CYP QU-18S, QU-14S Operation Manual

QU-18S

v1.3 HDMI 1 to 8 Rack

Mountable Distribution Amplier

OPERATION MANUAL

Table of Contents

1. Introduction 1

2. Features 1

3. Operation Controls and Functions 2

3.1 Front Panel Diagram 2

3.2 Rear Panel Diagram 3

4. Connection Diagram 4

5. Specications 5

1. Introduction

Page 1

The QU-18S HDMI Distribution Amplier has a single HDMI input with 8 HDMI
outputs. The Silicon Image chipset based splitter is compatible with both Deep

Colour (10 & 12bit) and HD Audio. It boasts an extended HDMI output range of

up to 20 metres. EDID management is handled by a simple switch. A common
application of this product is in commercial and residential installations where one

HDMI source is required at multiple HDTV’s.

2. Features

• Compliant with v1.3 HDMI, HDCP 1.1 and DVI 1.1 standards.

• HDMI 1 to 8 Splitter.

• Resolutions Supported:

• PC: VGA to UXGA

• HDTV: 480i to 1080p, plus 1080p24fps.

• High Denition Audio supported: Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio, plus LPCM (32-192KHz sample rate).

• Auto signal amplication & equalisation improves signal transmission

distances.

• Support CEC bypass.

• Supports ‘Deep Colour’ (10 & 12 bit).

• Selectable EDID settings - TV (downstream) and STD (xed).

• Power, HDMI/DVI, HDCP & SYNC, plus independant output LED indicators.