CH-A1
Mini HDMI 3D Analyzer
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VS1 09/02/12 First Release
VS2 25/01/13 Updated Format
CONTENTS
1. Introduction ............................................ 1
2. Applications ........................................... 1
3. Package Contents ................................ 1
4. System Requirements ............................ 1
5. Features .................................................. 2
6. Operation Controls and Functions ....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel .........................................4
6.3 Top Panel ..........................................5
6.4 OLED Display .....................................7
6.5 OSD Menu .........................................8
6.6 Supported Timings Table ...............11
6.7 Supported Patterns Table .............12
7. Connection Diagram .......................... 13
8. Specications ...................................... 14
9. Acronyms ............................................. 16
1. INTRODUCTION
The Mini HDMI 3D Analyzer is a tool for checking both source (Blu-
ray or DVD players) and display devices (TV or monitors). With touch
button controls and built-in OLED display it can show the status and
information of both the input and output devices connected to it by
HDMI.
The analyzer can be used to analyze the input source device infoframe and output sink device EDID. It also has a built-in pattern
generator that can be used to test the capabilities of the output
device including 3D and resolution/timing support.
2. APPLICATIONS
• Apparatus testing
• Equipment checking
• EDID checking
• HDCP or 3D support verication
• Production testing
• R&D design and debug
3. PACKAGE CONTENTS
• Mini HDMI 3D Analyzer
• 5 V Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
HDMI input port connected to the source/HDMI system with HDMI
cable and HDMI output connected to the display/HDMI system with
HDMI and/or amplier.
1
5. FEATURES
• Supports Timing include SD, HD up to 1080p, PC up to WUXGA and 3D
• Provides 25 timings, 6 patterns and 1 pattern for 3D timing
• 'Deep color' video support (up to 12-bit, 1080p@60 Hz)
• Supports input signal bypass, digital video formats in 'Deep Color'
Mode up to 36-bit (12-bit/color) and new lossless compressed digital
audio (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio)
• Supports internal pattern audio LPCM 2CH 48/96/192 kHz, LPCM
5.1CH 48/96 kHz, LPCM 7.1CH 48/96 kHz
• Analyze the input source info-frame and output sink EDID
information
• Touch button control function
• OLED display shows Input/Output timing information
• Supports ARC (Audio Return Channel) following HDMI specications
• Supports 'Deep Color' (8/10/12-bit) output
• Supports HDCP repeater function and complaint with HDCP
• Supports CEC bypass
2
6. OPERATION CONTROLS AND FUNCTIONS
1
6.1 Front Panel
HDMI IN
1
HDMI IN
Connect the HDMI input port to the HDMI output port of the source
device for testing and displaying the EDID information.
2
DC 5V
Plug the DC 5 V power supply into the Mini-HDMI Analyzer and
connect the adaptor to an AC wall outlet.
DC 5V
2
3
6.2 Rear Panel
ARC OPTICAL OUT
SERVICE
1
1
SERVICE
Use a DB9 (RS-232) to 3.5 mm (phone jack) cable to do the
software upgrade.
NOTE: This feature is not available to the end user. The DB9 to 3.5 mm
phone jack is not included in the package.
2
ARC OPTICAL OUT
Optical digital out for testing the ARC function of a TV connected
to the HDMI. Connect to the optical digital input of an audio
system (such as an AV receiver) to monitor the audio output of the
attached sink device.
3
HDMI OUT
Connects the Analyzer to a display or to devices connected to the
display when testing the capabilities of the system.
2 3
HDMI OUT
4
6.3 Top Panel
1
2
3
4
PC/HD/3D
INT/EXT AUDIO
M
/
PATTERN TIMING
821 3 4 5 6 7
Note: Please remove the protective plastic lm from the top panel
before using the touch key function.
POWER
Press this button to turn on the device, the LED will turn blue. Press
again to switch the unit to standby mode, the LED will turn red.
INT/EXT
Press this button to toggle between the built-in internal pattern
generator or the external source device. The LED will illuminate in
blue when the external input is selected. To retrieve the external
EDID information, an external source device must be connected
otherwise the device will only generate the test patterns to display
on the TV/monitor.
