CH-108 CAT6 to
CAT6 Repeater
Operation Manual
CH-108
TABLE OF CONTENTS
1. Introduction................................................................................. 1
2. Features...................................................................................... 1
3. Package Contents..................................................................... 1
4. Operation Controls and Functions............................................ 1
4.1 Front Panel............................................................................. 1
4.2 Rear Panel..............................................................................2
5. Connection and Installation...................................................... 2
6. Specifications............................................................................. 3
1. Introduction
This is the most advanced solution for CAT6 to CAT6 signal repeater. These
two CAT6 connectors are for Video and DDC ports of transmitter and
receiver which isolates the DDC capacitances of the two sides of the
buffer. This is compatible with HDMI v1.3 specifications, a cutting-edge
technology which defines the supports to transfer Deep Color (12
bits/color) video and new lossless compressed (Dolby TrueHD, Dolby Digital
Plus and DTS-HD Master Audio) digital audio.
2. Features
●
HDMI 1.3, HDCP 1.1 and DVI1.1 compliant.
●
Serial data rate at up to 2.25Gbps, capable of supporting the following
digital video formats in Deep Color Mode at up to 36 bits (12bits/color):
●
DTV resolutions: 480i, 576i, 480p, 576p, 720p, 1080i to 1080p.
●
Supports CAT-6 cables for data/DDC transmission.
●
Supports equalize and recover incoming TMDS data before re-transmitting
them with optimal quality regardless of the incoming signal quality.
●
Supports high definition resolution, the cable distance test with 1080p/8bits
resolution the Input/Output source can run up to 45/45 meters. If
1080p/12bits resolution the Input/Output source can run up to 15/15
meters.
●
Supports CEC bypass.
●
Supports xvYCC.
3. Package Contents
●
CAT6 to CAT6 Repeater.
●
Operation Manual.
4. Operation Controls and Functions
4.1. Front Panel
1 DDC input: Connect the DDC input to the DDC output of the transmitter
using CAT-6 cable.
2 Video input: Connect the video input to the video output of the
transmitter unit using CAT-6 cable.
1
1 2
VIDEO DDC
CAT6 INPUT
2
4.2. Rear Panel
1 Video output: Connect the video output to the video input of the receiver
unit using CAT-6 cable.
2 DDC output: Connect the DDC output to the DDC input of the receiver
unit using CAT-6 cable.
5. Connection and Installation
6. Specifications
Input Ports 1 x HDMI, 1 x DDC
Output Ports 1 x HDMI, 1 x DDC
Dimensions (mm) 50(W) x 72(D) x 23(H)
Weight(g) 106
Chassis Material Aluminum
Silkscreen Color Black
Operating Temperature 0°C ~ 40°C
1 2
DDC VIDEO
CAT6 OUTPUT
HDMI LCD TV/
DDC
CH-108
DVD/DDC/VIDEO
HDMI
Cable
HDMI
Cable
Video
DDC
Video
DDC
CH-103TX
2008.1.14 MPM-CH108
Loading...