CYP AU-11CA Operation Manual

OPERATION MANUAL

AU-11CA

HDMI Audio Embedder with

built in Repeater

AU-11CA_Manual-EN.indd 1 20/04/2011 14:12:53

Table of Contents

1. Introduction 1

2. Features 1

3. Package Contents 1

4. Operation Controls and Functions 2

4.1 Top Panel Diagram 2

4.2 Right Panel Diagram 2-3

4.3 Left Panel Diagram 3

4.4 Upper Panel Diagram 3-4

4.5 Rear Panel Diagram 4

5. Connection Diagram 4

6. Specications 5

AU-11CA_Manual-EN.indd 2 20/04/2011 14:13:07

Page 1

1. Introduction

The AU-11CA Audio Embedder lets you insert an external audio signal into any HDMI

source. The device allows you to insert analogue or digital stereo and multi-channel

digital surround sound signals (via Optical) to give users the capability to overcome

audio issues within complex HDMI installation. The AU-11CA also repeats the HDMI

signal to allow an extended total HDMI cable range.

2. Features

• Compliant with HDMI v1.3 , HDCP 1.2 and DVI 1.0

• Supports Optical Sample Rate up to 48 kHz.

• Supports LPCM Stereo, DTS and Dolby Digital via Optical input.

• Supports up to 24bit resolution digital audio.

• HDMI cable distance testing showed that with 1080p 8bit/12bit resolution, the

input/output distance is up to 10 meters.

• Low power consumption.

• Supports HDMI Sample Rates up to 192 kHz

• Simple switched operation

3. Package Contents

• HDMI to CAT6 Transmitter.

• 5V / 1A Power Adaptor

• Operation Manual.

AU-11CA_Manual-EN.indd 1 20/04/2011 14:13:21