CYP qu-2-4k22 Operation Manual

CPLUS-V2E

1 by 2 6G HDMI Splitter

Operation Manual

Operation Manual

QU-2-4K22

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this
equipment:

• Always follow basic safety precautions to reduce the risk of fi re,

electrical shock and injury to persons.

• To prevent fi re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.

• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for

suffi cient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE

RDV1 30/07/15 Preliminary release

RDV2 17/03/16 Add HDMI Cable Spec.

CONTENTS

1. Introduction ............................................ 1

2. Applications ........................................... 1

3. Package Contents ................................ 1

4. System Requirements ............................ 1

5. Features .................................................. 2

6. Operation Controls and Functions ....... 3

6.1 Front Panel ........................................3

6.2 Rear Panel .........................................4

7. Connection Diagram ............................ 5

8. Specifi cations ........................................6

8.1 Technical Specifi cations .................6

8.2 Supported Resolutions ..................... 7

9. Acronyms ............................................... 8

1

1. INTRODUCTION

The 1 by 2 HDMI Splitter with HDCP 2.2 is advanced solution for splitting
a single HDMI input to 2 HDMI outputs. It provides high performance

audio and video output through HDMI cables up to 4K2K@60Hz

(YUV444) resolution and is capable of provide high quality of audio
and video performance. It supports high resolution digital audio
formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby

Atmos and DTS-HD Master Audio, audio sampling rate up to 192kHz.

There are input and outputs indications on panel, which will illuminate
when detected, system reset function allows the unit trigger TV to
device’s HDMI input immediately.

2. APPLICATIONS

• Entertainment Room / Home Theater

• Show Room / Demo Room

• Lecture Room/Hall Presentation

• Show Room/Demo Room

• Public Commercial Display

3. PACKAGE CONTENTS

• 1×1 by 2 HDMI splitter

• 1×5 V/2.6 A DC Power Adaptor

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

Input source equipments such as Blu-ray/DVD/PS3 player or Set-Top-

Box or any 6G with HDCP2.2 source. And output with 6G HDMI TV/
Display and or audio amplifi er with connection cables.

Note: To achieve 6G performance will need to collocation with
particular HDMI cable to get the better quality.