PC/HD/3D
Press this button to cycle through the test patterns (PC/HD or 3D
timings). The OLED display will show the timing currently selected.
AUDIO
Press this button to select the audio sample rate from LPCM 2CH,
LPCM 5.1CH and LPCM 7.1CH 48 kHz or LPCM 2CH, LPCM 5.1CH
and LPCM 7.1CH 96 kHz or LPCM 2CH and LPCM 5.1CH 192 kHz.
Note: Press and hold for 3 seconds to select Audio mute function.
5
5
M/
Press this button to enter the main menu and/or to conrm the
selection.
6
PATTERN (▲/▼)
Press these keys to select the patterns or when in OSD manu press
these keys to select for option.
7
TIMING (▲/▼)
Press these keys to select the required timings.
8
OLED Display
Displays the relevant Information about attached devices. See
Section 8 for details.
6
6.4 OLED Display
2
1
48K 2CH ARC
1080P@60
5
H:1920 3DTB
3
4
6
1
Sampling Rate
The Analyzer supports audio sampling rates of 48/96/192 kHz,
display will show the signals current sample rate. If external audio is
selected the OLED will display 'BYPASS'.
2
Audio Channels
The device supports audio channels from LPCM 2, 5.1 and 7.1CH. If
external audio is selected the OLED will display 'BYPASS'.
Note: When the audio button is held down for 3 seconds, both 1
& 2 will show AUDIO MUTE.
3
ARC
Audio Return Channel, when this function is selected the OLED
display will show 'ARC' if an ARC signal is present.
4
V Timing
Please refer to the Timing Table in Section 9 for details of the
supported timing and V sync.
5
H Timing
Please refer to the Timing Table in Section 9 for details of the
supported H Sync.
6
3D Format
Only when the 3D pattern is selected, the OLED display will show
the pattern details.
Note: When in EXT Mode, the OLED display will show the input H/V
Sync with the timing frequency and 3D pattern if any.
7
6.5 OSD Menu
Press the
display.
• Press pattern’s [▲/▼] to highlight on option
• Press
System Info
Press this button to show the EDID information for any connected
device. When an output display is connected, press this button
repeatedly to bring up the patterns for display (Refer to Section 10 for
pattern details).
button from the device to bring up the OSD on the
M/
[M/]
to conrm the selection
Press
[M/]
software version.
to check the input/output device information and
8
Sink Edid
OPTION DESCRIPTION
Block Data To check the sink Block0 and
Block1's EDID table
Description To check the sink description of
EDID
Source Infoframe
OPTION DESCRIPTION
AVI (AVI infoframe data) To check the source video
infoFrame Packet
AUD (Audio infoframe data) To check the source audio
infoFrame Packet
CEC Command
OPTION DESCRIPTION
Stand By To set the source to standby mode
Active Source To turn on the source
Monitor (Read) To detect the command data on
the CEC Bus
Note: Source equipment must support CEC function in order to
activate this function.
9
Audio Return
OPTION DESCRIPTION
Audio Return On/Off
Deep Color Set
OPTION DESCRIPTION
8-bit On/Off
10-bit On/Off
12-bit On/Off
Note: The device will auto-detect the sink device's 'Deep Color' setting
and if any of the settings are not supported, the option in the Deep
Color set will not be selectable.
Exit
Select to Exit the OSD menu.
