CYP EL-5400-HBT Operation Manual

EL-5400-HBT

HDMI / VGA / Display Port Presentation Switch & Scaler

with HDMI & HDBaseT™ LITE Outputs

OPERATION MANUAL

3

DISCLAIMERS

The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.

COPYRIGHT NOTICE

No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.

© Copyright 2011 by CYP (UK) Ltd.

All Rights Reserved.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

4

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this
equipment:

• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.

• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v2.00 10/08/2018 First release

5

CONTENTS

1. Introduction ...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................7

5. Features ..................................................7

6. Operation Controls and Functions .......8

6.1 Front Panel ................................................... 8

6.2 Rear Panel ..................................................... 9

6.4 OSD Menu .................................................. 11

6.5 IR Cable Pin Assignment .......................16

6.6 RS-232 Protocol ........................................ 16

6.7 RS-232 and Telnet Commands ............ 17

6.8 Telnet Control ............................................26

6.9 WebGUI Control .......................................28

7. Connection Diagram .......................... 30

8. Specifications ...................................... 31

8.1 Technical Specifications ........................31

8.2 Video Specifications................................32

8.3 HDBaseT Specifications .........................34

9. Acronyms ............................................. 35

6

1. INTRODUCTION

This HDMI/DP/HDBaseT to HDMI/HDBaseT Scaler supports five inputs
including HDMI, VGA, and DisplayPort. Any selected source will be scaled
to your preferred resolution for output over HDMI and HDBaseT. HD
resolutions up to 1080p@60Hz are supported. This unit also provides
audio application flexibility by including multiple unbalanced audio
inputs, a 1/4” mic input (with support for optional 48V phantom power)
and one line out port.

This unit contains an audio DSP engine with auto-mixer and auto-gain
functionality, allowing for the mic source to be mixed with the audio from
one of the video sources while reducing the background audio in order to
enhance the primary audio source. The HDBaseT output provides 24V PoC
(Power over Cable) allowing compatible PoC powered HDBaseT Receivers
to operate without needing a local power connection. This unit can be
easily controlled and configured through the front panel with OSD, IR
remote control, RS-232, Telnet, or WebGUI. This unit is an ideal solution for
presentations in classrooms and conference rooms.

2. APPLICATIONS



Analogue and digital source integration



Upscaling standard definition video for high-definition displays



Conference centers



Lecture halls



Schools and universities

3. PACKAGE CONTENTS



1×HDMI/DP/VGA to HDMI/HDBaseT Scaler



1×Remote Control (CR-165)



1×IR Blaster Cable



1×IR Extender Cable



1×19″ Rack Mounting Kit



1×15-pin D-sub Male to 3 RCA Cable



1×3.5mm to 9-pin D-sub Male Cable



1×6-pin Terminal Block



1×24V/1.25A Power Adaptor

7



1×Operation Manual

4. SYSTEM REQUIREMENTS



Source equipment such as media players, video game consoles, PCs,

or set-top boxes.



HDMI receiving equipment such as HDTVs, monitors or audio

amplifiers and/or a compatible HDBaseT Receiver with 24V PoC
support.



The use of industry standard Cat.6, Cat.6a or Cat.7 cable is highly

recommended.



The use of “Premium High Speed HDMI” cables is highly

recommended.

5. FEATURES



HDMI, DVI and DisplayPort compliant



HDCP 1.4 compliant



Multiple video and audio inputs: 2×HDMI, 2×VGA,1×DisplayPort,

3×Unbalanced audio, 1×Mic audio (w/ 48V phantom power option)



HDMI and HDBaseT outputs (mirrored)



Inputs support HD resolutions up to 1080p@60Hz and PC resolutions

from VGA to WUXGA



Outputs support resolutions up to 1080p@60Hz



Supports pass-through of LPCM 2.0 audio



Audio DSP with auto mixer and gain control for mixing audio and

reducing background audio



HDBaseT feature support: High-Definition video and audio, 24V

PoC (Power over Cable) and control (Bi-directional IR & RS-232 pass
through)



HDBaseT output provides 24V PoC to power to compatible HDBaseT

Receivers



EDID management support



Supports IR In and IR Out to receive or transmit IR signals from

compatible Receivers with bi-directional IR



Remote control provides discrete input source selection



Supports control via WebGUI, Telnet, IR remote and RS-232

8

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

LOCK

+

-

ENTER

MENU

SELECT

HDMI

1

DPHDMI

2

1PC2

PC LOCK

81

2

3 4 5 6 7

1

POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

2

IR WINDOW: Accepts IR signals from the included IR remote for

control of this unit only.

3

ENTER: Press to confirm a selection within the OSD or to go deeper

into a menu item.

4

MENU: Press to enter the OSD menu, or to back out from menu items.

5

-/+ (MINUS/PLUS): Press to move up and down or adjust selections

within OSD menus.

