CA-USBAT &
CA-USB100R
USB over CAT5 Transmitter
and Receiver Box
Operation Manual
CA-USBAT & CA-USB100R
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2009 by Cypress Technology.
All Rights Reserved.
Version 1.0 October 2009
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
V1 20091008 Preliminary Release
Table of Contents
1. Introduction ..................................................................................1
2. Applications ................................................................................. 1
3. Package Contents ......................................................................1
4. System Requirements ..................................................................1
5. Features ........................................................................................1
6. Specifications ..............................................................................2
7. Operation Controls and Functions ............................................. 3
7.1 Transmitter’s Panel ........................................................... 3
7.2 Receiver’s Front Panel ................................................. 3
7.3 Receiver’s Rear Panel ................................................. 4
8. Connection and Installation ..................................................... 5
1. Introduction
With USB being the standard connection for consumer electronic products,
there has long been a need for something to let us operate our many
devices over long distances. The USB over CAT5/6 transmitter and receiver
boxes developed for this purpose as they can operate in both the home and
commercial markets. These devices allow any USB host to send data within a
100-meter distance while offering up to 4 USB outputs, giving this product the
ability to act like a USB hub. In addition, this product can also save data from
the output port devices or allow remote control through the display even when
there's 100 meters separating the devices. The USB over CAT5/6 transmitter and
receiver boxes are the ideal choice for your USB extension needs.
2. Applications
• USB Extension over CAT5/6 100m
• Control devices from far away
• Host device information sharing and control
3. Package Contents
• CA-USBAT x 1
• CA-USB100R x 1
• USB Cable x 1
• Adaptor x 2
• Operation Manual x 1
4. System Requirements
PC or laptop with CAT5/6 cables and devices with USB cables.
5. Features
• Supports USB 2.0 high-speed and USB 1.1 (full-speed, low-speed) devices
• Operate with USB 2.0 high speed host controllers and USB 1.1 classic hosts
• True plug and play without the need to install drivers
• Supports all major operating systems including Windows®, MAC OS
®
, and
Linux
• Display or control the host device
• CAT5 cable distance tested up to 100 meters without lag
• Simple set up and operation
• Each USB output port contains 500 mA of power
• Total transmission frequency 1G Hz
1
Transmitter
Input Port 1 x USB (B type)
Output Port 1 x RJ45
Receiver
Input Port 1 x RJ45
Output Ports 4 x USB (A type)
ESD Protection
Human body model: ± 10kV (air-gap discharge)
± 6kV (contact discharge)
Power Supply 5V / 3.2A (US/EU standards, CE/FCC/UL certied)
Dimensions(mm) 102 (W) x 95 (D) x 25 (H)
Weight(g) 214 / Transmitter, 220 / Receiver
Chassis Material Aluminum
Silkscreen Color Silver
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Power Consumption 5W / Transmitter, 12W / Receiver
Relative Humidity 20~90% RH (non condensing)
6. Specications
2
7. Operation Controls and Functions
7.1 Transmitter’s Panel
POWER DC 5V
USB IN
1 2 3
RJ45 OUT
①
Power DC 5V Jack: Plug 5V 3.2A DC power supply into the unit and
connect the adaptor to an AC outlet.
②
USB IN: This slot is where you connect your PC or laptop with a USB A to B
type cable when sending signals or controlling the output of four USB
devices.
③
RJ45: This slot is where you connect a CAT5/6 cable, with the receiver
unit, up to 100 meters away.
7.2 Receiver’s Front Panel
1
USB OUT 1
USB OUT 2
USB OUT 3 USB OUT 4
CA-USB100R USB 1 BY 4 RECEIVER
①
USB OUT 1~4: These slots are where you connect your devices, such as
keyboards, mouse, printers, webcams or etc. with USB cables.
3
7.3 Receiver’s Rear Panel
RJ45 IN
1 2
POWER
DC 5V
①
Power DC 5V Jack: Plug the 5V DC power supply into the unit and
connect the adaptor to an AC outlet.
②
RJ45: This slot is where you connect a CAT5/6 cable, with the transmitter
unit, up to 100 meters away.
4
8. Connection and Installation
USB
PC
Flash MP4Keyboard Mouse DV hard drive Monitor
Scanner Printer
CA-USB100R
CA-USBAT
CAT5/6 150m
5
Acronyms
A
Acronym Complete Term
CAT5/6 Category 5 / 6 Cable
ESD Electrostatic Discharge
LED Light-emitting Diode
RJ45 Registered Jack 45
USB Universal Serial Bus
6
7
MPM-CAUSBAT100R
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.
Loading...