CYP OR-HD24S Operation Manual

OR-HD24S

v1.3 HDMI 2 x 4 Matrix Switcher

OPERATION MANUAL

Precautions

Failure to follow the precautions described below may cause damage to this v1.3

HDMI Matrix and void the warranty.

• DO NOT open the case. This will void the warranty, if you nd a problem with

this product, please return it to your retailer or seller who will assist you or

provide you with a solution.

• DO NOT use third-Party AC adaptors or power cords. This may damage the

Matrix.

• DO NOT bump, jar or drop the product because it may cause damage and void

the warranty.

• DO NOT allow liquids to come into contact with the Matrix because they may

cause damage.

Table of Contents

1. Introduction 1

2. Application 1

3. Package Contents 1

4. System Requirements 2

5. Features 2

6. Operation Controls and Functions 3

6.1 Rear Panel 3

6.2 Front Panel 4

7. Remote Control 5

8. RS-232 Protocol 6

8.1 Command Sets 7

10. Connection Diagram 8

11. Specications 9

Finden Sie ab Seite 9.

1. Introduction

Page 1

Thank you for purchasing this v1.3 HDMI Matrix. As HDMI products become
increasingly popular, users often have multiple HDMI sources and displays.
This HDMI matrix provides an excellent and convenient solution for connecting
all your HDMI equipment. You can select which source to view on each of the
displays using the remote control. This matrix can also transfer deep colour
video and bitstream audio with maximum performance. It supports v.1.3 HDMI,
HDCP 1.1 and DVI 1.0.

2. Application

• High performance v1.3 HDMI Matrix with 2 inputs and 4 outputs including a

remote for Infra red control, allowing you to link all your favourite HDMI devices

and enjoy your music, movies and games.

• Each of the two HDMI sources can be simultaneously directed to any of the four

HDMI Displays independently (e.g one source to screen 2, the other to screen

4).

• As the HDMI signal progresses through the system, it is re-timed, and level-

compensated.

• The HDCP & HDMI/DVI LEDs will illuminate accordingly to dene the input

source’s format.

• Switchable EDID function, choose between built in EDID or read the external

EDID of connected display.

3. Package Contents

• OR-HD24S v1.3 HDMI Matrix.

• CR33 Remote Control (with Battery)

• IR Receiver

• Power Cord

• 5V DC power supply adaptor.

• Operation Manual.

Page 2

4. System Requirements

HDMI source device(s) and HDMI display device(s).

5. Features

• v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant.

• Supports digital video formats in Deep Colour 12bit and new lossless digital

audio (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio).

• The HDMI input is compensated, clock / phase adjusted and jitter eliminated

so the output is a brand new standard HDMI signal.

• LEDs on each output to indicate which input is currently selected.

• Compatible with all HDMI sources and displays.

• Supports a wide range of PC and HDTV resolutions from VGA to UXGA

• and 480i to 1080p including 1080p24fps.

• Supports RS-232 control.

• Supports IR remote control and IR extender (via 3.5mm jack IR input).

• Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate).

• Supports LPCM7.1 channel audio from each independent HDMI output.

• At 1080p/8bit resolution, source to input cable length can be up to 10m,

output to display cable length can be up to 10m.

• At 1080p/12bit, the source to input cable length can be up 10m, Output to

display cable can run up to 6 metres.