10
6.6 Supported Timings Table
NO. TIMING V (HZ)
T01
480p
T02
480i
T03
720P
T04
1080i
T05
1080p
T06
576i
T07
576p
T08
720p
T09
T10
1080i
T11
1080p
T12
1080p
T13
640×480
T14
800×600
T15
1024×768
T16
1280×1024
T17
T18
1920×1200
T19
720p (3D Frame Packing)
T20
720p (3D Side-by-Side)
T21
720p (3D Top-and-Bottom)
T22
720p (3D Frame Packing)
T23
720p (3D Side-by-Side)
T24
720p (3D Top-and-Bottom)
T25
1080p (3D Frame Packing)
1080p (3D Side-by-Side)
1080p (3D Top-and-Bottom)
60
60
60
60
60
50
50
50
50
50
24
60
60
60
60
60
60
60
60
50
50
50
24
24
24
11
6.7 Supported Patterns Table
GROUP NO. PATTERN DESCRIPTION
1
Primary Colors: Red,
Green, Blue
Standard
Type
2
P1: Red
P2: Green
P3: Blue
3
4
5
P4: Horizontal RGB Bar
P5: H Grey Scale
P6: HDCP Handshaking
6
and Link-integrity Test
12
GROUP NO. PATTERN DESCRIPTION
P7 (FP): Frame Packing
Non-3D Display
*7(FP)
P7 (FP): Frame Packing
3D Display
P7 (SH): Side-by-Side (Half)
Non-3D Display
3D
Type
*7 (SH)
P7 (SH): Side-by-Side (Half)
3D Display
13
P7 (TB): Top-and-Bottom
Non-3D Display
*7(TB)
P7 (TB): Top-and-Bottom
3D Display
1080P@60
H:1920
48K 2CH
7. CONNECTION DIAGRAM
For checking both the source and display device's information, press
M/to display the System Information.
48K 2CH
1080P@60
H:1920
Monitor or
HDMI 3D TV
For checking only the display device's supported timings, connect the
HDMI output only to the display device and press the PATTERN and
TIMING buttons.
48K 2CH
1080P@60
H:1920
DVD or Blu-ray
Player
Monitor or
HDMI 3D TV
Amplier
14
8. SPECIFICATIONS
TMDS Clock Frequency 225 MHz
Input Port 1×HDMI (Female type)
Output Port 1×HDMI (Female type)
EXT Mode (HDMI input)
HDMI Resolution 480i/p, 576i/p, 720p ~ 1080p
PC Resolution VGA ~ WUXGA
INT Mode (Internal pattern)
HDMI Resolution 480i/p, 576i/p, 720p ~ 1080p
PC Resolution VGA ~ SXGA & WUXGA
3D Resolution Frame Packing (1080p@24,720p@50/60 )
Side-by-Side (Half) (1080p@24, 20p@50/60)
Top-and-Bottom (1080p@24/, 20p@50/60)
Audio Format 480i/p, 576i/p or VGA~SVGA support
LPCM 2CH 48/96/192 kHz, LPCM 5.1CH
48 kHz, LPCM 7.1CH 48 kHz
720p~1080p or XGA~WUXGA support
LPCM 2CH, 48/96/192 kHz, LPCM 5.1CH
48/96 kHz, LPCM 7.1CH, 48/96 kHz
HDMI Cable In 15 m@1080p/8-bit, 10 m@1080p/12-bit
HDMI Cable Out 15 m@1080p/8-bit, 10 m@1080p/12-bit
ESD Protection Human Body model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Power Supply 5 V/1 A DC (US/EU standards, CE/FCC/UL
certied)
Dimensions 119.5 mm (W)×70 mm (D)×25 mm (H)
Weight 128 g
Chassis Material Plastic
Silkscreen Color Black
15
Operating Temperature 0 ˚C~40 ˚C/32 ˚F~104 ˚F
Storage temperature −20 ˚C~60 ˚C/−4˚ F~140 ˚F
Relative Humidity 20~90 % RH (no condensation)
Power Consumption 4 W (Max)
Note:
1. This system was tested with 24AWG cables if using cables of
another type, the performance of this system may be different.
2. Cable distance tested with a PS3 and 40″ Samsung UA40B700 12-
bit LED TV.
3. Figures provided in this manual are for reference only, actual
gures may depend on the source and display used along with
the cables specications.
9. ACRONYMS
ACRONYM COMPLETE TERM
3D 3 Dimension
ARC Audio Return Channel
CEC Consumer Electronic Control
EDID Extended Display Identication Data
HD High Denition
HDCP High-bandwidth Digital content protection
HDMI High-Denition Multimedia Interface
OLED Organic Light Emitting Diode
SD Standard Denition
16
CYPRESS TECHNOLOGY CO., LTD
Home page: http://www.cypress.com.tw
Loading...