Cypress CLUX-11CA User Manual

CLUX-11CA
HDMI Audio Inserter
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.
Cypress Technology reserves the right to make improvements to this document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this equipment:
Always follow basic safety precautions to reduce the risk of re, electrical shock and injury to persons.
To prevent re or shock hazard, do not expose the unit to rain, moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
Do not attach the power supply cabling to building surfaces.
Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.
To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VS1 28/12/12 First Release
CONTENTS
1. Introduction ............................................ 1
2. Applications ........................................... 1
3. Package Contents ................................ 1
4. System Requirements ............................ 1
5. Features .................................................. 1
6. Operation Controls and Functions ....... 2
6.1 Top Panel ..........................................2
6.2 Right Panel ........................................2
6.3 Left Panel ..........................................3
6.4 Front Panel ........................................3
6.5 Rear Panel .........................................3
7. Connection Diagram ............................ 4
8. Specications ........................................ 5
9. Acronyms ............................................... 6
1. INTRODUCTION
The HDMI Audio Inserter lets you insert an external audio signal into
your HDMI or DVI signal path. The unit allows you to insert stereo and multi-channel surround sound signals to give users the capability to
select audio formats while extending your HDMI signal.
2. APPLICATIONS
Embeds external audio into HDMI signal
• Integrates audio and DVI video to HDMI signal output
• Replaces audio in the original HDMI signal by other input sources
3. PACKAGE CONTENTS
• HDMI Audio Inserter
• 5 V/1 A Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Source equipment such as PC/Laptop or DVD player with connection cables and HD monitor or LCD TV with HDMI cables.
5. FEATURES
• Compliant with HDMI, HDCP 1.2 and DVI 1.0
Supports HDMI audio sampling rates up to 192 kHz
Supports Optical S/PDIF audio sampling rate up to 48 kHz
Supports TMDS clock frequency up to 225 MHz
• Supports high-bit-rate (HBR) audio
• HDMI cable distance tested with 1080p at 8-bit or 12-bit resolution,
the input and output can run up to 15 meters (8-bit) or 10 meters (12-bit)
• Low power consumption
• Supports 3D signal
1
6. OPERATION CONTROLS AND FUNCTIONS
1
2
1
2
6.1 Top Panel
Power
Link
HDMI Audio Inserter
1
2
Power LED: The LED will illuminate in blue when the unit is
connected to the power supply and switched on.
Link LED: The LED will illuminate in green when both the source and
the display are connected and have established a link. This LED will also blink once while the power is turned on.
6.2 Right Panel
Audio In Select
Optical
HDMI L/R
Power
1 2
Audio In Select: Allows users to select among 3 different audio
input options. Switch among the original HDMI audio, Digital Audio (Optical) and Analog Stereo (L/R).
Power: Switches the unit ON or puts the device into STANDBY
mode.
2
6.3 Left Panel
1
1
2
3
1
DC 5V
1
DC 5V: Connect the 5V DC power supply into the unit and plug
the adaptor to an AC wall outlet.
6.4 Front Panel
Input
Optical HDMILR
321
R/L Input: Connect to the audio source equipment such as a PC/
Laptop or an Hi-Fi equipment with RCA cables.
Optical Input : Connect to the audio source equipment such as a
CD player or an Hi-Fi equipment with an optical cable.
HDMI Input: Connect to the audio/video source such as a DVD/
Blu-ray player with an HDMI cable.
6.5 Rear Panel
HDMI Out
1
HDMI Out: Connect to an HDMI display (LCD TV or HD monitor) or
AV Receiver to output both video and audio with an HDMI cable.
3
7. CONNECTION DIAGRAM
DVD Player
PC/Laptop
Analog Stereo Input
HDTV or Monitor
Digital Audio Input (Optical)
HDMI Input
Input
OpticalHDMILR
HDMI Audio
HDMI Out
Inserter
HDMI Output
HDMI Output
Blu-ray Player
AV Receiver
4
8. SPECIFICATIONS
Input Ports 1×HDMI, 1×Optical (Digital Audio),
1×L/R (Analog Audio)
HDMI Audio Sampling Rate Up to 192 kHz
Optical Audio Sampling Rate Up to 48 kHz
Output Port 1×HDMI
HDMI Cable I/O Distance 10 meter, 1080p@12-bit
15 meter, 1080p@8-bit
HDMI Audio Format LPCM 2/5.1/7.1, Dolby 5.1, DTS 5.1,
Dolby Digital+, Dolby TrueHD & DTS-
HD Master Audio
Optical Audio Format LPCM 2, Dolby Digital & DTS Digital
Audio 5.1
Power Supply 5 V/1 A linear power adaptor (US/EU
Standards, CE/FCC/UL Certied) or
5 V/1.2 A switching power adaptor
(with universal plug, CE/FCC/UL
certied)
ESD Protection Human body model:
±8kV (air-gap discharge)
±6kV (contact discharge)
Dimensions 90.7 mm (W)×85.8 mm (D)×34 mm
(H)
Weight 107 g
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0 ºC~40 ºC/32 ºF~104 ºF
Storage Temperature −20 ºC~60 ºC/−4 ºF~140 ºF
Relative Humidity 20~90 % RH (non-condensing)
Power Consumption 2.7 W
5
9. ACRONYMS
ACRONYM COMPLETE TERM
DVI Digital Visual Interface
HDCP
HDMI High Denition Multimedia Interface
High-bandwidth Digital content protection
6
CYPRESS TECHNOLOGY CO., LTD
Home page: http://www.cypress.com.tw
20121228 MPM-CLUX11CA
Loading...