Cypress CLUX-16E Operation Manual

CLUX-16E

HDMI V1.3 1 by 16 Splitter

Operation Manual

CLUX-16E

Disclaimers

The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

Copyright Notice

No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.

© Copyright 2011 by Cypress Technology. All Rights Reserved.
Version 1.0 March 2011

Trademark Acknowledgments

All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:



Always follow basic safety precautions to reduce the risk of

re, electrical shock and injury to persons.



To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.



Never spill liquid of any kind on or into this product.



Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.



Do not attach the power supply cabling to building surfaces.



Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.



To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide ventilation.

Revision History

Version No Date Summary of Change
VR0 20110406 Preliminary Release

Table of Contents

1. Introduction ..................................................................................1

2. Applications ................................................................................. 1

3. Package Contents ......................................................................1

4. System Requirements ..................................................................1

5. Features ........................................................................................ 1

6. Specifications ..............................................................................2

7. Operation Controls and Functions .............................................3

7.1 Front Panel .................................................................... 3

7.2 Rear Panel .................................................................... 4

8. Connection and Installation .....................................................5

1

1. Introduction

The HDMI 1 by 16 splitter is capable of handling HDMI v1.3 and with support
for Deep Color video and new lossless compressed digital audio. With extra
features like EDID, this splitter is able to handle all your HDMI splitting needs.

2. Applications

• Simultaneous display up to 16 displays

• Advertisement display

• Demonstration display

• TV wall display

3. Package Contents

• HDMI 1 by 16 Splitter

• 5V / 6A Power Adaptor

• Operation Manual

4. System Requirements

Input source equipment such as PC or DVD player with connection cables and
output HD monitor or LCD TV with HDMI cable.

5. Features

• Compliant with HDMI 1.3, HDCP 1.1 and DVI 1.0

• Deep Color Video up to 12bits, 1080p@(24/60)Hz

• One HDMI source connect up to sixteen HDMI display simultaneously

• HDCP keysets allows each output to work independently when connecting

to a HDMI display

• Splits a HDMI source up to sixteen outputs without signal loss

• Supports DVI source and DVI display by using HDMI to/from DVI adaptor

cable

• Supports LPCM 7.1Ch, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio transmission (32-192kHz Fs sample rate)

• Supports a wide range of PC and HDTV resolutions from VGA to UXGA and

480i to 1080p

• HDMI cable distance tested with 1080p 8/12bits resolution the I/O source
can run up to 10/10 meters.

2

Note: A.Cable tested with 24AWG using cables of another type may
result in a different operating distance.
B. Cable distance test included the following: PS3 120G and 37”
Samsung 12-bit LCD TV.

C.Figures provided in this manual are reference gures only,
actual gures may depend on source and display use with cable
specication.

• Supports EDID functionality. The unit will detect the rst HDMI/DVI output
source’s EDID and record in the unit. If the rst detected output source
is empty it will pass to next source, until the rst HDMI/DVI been detected.

When re-plug the power, the system will automatically recover the
EDID.

• Support xvYCC

• Cascade up to 2 layer

3

6. Specications

TMDS Clock Frequency 225MHz

Input Port 1 x HDMI,
Output Ports 16 x HDMI
EDID STD/TV
HDMI Audio Format PCM2/5.1/7.1, Dolby 5.1, DTS 5.1, DD+, D-TrueHD, DTS-HD
HDMI Cable In 1080p 8-bit or 12-bit (10M)
HDMI Cable Out 1080p 8-bit or 12-bit (10M)

Power Supply 5V / 6A DC ( US/EU standards, CE/FCC/UL certied)

ESD Protection Human body model: ± 8kV (air-gap discharge)
± 6kV (contact discharge)
Dimensions(mm) 436 (W) x 120 (D) x 49(H)
Weight(g) 2000
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 0°C~40°C / 32°F~104°F
Storage Temperature -20°C~60°C / -4°F~140°F
Power Consumption 20W
Relative Humidity 20 ~ 90% RH (non-condensing)

4

7. Operation Controls and Functions

7.1 Front Panel

1 2

q

. Power LED: The green LED will illuminate when the power is connected

with AC wall outlet.

w

. SYNC: The LED will illuminate in green when the device has detected

with sync from source. This LED will also blink once while the power is

turned on.

7.2 Rear Panel

3 4 51 2

q

. EDID Switch STD/TV: This switch allows user to select the function of EDID

from TV or from the built-in EDID of the device. By switching the dip

switch to TV will allow the source to send out the signal according to

1st HDMI output’s EDID and by switching it to STD will allow the source

to send out the signal according to the set EDID recorded in the device.

The default setting is on TV, leave it as it is when the display is properly

playing. .

②

. SERVICE: This slot is for manufactory service purpose only.

③

. HDMI IN: This slot is to connect with input source equipment such as

DVD/Blue-Ray player with HDMI cable for video and audio input signal.

④

. HDMI Out 1~16: Thess slots are to connect with LCD TV or HD monitor for

both video and audio display simultaneously with HDMI cables.

t

. DC 5V: This slot is where you plug the 5V DC power supply into the unit

and connect the adaptor to an AC wall outlet.

5

8. Connection and Installation

DVD Blu-Rayor

HDTV HDTV HDTV HDTV HDTV HDTV HDTV HDTV

HDTV HDTV HDTV HDTV

HDTV HDTV HDTV HDTV

6

Acronyms

A

Acronym Complete Term

DVI Digital Visual Interface

EDID Extended Display Identication Data

HDCP High-bandwidth Digital content protection

HDMI High-Denition Multimedia Interface

STD Standard

MPM-CAUSBAT100R

Home page: http://www.cypress.com.tw

CYPRESS TECHNOLOGY CO., LTD.