CYP QU-18WE Operation Manual
QU-18WE
v1.3 HDMI 1 to 8
Mountable Splitter
OPERATION MANUAL
Table of Contents
1. Introduction 1
2. Features 1
3. Package Contents 1
4. Operation Controls and Functions 2
4.1 Front Panel Diagram 2-3
4.2 Bottom Panel Diagram 4
5. Connection Diagram 4
6. Specications 4-5
Page 1
1. Introduction
All the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect
solution to extend HDMI signals via CAT cabling up to 40m. For even longer
distances, use the PU-108 repeater, these can also be cascaded. The PU-1106 also
allows you to use your existing Remote Control to control your device with the
included IR Receiver & Blaster.
2. Features
• v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant.
• HDMI 1 to 8 Mountable Splitter.
• Resolutions supported: PC - VGA to UXGA; HDTV - 480i to 1080p plus
1080p24fps.
• High Denition Audio supported: Dolby TrueHD, Dolby Digital Plus and DTS-
HD Master Audio plus LPCM.
• Auto signal amplication & equalisation improves signal transmission
distances.
• Supports CEC bypass.
• Supports ‘Deep Colour’ (10 & 12 bit).
• Selectable EDID settings - TV (downstream) and STD (xed).
• System reset function switch generate a command every 10 minutes to the
connected display which resets them to the correct HDMI input.
3. Package Contents
• 1 by 8 HDMI 1.3 Splitter
• Power adaptor
• Operational Manual
Loading...