Cyp PU-607BDWP-RX User Manual

PU-607BDWP-RX

OPERATION MANUAL

HDMI over Single CAT5e/6/7 HDBaseT™ - Bi-Directional PoC

Wallplate Receiver (full 5Play™ & Single LAN up to 100m)

DISCLAIMERS

The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.

COPYRIGHT NOTICE

No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.

© Copyright 2019 by CYP (UK) Ltd.

All Rights Reserved.

Version 1.1

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

3

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this
equipment:

• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.

• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 13/01/2014 First release

v1.01 31/03/2014 Corrected Contents List

v1.02 23/08/2019 Updated Specications

4

CONTENTS

1. Introduction ...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................6

5. Features ..................................................7

6. Operation Controls and Functions .......8

6.1 Receiver ......................................................... 8

6.2 Rear Panel ..................................................... 9

6.3 IR Cable Pin Assignment ......................10

6.4. D-Sub 9-Pin Denitions ........................ 10

7. Connection Diagrams ......................... 11

8. Specications ...................................... 13

8.1 Technical Specications ........................ 13

8.1 Cable Specications ...............................14

9. Acronyms ............................................. 15

5