4. System Requirements…………………………..….………….......…….
5. Features…………………………………………….......……........………
6. Operation Controls and Functions………………...…….........………
6.1 Front Panel ...............................................................................
6.2 Rear Panel …………………………………………..........…….…
7. Connection and Installation…………………………….........……..…
8. Specications……………………………………..……...........…………
1
1
1
1
1
2
2
2
3
4
1. Introduction
The IR Extender and the Repeater Boxes are two devices that are perfect
for controlling source equipment over long distances. Through the built-in IR
receiver and CAT5 cable, you are able to control up to five sources at the
same time while being 250 meters away, with their original remote controls.
There is no space limitation with the devices, meaning even if the source
equipment is placed in a different room on a different floor from the display,
the performance will stay the same. The IR Extender and Repeater boxes grant
users a great convenience, allowing you to control and display your desired
media instantly, anywhere, anytime.
2. Applications
TV walls at consumer electronic stores.
Home theater installation.
Lecture room display.
Home entertainment systems.
3. Package Contents
Infrared Extender Box (CIR-03)
Infrared Repeater Box (CIR-12)
1pc IR Eye Receiver cable (CIR-12)
5pcs IR Eye blaster cables (3pcs for CIR-03, 2pcs for CIR-12)
1pc 5V DC power supply adaptor
Operation Manual
4. System Requirements
Input source equipment connected with output displays through CAT 5 cable.
5. Features
Supports five outputs (three from CIR-03, two from CIR-12).
Control source equipment anywhere within 250 meters, even through walls
and ceilings.
Transmits infrared signals only.
It allows the use of existing remote controls.
Only one IR Receiver is needed.
IR Receiver's frequency is at 20~60 KHz.
1
6. Operation Controls and Functions
6.1 Front Panel
IR OUT1
CIR-03 IR Extender
IR OUT2 IR OUT3
IR IN
CIR-12 IR Repeater
12
IR OUT1, 2 and 3: Connect your IR Eye Blaster cables to control source
①
IR OUT1 IR OUT2
1
equipments.
IR IN: Connect to IR Eye receiver cable in order to receive IR remote
②
control signals.
Please be careful when plugging in the blaster and receiver cables as
Note:
a wrong connection will result in a cable and device overload.
6.2 Rear Panel
DC 5V
IR CAT5
12
IR CAT5: Connect the CAT 5 cable to Infrared Extender Box with IR
①
receiver.
Power: Plug the 5VDC power supply into the unit and connect the
②
adaptor to an AC outlet.
Only a power adapter is needed, connect the power adapter on
Note:
either the CIR-03 or CIR-12.
2
7. Connection and Installation
7m
3m
CIR-12
CIR-03
3m
IR CAT5
3m
3m
3m
3
A. The IR receiver can be controlled up to 7m away in open space with
Note:
an angle of 30 degrees.
B. IR extender's Control distance can go up to 3m in open space with
an angle of 30 degrees.
8. Specications
Input Port1 x IR receiver
Output Ports1 x CAT5 (CIR-03, CIR-12)
5 x IR extender (3 x CIR-03, 2 x CIR-12)
Power Supply2 x 5V/1A DC (US/EU standards, CE/FCC/UL
certified for CIR-12.)
Dimensions (mm)62(W) x 50(D) x 23(H)
Weight(g)78
Chassis MaterialAluminum
Silkscreen ColorSilver
Operating Temperature0°C ~ 40°C
Power Consumption0.5w
4
CYPRESS TECHNOLOGY CO., LTD.
Home page: http://www.cypress.com.tw
20081202 MPM-CIR03&CIR12
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.