function.
. Power & LED: Power switch On/Off Red
④
LED illuminate when power is on.
. HDMI INPUT: Connect your source
⑤
equipment with HDMI cables.
– By switching to STD the user
When in STD mode it is suggested
– Supports either 2
Before selecting Multi CH please
– Support 8 or 12 bit’s deep color
When HDMI output has both 8 bit
The system reset function only
3
Bottom Panel
①
into the unit and connect the adaptor
to AC outlet. Red LED will switch on
when the Power is on.
①
7. Connection and Installation
. DC 5V: Plug the 5VDC power supply
LCD TVLCD TV
LCD TVLCD TV
LCD TVLCD TV
DVD / Blue Ray
4
LCD TVLCD TV
8. Specications
Video bandwidth 2.25MHz/6.75Gbps (single link)
Input port 1 x HDMI Female port
Output ports 8 x HDMI Female ports (single link)
HDMI output resolution 480i~1080p, 1080p24, VGA~WUXGA
Power Supply 5VDC/3.2A (US/EU standards, CE/FCC/UL certified)
Dimensions (mm) 93 (W) x 220 (D) x 31 (H)
Weight (g) 300
Chassis Material Aluminum
Silkscreen Color Silver
Operating Temperature 0˚C~40˚C
Power Consumption 10W (max)
5
CYPRESS TECHNOLOGY CO., LTD.
Home page: http://www.cypress.com.tw
20090211 MPM-CLUX18W
Loading...