CYP SRS TruVolume AU-D6S Operation Manuals

AU-D6S

Volume Control Processor

OPERATION MANUAL

1. Introduction 1

2. Features 1

3. Operation Controls and Functions 2

3.1 Front Panel Diagram 2

3.2 Rear Panel Diagram 2

3.3 Side Panel Diagram 2

4. Connection Diagram 3

5. Specications 3

Table of Contents

Finden Sie ab Seite 5.

Introduction

The SRS TruVolume™ Audio Control Processor regulates TV-channel volume to the

listening level you’re most comfortable with, preventing annoying uctuations while

you channel surf as well as taming those obnoxious commercials. It also enables

you to hear everything that you’ve been missing when the volume is set to a lower

level.

Features

• SRS TruVolume™ maintains a steady volume, allowing listeners to set their

desired volume level once to enjoy television, music and all other content

without annoying volume uctuations.

• Simple Operation “On / Bypass”.

• Simple connection for easy installation (Stereo analogue in/out, Power).

• Supports Line Level Inputs up to 2Vrms and Line Level Outputs up to 1Vrms, via

stereo RCA jacks.

• Regulates TV / Satellite / Radio broadcast volume levels, so you don’t have to

constantly adjust it when you change channels.

• Connects between your TV / Stereo / Soundbar / AVR and cable box, BD/DVD

player, DVR/PVR/TiVo® or Satellite Receiver.

• Helps the hearing impaired by keeping channels at a consistent volume level so

they can hear everything while keeping others in the room comfortable.

• Powered via included external universal AC/DC adapter (input: 100V~240V AC,

50~60Hz; output: +5V DC).

• Boosts low and high-frequency content dynamically (20-bands/ch) using

an advanced psychoacoustic modelling engine, making the entire listening

experience come alive, regardless of the audio level.

Page 1

Page 2

3.1 Front Panel

3. Operation Controls and Functions

3.2 Rear Panel

1 L/R input: Connect L/R stereo analogue audio input port to the L/R source
equipment, such as Freeview.

2 L/R output: Connect L/R stereo analogue audio output to the display audio
input or audio equipment.

1 2

OUT RL

LRIN

1 2

DC 5V

OFF

ON

SRS TruVolume

3.3 Side Panel

1. SRS TruVolume: Switch SRS TruVolume On/Off.

2. Power: Plug 5V DC power supply into the unit and connect the adaptor to AC
wall outlet.