CYP SDV-FRX, COH-TX5, COH-RX5 Operation Manual
SDV-FTX/FRX
Ultra-HDMI (4K/60) over Fiber extender
OPERATION MANUAL
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 11/05/2018 First release
5
CONTENTS
1. Introduction ...........................................6
2. Applications ...........................................6
3. Package Contents ..................................7
4. System Requirements ...........................7
5. Features ..................................................8
6. Operation Controls and Functions .......9
6.1 Transmitter's Front Panel ........................ 9
6.2 Transmitter's Rear Panel ........................ 10
6.3 Receiver's Front Panel ............................11
6.4 Receiver's Rear Panel .............................. 12
6.5 Basic AV Extension ..................................13
6.6 Advanced AV Extension ........................14
7. Connection Diagram .......................... 18
8. Specifications ...................................... 19
8.1 Transmitter's Technical Specifications ... 19
8.2 Receiver's Technical Specifications ...21
9. Acronyms ............................................. 23
6
1. INTRODUCTION
This Transmitter and Receiver set is designed for high-quality, IP routable,
AV extension with minimum latency. By using a sophisticated ultralight compression scheme (lossless for most content) it’s a great solution
for extending 4K audio/video streams (HDMI or DisplayPort) and data.
Advanced HDMI content such as HDR (High Dynamic Range), 10-bit
colour and multi-channel HD Bitstream audio can be transmitted in
pass-through mode. The use of interchangeable, field replaceable, SFP+
modules allows for transmission distances of up to 30km (Maximum
transmission distance depends on the SFP+ modules used.). Multiple
control and data signals may also be transmitted along with the audio
and video, including IR, RS-232, USB (for KVM) and Ethernet.
When combined with the optional control center or control software,
the functionality of the extenders expands exponentially. Multiple
Transmitters and Receivers may be combined with one or more 10Gb
fiber Ethernet switch and the units can be used together to form a
distributed video matrix, a multi-viewer system, or a video wall system
adding to their flexibility in large event installations.
2. APPLICATIONS
Video, USB, Audio, LAN, IR, and RS-232 over fiber extension
Hotel or convention center display multi-monitor broadcast
Long distance data and video transmission immune to RF interference
Distributed video matrix system
Distributed video wall system
Remote KVM control of a system
7
3. PACKAGE CONTENTS
Transmitter
1×HDMI/DP over Fiber Transmitter
1×12V/3A DC Power Adaptor
1×Power Cord
1×Operation Manual
Receiver
1×HDMI/DP over Fiber Receiver
1×12V/3A DC Power Adaptor
1×Power Cord
1×Operation Manual
4. SYSTEM REQUIREMENTS
HDMI or DisplayPort source equipment such as media players, video
game consoles PCs or set-top boxes.
HDMI receiving equipment such as HDTVs, monitors or audio
amplifiers.
Analogue audio receiving equipment such as headphones, audio
amplifiers or powered speakers.
A 10 Gigabit fiber Ethernet network switch with jumbo frame and
IGMP snooping support is required for distributed video systems.
PC control software or control system hardware to configure
distributed matrix, video wall or multi-view systems. (Optional)
8
5. FEATURES
HDMI 2.0 and DVI 1.0 compatible
HDCP 2.2 and HDCP 1.x compliant
IP switchable with minimum latency (requires optional control center/
software)
Ultra-light compression, lossless for most content
Extension up to 30km (depending on the fiber module used)
Independent breakaway A/V matrix switching (requires optional
control center/software)
Video wall generation (requires optional control center/software)
Multi-view compositing (requires optional control center/software)
Supports pass-through of 10/12-bit HDR sources (Point-to-Point and
Genlock mode only)
Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,
Bitstream and HD Bitstream from HDMI or DisplayPort sources
Analogue stereo audio extension, insertion and extraction (insertion
and extraction requires optional control center/software)
Bi-directional RS-232, IR, & USB 2.0 extension
Data Transmission interfaces with 10 gigabit Ethernet via XFI, IEEE
802.3ae, compatible SFP+ fiber modules
Supports the use of an external control center or control software to
provide expanded functionality (Contact your authorised dealer for
more information)
Loading...