HDMI Over CAT5
Receiver
at 50 Meters
Operation Manual
CA-HDMI50
TABLE OF CONTENTS
1. Introduction................................................................................ 1
2. Features...................................................................................... 1
3. Package Contents.................................................................... 1
4. Operation Controls and Functions........................................... 2
4.1 Front Panel........................................................................... 2
4.2 Rear Panel........................................................................... 2
5. Specifications............................................................................ 3
6. Connection and Installation.................................................... 4
1. Introduction
Cypress CA-HDMI50R is the receiver (Rx) unit of HDMI over CAT5 Tx/Rx solution,
works with CA-HDMIAT (the transmitter), can extend HDMI signal through CAT-5
cables for a distance up to 50 meters. The installation of Cypress HDMI Over
CAT5 is easy and quick, simply place CA-HDMIAT next to your HDTV source such
as a DVD player, then place CA-HDMI50R next to your display, and get all
necessary cables connected to complete and enjoy.
2. Features
1. Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specifications.
2. Supports CAT-5/CAT-5E/CAT-6 cables of variable types.
3. Supports high definition input up to 1080P, output resolution follows input.
4. Easy to install and simple to operate.
3. Package Contents
1. Cypress CA-HDMI50 - HDMI Over CAT5 Receiver at 50 Meters
2. 5VDC Power Supply Adaptor
3. Operation Manual
1
1. Introduction
Cypress CA-HDMI50R is the receiver (Rx) unit of HDMI over CAT5 Tx/Rx solution,
works with CA-HDMIAT (the transmitter), can extend HDMI signal through CAT-5
cables for a distance up to 50 meters. The installation of Cypress HDMI Over
CAT5 is easy and quick, simply place CA-HDMIAT next to your HDTV source such
as a DVD player, then place CA-HDMI50R next to your display, and get all
necessary cables connected to complete and enjoy.
2. Features
1. Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specifications.
2. Supports CAT-5/CAT-5E/CAT-6 cables of variable types.
3. Supports high definition input up to 1080P, output resolution follows input.
4. Easy to install and simple to operate.
3. Package Contents
1. Cypress CA-HDMI50 - HDMI Over CAT5 Receiver at 50 Meters
2. 5VDC Power Supply Adaptor
3. Operation Manual
4.2 Rear Panel
4. Operation Controls and Functions
4.1 Front Panel
1. HDMI OUTPUT:
1. DDC INPUT:
2. VIDEO INPUT:
3. Power:
2
4.2 Rear Panel
4. Operation Controls and Functions
4.1 Front Panel
1. HDMI OUTPUT:
Connect the HDMI output port to the HDMI input of your display.
1
CAT5 to HDMI
50
HDMI OUTPUT
1 2 3
DDC
VIDEO
DC 5V
CAT5 INPUT
1. DDC INPUT:
Connect the DDC input to the DDC output of the transmitter unit using
CAT-5/CAT-5E/CAT-6 cable.
Note: For advanced user only, if it's known that the DDC or HDCP data are
not required for both source and the display, you can use a single CAT-5
cable for the VIDEO connection only.
2. VIDEO INPUT:
Connect the VIDEO input to the VIDEO output of the transmitter unit using
CAT-5/CAT-5E/CAT-6 cable.
3. Power:
Plug the 5VDC power supply into the unit and connect the adaptor to AC
wall outlet.
Connection and Installation
5. Specifications
3
1. Supported resolutions: HDMI - 480i/480p, 576i/576p, 720P@50/60Hz,
1080i@50/60Hz, 1080p@50/60Hz
2. Input: 1 CAT-5 input for VIDEO, 1 CAT-5 input for DDC
3. Output: 1 HDMI female port
4. Power: 5V DC power supply
5. Dimensions: 123(W) x 125(D) x 30(H)mm
6. Weight: 700g
Cypress HDMI Over CAT5 Series:
4
Connection and Installation
DVD Player
HDMI
Cable
HDMI
HDMI
HDMI
Cable
HDMI
Display
HDMI
HDMI
DDC (CAT-5 Cable)
50 Meters
VIDEO (CAT-5 Cable)
CA-HDMIAT
Front
CA-HDMI50R
Front
CA-HDMIAT
Rear
CA-HDMI50R
Rear
VIDEO DDC
DC 5V
CAT5 OUTPUT
HDMI to CAT 5
HDMI INPUT
CAT5 to HDMI
50
HDMI OUTPUT
DDC
VIDEO
DC 5V
CAT5 INPUT
Loading...