CYP PRO-SDIHDMI, CLUX-SDI2HC Operation Manual

PRO-SDIHDMI

SDI to HDMI Converter

with SDI Bypass

OPERATION MANUAL

Safety Precautions

Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:

Always follow basic safety precautions to reduce the risk of



re, electrical shock and injury to persons.

To prevent re or shock hazard, do not expose the unit to rain,



moisture or install this product near water.

Never spill liquid of any kind on or into this product.



Never push an object of any kind into this product through



module openings or empty slots, as you may damage parts.

Do not attach the power supply cabling to building surfaces.



Do not allow anything to rest on the power cabling or allow it to



be abused by persons walking on it.

To protect the equipment from overheating, do not block the



slots and openings in the module housing that provide
ventilation.

Revision History

Version No Date Summary of Change

V1 20100607 Preliminary Release
VR2 20101202 Storage Tempeerature
VR3 20110704 Add Support Timing

Table of Contents

1. Introduction ..................................................................................1

2. Applications ................................................................................. 1

3. Package Contents ......................................................................1

4. Features ........................................................................................ 1

5. System Requirements ..................................................................1

6. Specifications ..............................................................................2

7. Operation Controls and Functions ............................................. 3

7.1 Front Panel ..................................................................... 3

7.2 Rear Panel ..................................................................... 4

8. Connection and Installation ..................................................... 5

1. Introduction

The SDI to HDMI converter allows SD-SDI, HD-SDI and 3G-SDI signals to be shown
on HDMI/SDI displays while ensuring high bit rates of 2.970 Gbit/s to give you fast
signal transmission without any loss. For professionals this means that it is now
easier to distribute and extend your 3G SDI signal while giving you the ability
to display your work on HDMI displays thanks to the built in HDMI converter.

Furthermore, thanks to the loop-through 3G-SDI design, users are able to enjoy

both SDI and HDMI displays at the same time.

2. Applications

• Connect to multiple displays by linking one 3G SDI Extender to another
through its SDI output port. When connected to another 3G SDI Extender,
you can broadcast a signal to two HDMI displays and one SDI display, or
connect to another Extender to provide more connections and a longer
operating distance.

• Convert 3G SDI to HDMI

3. Package Contents

• 3G SDI to HDMI Converter

• 5V/2.6A DC power adaptor

• Operation Manual

4. System Requirements

Input broadcast video with an SDI cable and output to SDI and/or HDMI
displays with included connection cables.

5. Features

• Operation at 2.970Gbit/s, 2.970/1.001Gbit/s, 1.485Gbit/s, 1.485/1.001Gbit/s
and 270Mbits/s

• Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE 292M,
SMPTE 259M-C

• Equalized and re-clocked loop output

• Integrated audio de-embedder for a maximum of 8 channel, 48 kHz audio

• Auto video mode detection (3G/SD/HD)

• Conversion from SMPTE 425M level B to Level A 1080p 50/59.94/60 4:2:2 10-bit

• Connect with other units to extend your signal over long distances

• Simultaneous display with SDI and HDMI signals

• Supports signal transmission distances of up to 300M for SDI signals, 200M for

HD signals and 100M for 3G signals

Note: Cable tested with Belden 1694A. Operating distances may vary if
used with another type of cable.

1