CYPRESS CH-507TX, CH-507RX User Manual

CH-507TX & RX

HDMI to CAT5e/6 with LAN/IR/RS-232

Operation Manual

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.

Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.

COPYRIGHT NOTICE

No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

© Copyright 2011 by Cypress Technology.

All Rights Reserved.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this
equipment:

• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.

• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

VS1 29/02/12 First Release

VR2 02/03/12 PoE Support (Brand only)

VS3 23/03/12 Amended PoE function

Updated the connection diagram

and the specications table

VR4 16/04/12 Add IR Distance

CONTENTS

1. Introduction ............................................ 1

2. Applications ........................................... 1

3. Package Contents ................................ 1

4. System Requirements ............................ 1

5. Features .................................................. 2

6. Operation Controls and Functions ....... 3

6.1 Transmitter Front and Rear Panels .. 3

6.2 Receiver Front and Rear Panels ..... 4

6.3. D-Sub 9 Pin Denitions ....................5

7. Connection Diagram ............................ 6

8. Specications ........................................ 7

9. Acronyms ............................................... 8

1. INTRODUCTION

The HDMI with RS-232 over Single CAT5e/6 transmitter and receiver set
can send uncompressed audio/video over a single run of CAT5e/6

cable up to 100 m with PoE feature and the added benet of control

through the built-in RS-232 and IR ports and a bi-directional LAN
connection.

2. APPLICATIONS

• Household entertainment sharing and control

• Lecture room display and control

• Showroom display and control

• Meeting room presentation and control

• Classroom display and control

3. PACKAGE CONTENTS

• 1×HDMI to CAT5e/6 (with LAN/IR/RS-232) Transmitter

• 1×CAT5e/6 to HDMI (with LAN/IR/RS-232) Reciever

• 1×IR Blaster

• 1×IR Receiver

• 1×24 V/1.25 A DC Power Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

Input HDMI source equipment such as DVD/Blu-ray player and HDMI
equipped output display (TV or monitor).

1

5. FEATURES

• HDMI 1.4 with 3D, 4k×2k support, HDCP & DVI Compliant

• Supports CEC bypass

• Simultaneous transmission of uncompressed data over a single

100 m/328 ft CAT5e/6 cable

• Uncompressed video 1080p, 60 Hz, 36-bit

• Audio support up to 7.1CH & Dolby TrueHD, DTS-HD

• 5Play™ convergence: HDMI, LAN, PoE & Control (IR & RS-232)

• Installation Friendly

Note:

1. This system was tested with CAT6/23AWG cables, results may vary

with cables of a different specication.

2. The PoE function is designed for powering compatible receiver
units only—non-PoE receivers will need their own power supply.

Receivers of another brand may not be compatible.

2

6. OPERATION CONTROLS AND FUNCTIONS

RearFront

1

2

3

4

5

6

7

8

9

6.1 Transmitter Front and Rear Panels

HDMI In

Transmitter

RS-232 In

LAN

HDMI to CAT5e/6 with LAN/IR/RS232

2 31 64 7 8 95

Power

DC 24V

IR1 Blaster

IR2 Extender

Link

CAT5e/6 Out

HDMI In: Connect to HDMI source equipment such as a DVD or Blu-

ray player.

LAN: Connect to an internet or network connection.

RS-232 In: Connect to a PC or laptop with D-Sub 9 pin male cable

for the transmission of RS-232 commands.

Power LED: This blue LED will illuminate when the device is

connected to a power supply.

DC 24V: Plug the 24 V DC power supply into the unit and connect

the adaptor to an AC outlet.

IR 1 Blaster: Connect to the supplied IR blaster cable for IR signal

transmission. Place the IR blaster in direct line-of-sight of the
equipment to be controlled.

IR 2 Extender: Connect to the supplied IR receiver cables for IR

signal reception. Ensure that remote being used is within the direct

line-of-sight of the IR extender.

Link LED: The yellow LED will illuminate when both the input and

output signals are connected.

CAT5e/6 Out: Connect to the reciever unit with a Single CAT5e/6

cable for tranmission of all data signals.

