Cypress CA-HDMIAT Operation Manual

Page 1
HDMI Over CAT5
Transmitter
Operation Manual
CA-HDMIAT
Page 2
Disclaimers
The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document. Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer le, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual, or otherwise - without express written permission and consent from Cypress Technology.
© Copyright 2010 by Cypress Technology. All Rights Reserved. Version 1.0 December 2010
Trademark Acknowledgments
All products or service names mentioned in this document may be trademarks of the companies with which they are associated.
Page 3
Safety Precautions
Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment:
Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide ventilation.
Revision History
Version No Date Summary of Change
VS1 20101201 Add HDCP Description
Page 4
Table of Contents
1. Introduction ……………………..……………………...…........….…….
2. Features …………………..........………………….……...................…..
3. Package Contents ………………………...........……….................…
4. Specications ……………..……….........………........................…….
5. Operation Controls and Functions ……………...……..............……
5.1 Front Panel ..............................................................................
5.2 Rear Panel .…………………………………..…….......…...….…
6. Connection and Installation ….………………….........…..…..…......
7. Acronyms …......................................................................................
1
1
1
2
3
3
3
4
5
Page 5
1. Introduction
This is the transmitter (Tx) unit of HDMI over CAT5 Tx/Rx solution, depends on the type of receiver (Rx) unit used, this HDMI over CAT5 transmitter can extend HDMI signal through CAT-5 cables for a distance up to 50/100/150/250 meters. The installation of HDMI Over CAT5 is easy and quick, simply place transmitter next to your HDTV source such as a DVD player, then place the receiver unit next to your display, and get all necessary cables connected to complete and enjoy.
2. Features
Compliant with HDMI 1.2, and DVI 1.0 specications
Supports CAT-5/CAT-5E/CAT-6 cables of variable types
Supports high denition input up to 1080P, output resolution follows input
Easy to install and simple to operate
Easy to install and simple to operate
Not compatible with HDCP Source
Notes:
that has HDCP encryption there will be no video output.
This product does not process HDCP input. When receiving content
3. Package Contents
HDMI Over CAT5 Transmitter
5VDC Power Supply Adaptor
Operation Manual
1
Page 6
4. Specications
Supported resolutions HDMI - 480i/480p, 576i/576p, 720P@50/60Hz,
1080i@50/60Hz, 1080p@50/60Hz
Input 1 x HDMI female port
Output 1 x CAT-5 output for VIDEO,
1 x CAT-5 output for DDC
Power 5V / 2.6A DC power supply
Dimensions 123(W) x 125(D) x 30(H)mm
Weight 700g
2
Page 7
5. Operation Controls and Functions
5.1 Front Panel
HDMI INPUT
HDMI INPUT: Connect the HDMI input port to the HDMI or DVI output of
your source equipment such as DVD player or set-top-box.
5.2 Rear Panel
VIDEO DDC
CAT5 OUTPUT
DC 5V
VIDEO OUTPUT: Connect the VIDEO output to the VIDEO input of the
receiver unit using CAT-5/CAT-5E/CAT-6 cable.
DDC OUTPUT: Connect the DDC output to the DDC input of the receiver
unit using CAT-5/CAT-5E/CAT-6 cable.
Power: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
3
Page 8
6. Connection and Installation
DVD Player
HDMI
STB
HDMI
OR
HDMI INPUT
Front
HDMI Cable
HDMI
VIDEODDC
CAT5 OUTPUT
HDMI Cable
HDMI
Transmitter unit Transmitter unit
Rear
VIDEO (CAT-5 Cable)
DDC (CAT-5 Cable)
DC 5V
50 Meters 100 Meters 150 Meters 250 Meters
VIDEO
DDC
CAT5 INPUT
Rear
DC 5V
HDMI OUTPUT
Receiver Unit
Front
HDMI
HDMI Cable
HDM
I
EQUALIZER1 2
CTI
250
MIN
150 100
ADJUST
50
GAIN
MAX
Receiver Unit
HDMI
4
Display
Page 9
Acronyms
Acronym Complete Term
A
5
Page 10
Page 11
Page 12
Cypress HDMI Over CAT5 Series:
Product Description
CA-HDMIAT HDMI Over CAT5 Transmitter
CA-HDMI 50R HDMI Over CAT5 Receiver at 50 meters
CA-HDMI 100R HDMI Over CAT5 Receiver at 100 meters
CA-HDMI 150R HDMI Over CAT5 Receiver at 150 meters
CA-HDMI 250R HDMI Over CAT5 Receiver at 250 meters
CYPRESS TECHNOLOGY CO., LTD.
Home page: http://www.cypress.com.tw
20070727 MPM-CAHDMIAT
Loading...