DVI SPLITTER
The CDVI-2H is a 1-input 2-output digital DVI splitter
based on PanelLink digital technology.
CDVI-2H
Operation Manual
Applications
- It accepts DVI signal from a computer or video equipment and splits up to two,
identical and buffered outputs. Each of the output can run up to 15 meters using
standard DVI cable.
- It also supports a wide range of input resolution (25~165 MHz) from VGA to UXGA.
- Can be cascaded up to 3 tiers.
The package includes
1x CDVI-2H DVI Splitter- User Manual
- 5 VDC power supply with universal plugs.
Features
- HDCP compliant.
- Universal EDID built-in
- Supports DVI-D (29-pin) standard connectors.
- DVI DDC (Display Data Channel) link between each output
and display is independent .
- LED indicators.
- Supports high resolution input:
PC: VGA, SVGA, XGA, SXGA and UXGA, &
HDTV: 480p, 576p, 720p, 1080i and 1080p@ 60Hz
Connection and Installation
Front Panel
DVI IN
CDVI-2H DVI SPLITTER/HDCP
1
SYNC
2 3
DC 5V
Power
4
1. DVI input port: Connects to the DVI output of your source equipment.
2. Sync LED: Sync led will light up when source signal is connected.
3. LED : Power LED will light up when power plug on.
4. Power Jack.
5. DVI output port 1: Connects to the DVI input of your display 1.
6. DVI output port 2: Connects to the DVI input of your display 2.
Rear Panel
DVI OUT DVI OUT
1 2
5
6
Specifications
Input connector: 1 input (DVI Female)
Output connector: 2 inputs (DVI Female)
Frequency bandwidth: 1.65Gbps (Single link)
Power consumption: 6W Max
Operating temperature rang: 5 degree to 40 degree C
Operating humidity range: 30 to 80% RH
Power supply: 5VDC power supply with universal plugs
Dimensions: 102(W) x125(D) x 30(H)mm
Weight: 280g
Connection and Installation
DVD or Set-Top Box
PC
or
DVI Cable
DVI Cable
DVI Cable
PC Monitor
DVI IN
DVI OUT DVI OUT
1 2
SYNC
Power
DC 5V
DVI Cable
LCD TV, Projector
DVI-D Pin Configuration
DVI-Digital (DVI-D):
and display.
This interface is designed for a 12 or 24-pin connection to enable
single or dual-link mode activation.
Supports display-only connections between the host computer
1
9
17 24
8
Receptacle Connector
DVI-D
Digital-Only Connector Pin Assignments
Pin Signal Assignment Pin Signal Assignment
T.M.D.S Data2-
1
T.M.D.S. Data2+
2
T.M.D.S. Data2/4 Shield
3
T.M.D.S. Data4-
4
T.M.D.S. Data4+
5
DDC Clock
6
DDC Data
7
No Connect
8
T.M.D.S. Data1-
9
T.M.D.S. Data1+
10
T.M.D.S. Data1/3 Shield
11
T.M.D.S. Data3-
12
T.M.D.S. Data3+
13
+5V Power
14
Ground (for +5)
15
Hot Plug Detect
16
Pin Signal Assignment
T.M.D.S. Data0-
17
T.M.D.S. Data0+
18
T.M.D.S. Data0/5 Shield
19
T.M.D.S. Data5-
20
T.M.D.S. Data5+
21
T.M.D.S. Clock Shield
22
T.M.D.S. Clock+
23
T.M.D.S. Clock-
24
Loading...