3

6.2 Receiver Front and Rear Panels

RearFront

2 31 65 7 84

1

2

3

4

5

6

7

8

HDMI Out

LAN

CAT5e/6 to HDMI with LAN/IR/RS232

RS-232 Out

Receiver

Power

IR2 Blaster

IR1 Extender

Link

CAT5e/6 In

HDMI Out: Connect to a HDMI equipped TV/monitor for display of

the HDMI input source signal.

LAN: Connect to a PC or Laptop to the Internet or network

connection.

RS-232 Out: Connect to the device that is to be controlled (via

D-Sub 9 pin female cable) by RS-232 commands.

Power LED: This blue LED will illuminate when the device is

connected to a power supply.

IR 2 Blaster: Connect to the supplied IR blaster cable for IR signal

transmission. Place the IR blaster in direct line of sight of the
equipment to be controlled.

IR 1 Extender: Connect to the supplied IR receiver cables for IR

signal reception. Ensure that remote being used is within the direct

line-of-sight of the IR extender.

Link LED: The yellow LED will illuminate when both the input and

output signals are connected.

CAT5e/6 In: Connect to the transmitter unit with a Single CAT5e/6

cable for tranmission of all data signals.

4

6.3. IR Cable Pin Assignment

IR Blaster

1

Power 5 V

IR Blaster Signal

2

3

NC

IR Receiver

6.4. D-Sub 9 Pin Denitions

Pin Dene TX / RX

1 N/C

2 TxD / RxD

3 RxD / TxD

4 N/C

5 GND

6 N/C

7 N/C

8 N/C

9 N/C

IR Signal

1

Power 5 V

2

Grounding

3

5

7. CONNECTION DIAGRAM

3m 3m

IR Extender

IR Extender

3m 3m

DVD or Blu-ray Player

1.5m

60°

IR Blaster

7m

60°

60°

7m

IR Blaster

60°

1.5m

Power

Supply

HDMI

HDMI

Internet Modem

or Router

CAT5e/6

RS-232

Transmitter

RS-232 In

HDMI In

LAN

HDMI to CAT5e/6 with LAN/IR/RS232

IR1 Blaster

Link

Power

DC 24V

IR2 Extender

CAT5e/6 Out

TX

RS-232 Equipped

PC or Notebook

IR2 Blaster

Power

Link

IR1 Extender

AT5e/6 In

C

RX

Receiver

RS-232 Out

HDMI Out

LAN

CAT5e/6 to HDMI with LAN/IR/RS232

RS-232

RS-232 Equipped

HDMI Switcher

TV or Monitor

CAT5e/6

Notebook

6

8. SPECIFICATIONS

Video Bandwidth 300MHz / 9Gbps

Ethernet Speed 100 Mbps

Transmitter

Input 1×HDMI, 1×IR Extender,1×RS-232, 1×LAN

Output 1×CAT5e/6, 1×IR Blaster

Receiver

Input 1×CAT5e/6, 1×IR Extender

Output 1×HDMI, 1×RS-232, 1× IR Blaster, 1× LAN

HDMI In/Out Cable

Distance

CAT6 In/Out Cable

Distance

HDMI In/Out Supports

Resolution

IR Frequency 30~50 kHz

ESD Protection Human Body Model:

Power Supply 24 V/1.25 A DC (US/EU Standards, CE/FCC/

Dimensions 102 mm (W)×113 mm (D)×25 mm (H)/TX

Weight 252 g (TX), 256 g (RX)

Chassis Material Aluminum

Silkscreen Color Silver

Power Consumption 13 W

Operating Temperature 0 °C~40 °C/32 °F ~104 °F

Storage Temperature −20 °C~60 °C/−4 °F~140 °F

Relative Humidity 20~90 % RH (non-condensing)

Up to 10 Meters

Up to 100 Meters

480i~1080p@50/60, 1080p@24,
VGA~WUXGA

±8 kV (air-gap discharge)

±4 kV (contact discharge)

UL certied)

102 mm (W)×107 mm (D)×25 mm (H)/RX

7

9. ACRONYMS

ACRONYM COMPLETE TERM

CAT5e Category 5 Cable

CAT6 Category 6 Cable

CEC Consumer Electronics Control

DVI Digital Visual Interface

HDCP High-bandwidth Digital Content Protection

HDMI High Denition Multimedia Interface

IR Infrared

8

CYPRESS TECHNOLOGY CO., LTD

Home page: http://www.cypress.com.tw