CYP QU-4M Operation Manual
QU-4M
v1.3 HDMI 1 to 4 Distribution
Amplier with System Reset
OPERATION MANUAL
Table of Contents
1. Introduction 1
2. Features 1
3. Operation Controls and Functions 2
3.1 Front Panel Diagram 2
3.2 Rear Panel Diagram 3
4. Connection Diagram 4
5. Specications 4
1. Introduction
Page 1
The Quantum HDMI v1.3 Distribution Amplier Series is the most advanced
solution to HDMI signal distribution. Each product in this series is compatible to
HDMI v1.3 specications, a cutting-age technology which denes the support
to transfer Deep Color (10-bit and 12-bit) video and new lossless compressed
(Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with
a high bandwidth up to 225MHz (6.75Gbps). Besides splitting and distributing,
the HDMI v1.3 DA series also does signal amplication and equalization, so as
to provide high performance I/O of audio and video.
2. Features
• 3D Ready.
• HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver.
• One HDMI source to connect up to four HDMI displays simultaneously.
• HDCP keysets allows each output to work independently when connecting to a
HDMI display.
• Splits a HDMI source up to four outputs without signal loss.
• Supports DVI source and DVI display by using HDMI to/from DVI adaptor cable.
• Supports a wide range of PC and HDTV resolutions from VGA to UXGA and 480i
to 1080p.
• High denition audio support: LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio transmission (32-192kHz Fs sample rate).
• HDMI cable distance test with 1080p/8bits resolution the, Input/Output source
can run up to 15/15 meters. If 1080p/12bits the Input/Output source can run
up to 10/15 meters.
• System reset function switch generates a command every 10 minutes to the
connected display which resets them to the correct HDMI input.
• Support CEC bypass.
• Deep color video up to 12bit, 1080p@(24/60)Hz.
• Selectable EDID source from TV (downstream) or STD (xed).
Loading...