CLUX-11CD
HDMI Audio Extractor
Operation Manual
CLUX-11CD
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2010 by Cypress Technology.
All Rights Reserved.
Version 1.0 December 2010
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
VR0 20110325 Preliminary Release
VR1 20110425 Support 3D Signal
Table of Contents
1
1
1
1
2
3
4
4
5
5
5
6
7
8
1. Introduction ……………………..……………………...…........….…….
2. Applications …………………..………………….……...................…..
3. Package Contents ………………………...........……….................…
4. System Requirements ……………..……….........………............…….
5. Features …………………………………………......……........…...……
6. Specications ………………………………...……..........………....….
7. Operation Controls and Functions ……………...……..............……
7.1 Top Panel .................................................................................
7.2 Right Panel .………………………………….....….......…...….…
7.3 Left Panel .………………..………………….....….......…...….…
7.4 Upper Panel .…………………..…………….....….......…...….…
7.5 Rear Panel .………………………….……….....….......…...….…
8. Connection and Installation ….………………….........…..…..…......
9. Acronyms …......................................................................................
1. Introduction
The HDMI™ Audio Extractor is a device that allows you to extract audio
signals from your HDMI source. When connecting with a TV or display you
don’t always get great audio, or in the case of a display, no audio at all, so
with this Audio Extractor you can take your original HDMI audio signal and
convert it to optical and L/R audio. What this means is that you can output
your audio signal to external speakers or extend your audio signal, the
HDMI™ Audio Extractor is the perfect choice.
2. Applications
Game entertainment on monitor
Demonstration display
Showroom display
3. Package Contents
HDMI Audio Extractor
5V / 1.2A Power Adaptor
Operation Manual
4. System Requirements
Input source equipments and output display TV/monitor and or amplifier/
active speaker with connection cables.
1
5. Features
Compliant with HDMI 1.3, HDCP 1.2 and DVI 1.0
Supports HDMI Sample Rates up to 192 kHz
Supports Optical Sample Rate up to 48 kHz
Supports TMDS clock frequency rate 225MHz
Supports high-bit-rate (HBR) audio
HDMI cable distance testing showed that with 1080p 8bit resolution,
the input & output can run up to 15 meters
Low power consumption
Supports built-in audio EDID switch of LPCM2,5.1/7.1 or Bitstream
Supports 3D signal
2
6. Specications
Input Port 1 x HDMI
HDMI Sample Frequency Up to 192 kHz
Optical Sample Frequency Up to 48 kHz
Output Port 1 x HDMI, 1 x Optical, 1 x L/R
HDMI Audio Format PCM2/5.1/7.1, Dolby 5.1, DTS 5.1, DD+, D-TrueHD,
DTS-HD
Optical Audio Format PCM2, Dolby 5.1, DTS 5.1
L/R Audio Format LPCM2
Power Supply 5V/1A linear power adaptor (US/EU Standards,
CE/FCC/UL Certified)
Or 5V/1.2A switching power adaptor
(with universal plug, CE/F
CC/UL certified)
ESD Protection Human body model:± 8kV (air-gap discharge)
±
6kV (contact discharge)
Dimensions(mm) 90.7 (W) x 85.8 (D) x 34(H)
Weight(g) 90
Chassis Material Plastic
Silkscreen Color White
Power Consumption 100W
Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F
Power Consumption 2.1W
Relative Humidity 20 ~ 90% RH (non-condensing)
3
7. Operation Controls and Functions
7.1 Top Panel
HDMI Audio Extractor
Link
Power
①
②
①
Power LED: The blue LED will illuminate when the power is connected with
AC wall outlet, when the power button is pressed to set the device off the
LED will turn off.
②
LINK: The LED will illuminate in green when both the source and the display
are sync together. This LED will also blink once while the power is turned
on.
4
7.2 Right Panel
① ②
Bitstream
TV
2CH
LPCM
Power
①
TV/Bitstream/2Ch LPCM switch: This switch allows users to select the input
source's audio EDID. When switched to TV it means to select the HMDI
audio output that support up to LPCM 7.1, when switched to Bitsteam it
means to select the both HDMI and Optical output that support up to
Dolby 5.1 and when switched to 2CH LPCM that means all audio output
of HDMI, Optical and 2CH LPCM will output audio synchronously that
support up to LPCM 2CH. Depending on the source's signal, users can
select multiple audio output.
②
Power Button: Press this button switch ON or set the device to standby
mode.
7.3 Left Panel
①
DC 5V
①
DC 5V: This slot is where you plug the 5V DC power supply into the unit
and connect the adaptor to an AC wall outlet.
7.4 Upper Panel
①
HDMI In
①
HDMI In: This slot is to connect to source equipment such as DVD/Blue-Ray
player with HDMI cable.
5
7.5 Rear Panel
① ② ③ ③
Out
OpticalHDMI L R
①
HDMI Out: This slot is to connect with display TV/monitor and HDMI cable
for video and audio signal output.
②
Optical Output: This slot is to connect with audio equipment such as
amplifier system or Hi-Fi speaker with optical cable for audio signal output.
③
L/R Output: These slots are to connect with audio equipment such as
amplifier syster or active speaker with L/R RCA jack for audio signal
output.
6
8. Connection and Installation
DVD
Blu-ray
Speaker
Stereo
CLUX-11CD
Amplifier
HDTV
HDMI
Cable
HDMI
HDMI
HDMI
Cable
HDMI
HDMI
L/R RCA Cable
Optical Cable
7
Acronyms
A
Acronym Complete Term
HDCP High-bandwidth Digital Content Protection
HDMI High-Definition Multimedia Interface
8
20101202 MPM-CLUX11CD
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.
Loading...