CYP PU-106 Operation Manual
OPERATION MANUAL
PU-106
v1.3 HDMI over CAT6 Extender
Set with IR Pass-through
PU-106_Manual-EN.indd 1 26/04/2011 12:50:05
Table of Contents
1. Introduction 1
2. Features 1
3. Package Contents 1
4. Operation Controls and Functions 2
4.1 Front Panel Diagram 2
4.2 Rear Panel Diagram 3
5. Connection Diagram 4
6. Specications 4
PU-106_Manual-EN.indd 2 26/04/2011 12:50:19
Page 1
1. Introduction
All the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect solution
to extend HDMI signals via CAT cabling up to 40m. The PU-106 also allows you to use
your existing Remote Control to control your device with the included IR Receiver &
Blaster.
2. Features
• v1.3 HDMI, HDCP 1.1 and DVI 1.1 compliant.
• HDMI over CAT6 Extender Set.
• Resolutions supported: PC - VGA to WXGA; HDTV - 480i to 1080p plus
1080p24fps.
• High Denition Audio supported: Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio plus LPCM.
• Compatible with CAT-5E and CAT-6 cables. CAT-6 is recommended for better
performance.
• Supports CEC functions.
• Supports ‘Deep Colour’ (10 & 12 bit).
• Equalises and recovers incoming TMDS data before re-transmitting to ensure
optimum signal quality.
• Supports xvYCC
• Supports 3D signals
3. Package Contents
• HDMI to CAT6 Transmitter.
• 5V DC power supply adaptor.
• Operation Manual.
PU-106_Manual-EN.indd 1 26/04/2011 12:50:33
Loading...