The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
For those who want to display large content the 1x3 DisplayPort Extender
Splitter is for you. Able to extend an image onto 2 or 3 displays, this device
is perfect for multi-tasking, but can also split an image so the same image is
repeated on up to three connected displays. This 1 by 3 DisplayPort Extender
Splitter allows users to enjoy images or video in HD resolution up to 1920 x 1200
on multiple monitors from a single digital output port. The 1 by 3 DisplayPort
Extender Splitter is a useful device for extending displays and splitting images.
2. Applications
Home & ofce display
Gaming
3. Package Contents
1 by 3 DisplayPort Splitter
3.3V DC Power Supply
Operation Manual
4. System Requirements
Input source equipment such as a PC or any DisplayPort output device with a
DisplayPort connection cable.
Output display such as a PC monitor or any DisplayPort input display with
DisplayPort connection cable.
5. Features
Supports DisplayPort v1.1a, VESA DDM Standard,
HDCP v1.3 and EDID v1.4
Supports link rates of 2.7Gbps (HBR) and 1.62Gbps (RBR) from the
source.
Fully HD compatible and provides full display performance with zero lag
and no display application limitations
Does not require software updates
Quality Lab (WHQL) testing/qualication
Supports output resolutions up to 1920 x 1200
Works with any desktop and notebook computer which have a DisplayPort
output port
Provides exceptional Secured Content Protection with HDCP 1.3 for digital
content including video and audio
Plug and Play
Note: This device only supports DisplayPort output and does not support level
shift conversion to an HDMI signal
1
6. Specications
Output Resolution1920 x 1200 / 1920 x 1024
Input port1 x DisplayPort
Output ports3 x DisplayPort
Power Supply 3.3V / 1.5A DC (US/EU standards, CE/FCC/UL certied)
ESD Protection
Dimensions(mm)100 (W) x 70 (D) x 20 (H)
Weight(g)90
DP OUT 1~3: Connect these slots with the output displays Display port
①
input port in order to send a signal.
It is suggested to use the same type/model of display in order
Note:
to get the optimal image quality. When the input source’s timing is
matched with the output display’s timing, the device will rst
extend the image according to the numbers of the output connected. If the input sources timing does not match with output
display’s timing the device will then split the signal to match the
number of the connected display to show an identical image.
(Detail information please refer to section 8. Timing table for monitors).
7.2 Right Panel
POWER
DC 3.3V
OFF ON
DP IN
123
On/off switch: Push this switch to turn the device on or off. The green LED
①
will turn on when the device is switched on.
DC 3.3V: This slot is where you plug the 3.3V DC power supply into the
②
unit and connect the adaptor to an AC outlet.
DP IN: This slot is where you connect the input source equipment such as
③
a PC or any output device that has a DisplayPort.
3
7.3 Top Panel
21
LINK
POWER
CDP-13DPI
1x3 DisplayPort Extender Splitter
OUT
321
3
LINK LED: The green LED will turn on when the input source device is
①
connected.
POWER LED: The green LED will switch on when the device is powered on.
②
OUT 1~3 LED: The green LED will turn on when the output port is
③
connected with the output display.
4
8. Timing tables for monitor
The 1 by 3 DisplayPort splitter is a smart device with a built in feature that can
dene which and how many monitors are connected and can transmit the
proper signal for the display. Below is the expanded timing list which is sup-
ported by the device.
Two monitors mode
From PCTo monitorVertical refresh rate (Hz)
3840 x 12001920 x 120060
2560 x 10241280 x 102460
2048 x 7681024 x 76860
3360 x 1050 * 11680 x 105060
3200 x 1200 * 11600 x 120060
2880 x 900 * 11440 x 90060
1600 x 600 * 1800 x 60060
1280 x 480 * 1640 x 48060
2800 x 1050 * 11400 x 105060
Three monitors mode
From PCTo monitorVertical refresh rate (Hz)
3840 x 8001280 x 80060
3840 x 10241280 x 102460
3072 x 7681024 x 76860
2400 x 600 * 1800 x 60060
1920 x 480 * 1640 x 48060
4080 x 768 * 1, * 21360 x76860
3840 x 720 * 11280 x 72060
2160 x 480 * 1720 x 48060
3840 x 960 * 11280 x 96060
Note:
*1. The timing is listed out in EDID extension block. Some old GPU driver
may not support it.
*2. The total horizontal pixel include the active area and blank area is
large than 4096, some GPU driver may not support the timing.
5
9. Connection and Installation
Dell PC/Notebook
Dell Monitor
Dell Monitor
Dell Monitor
or
Dell Monitor
6
Dell Monitor
Dell Monitor
Acronyms
AcronymComplete Term
EDID Extended display identication data
GPUGraphics Processing Unit
HDCP High-bandwidth Digital Content Protection
A
7
CYPRESS TECHNOLOGY CO., LTD.
Home page: http://www.cypress.com.tw
20100329 MPM-CDP-13DPI
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.