Note: Pressing “Menu” and “+” together will reset the output resolution

to XGA@60Hz (1024×768). Pressing “Menu” and “-” together will reset the
output resolution to 720p@60Hz.

6

SELECT: Press this button to sequentially switch through the available

inputs.

7

LOCK: Press to lock all button functions on the front panel. Press again

to release the lock function. The "LOCK" LED will be lit when the front
panel is in the locked state.

8

LEDs: These LEDs indicate the currently selected source as well as the

current front panel lock state.

9

6.2 Rear Panel

PC 2PC 1LINE INMIC INSERVICEIR OUT IR IN RS232

COM PORT

LINE OUT

CAT5e/6/7 OUTHDMI OUTHDMI 2HDMI 1 DISPLAY PORT

INPUT CONTROL

C12345

CONTROL

OFF

ON

PHANTOM

PC 2PC 1

DC 24V

13

15

1

2

3 4 5 6 7 8 9 10 11 12 14

1

HDMI IN 1~2: Connect to HDMI source equipment such as a media

players, game consoles or set-top boxes.

DisplayPort IN: Connect to DisplayPort source equipment such as a

PC or laptop.

PC IN 1~2: Connect to VGA source equipment such as a PC or laptop.

YUV sources, such as DVD players, are also supported with the use of
a 15-pin to 3-RCA adapter when the port has the "COMP IN" mode
turned on in the OSD.

2

HDMI OUT: Connect to an HDMI TV, monitor or amplifier for digital

video and audio output.

CAT5e/6/7 OUT: Connect to a compatible, 24V PoC supporting,

HDBaseT Receiver for remote video and audio output.

3

SERVICE: This slot is reserved for firmware update use only.

4

LINE OUT: Connect to powered speakers or an amplifier for stereo

analogue audio output.

5

MIC IN: Connect a microphone for direct audio input. Phantom power

mics are supported.

6

PHANTOM/OFF/ON: Set the switch to “ON” for condenser mics (5V)

or “PHANTOM” for professional 48V phantom power mics. When the
switch is set to “OFF” the MIC input will be muted.

7

LINE IN: Connect to the stereo analogue output of a device such as a

CD player or PC. This audio will be used in place of the HDMI/DP audio
when “external” audio is selected in the OSD menu.

8

PC 1~2: Connect to the stereo analogue output of the device

connected to the associated VGA input port.

10

9

IR OUT: Connect to the provided IR Blaster to transmit IR signals to

devices within direct line-of-sight of the IR Blaster.

10

IR IN: Connect to the provided IR Extender to extend the IR control

range of remotely located devices. Ensure that the remote being used
is within direct line-of-sight of the IR Extender.

11

RS-232: Connect to a PC, laptop or other serial control device for the

extension of RS-232 signals to the connected HDBaseT Receiver.

12

INPUT CONTROL: This terminal block is used for direct source input

selection. Short the ground pin (marked as “C”) with any one of the
following pins to make an individual source selection (Pin 1=HDMI IN 1,
Pin 2=HDMI IN 2, Pin 3= DisplayPort IN, Pin 4=PC 1, and Pin 5= PC 2).

13

COM PORT: Connect directly to a PC, laptop or other serial control

device to send RS-232 commands to control the unit.

14

CONTROL: Connect directly, or through a network switch, to your PC/

laptop to control the unit via Telnet/WebGUI.

15

DC 24V: Plug the 24V DC power adapter into this port and connect it

to an AC wall outlet for power.

6.3 Remote Control

1

HDMI 1~2, DP & PC 1~2: Press any of

these buttons to switch immediately to
the corresponding input.

2

MENU: Access the OSD menu.

3

EXIT: Exit the OSD menu.

4

▲/▼: Navigate up/down within the

OSD menu items.

◄/►

& VOL -/+: Adjust the selected
item’s parameters (+) or (-) within the
OSD menu or adjust output volume.

OK: Confirm your selections within the

OSD menu.

5

AUTO ADJUST: Automatically adjust

and center analogue PC sources.

6

RESET: Return to factory default

settings. (Ethernet settings are not
changed.)

CR-165

HDMI2 DP

MENU

OK

EXIT

PC2PC1

HDMI1

RESETAUTO

ADJUST

+

VOL

-

1

3

2

4

6

5

11

6.4 OSD Menu

LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4

DISPLAY SOURCE HDMI1

HDMI2

DP

PC1

PC2

SIZE OVER SCAN

FULL

FOLLOW INPUT

PAN SCAN

LETTER BOX

UNDER 2

UNDER 1

RESOLUTION 640×480

800×600

1024×768

1280×768

1360×768

1280×720

1280×800

1280×1024

1440×900

1400×1050

1680×1050

1600×1200

1920×1080

1920×1200

720×480P

1280×720P60