Cyclone Manufacturing 5022 User Manual
Page 1/10
Safety Data Sheet
according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), and
OSHA GHS
Printing date 23.10.2014 Revision: 23.10.2014
SECTION 1: Identification of the substance/mixture and of the company/
undertaking
·
1.1 Product identifier
·
Trade name: BTUS; BTUS-ST; BTUS-RC; BTUS – HT; BTUS-CAL Brown Fused Aluminum Oxide
·
Registration number
·
1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.
·
Application of the substance / the mixture
·
1.3 Details of the supplier of the Safety Data Sheet
·
Manufacturer/Supplier:
U.S. Electrofused Minerals, Inc.
600 Steel Street
Aliquippa, PA 15001
Phone: (800) 927-8823
·
1.4 Emergency telephone number:
ChemTel Inc.
(800)255-3924, +1 (813)248-0585
01-2119529248-35-0141
Industrial uses.
SECTION 2: Hazards identification
·
2.1 Classification of the substance or mixture
·
Classification according to Regulation (EC) No 1272/2008
The following Hazard Statements are applicable only according to OSHA regulations within the United
States. These Statements are not applicable for the CLP regulation (1272/2008/EC) in the EU: H351.
health hazard
Carc. 2 H351 Suspected of causing cancer.
·
Classification according to Directive 67/548/EEC or Directive 1999/45/EC
·
Information concerning particular hazards for human and environment:
The product does not have to be labelled due to the calculation procedure of the "General Classification
guideline for preparations of the EU" in the latest valid version.
·
Classification system:
The classification is according to the latest editions of the EU-lists, and extended by company and
literature data.
The classification is in accordance with the latest editions of international substances lists, and is
supplemented by information from technical literature and by information provided by the company.
·
2.2 Label elements
·
Labelling according to Regulation (EC) No 1272/2008
The substance is classified and labelled according to the Globally Harmonized System within the United
States (GHS).
This product does not have a classification according to the CLP regulation.
The product is classified and labelled according to the CLP regulation.
Not applicable.
(Contd. on page 2)
39.4.1
Page 2/10
Safety Data Sheet
according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), and
OSHA GHS
Printing date 23.10.2014 Revision: 23.10.2014
Trade name: BTUS; BTUS-ST; BTUS-RC; BTUS – HT; BTUS-CAL Brown Fused Aluminum Oxide
(Contd. of page 1)
·
Hazard pictograms
Not applicable within the EU; applicable only for North America.
GHS08
·
Signal word
Not applicable within the EU; applicable only for North America.
Warning
·
Hazard-determining components of labelling:
titanium dioxide
·
Hazard statements
The following Hazard Statements are applicable only according to OSHA regulations within the United
States. These Statements are not applicable for the CLP regulation (1272/2008/EC) in the EU: H351.
H351 Suspected of causing cancer.
·
Precautionary statements
Applicable only within the United States (USA)
P281 Use personal protective equipment as required.
P202 Do not handle until all safety precautions have been read and understood.
P308+P313 IF exposed or concerned: Get medical advice/attention.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
·
Hazard description:
·
WHMIS-symbols:
·
NFPA ratings (scale 0 - 4)
Health = 0
000
Fire = 0
Reactivity = 0
Not hazardous under WHMIS.
·
HMIS-ratings (scale 0 - 4)
HEALTH
FIRE
REACTIVITY
·
HMIS Long Term Health Hazard Substances
*0
Health = *0
0
Fire = 0
0
Reactivity = 0
13463-67-7 titanium dioxide
·
2.3 Other hazards
·
Results of PBT and vPvB assessment
·
PBT:
Not applicable.
·
vPvB:
39.4.1
Not applicable.
(Contd. on page 3)
Page 3/10
Safety Data Sheet
according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), and
OSHA GHS
Printing date 23.10.2014 Revision: 23.10.2014
Trade name: BTUS; BTUS-ST; BTUS-RC; BTUS – HT; BTUS-CAL Brown Fused Aluminum Oxide
(Contd. of page 2)
SECTION 3: Composition/information on ingredients
·
3.2 Mixtures
·
Description:
·
Dangerous components:
CAS: 1344-28-1
EINECS: 215-691-6
CAS: 13463-67-7
EINECS: 236-675-5
·
Additional information:
SECTION 4: First aid measures
Mixture of substances listed below with nonhazardous additions.
aluminium oxide
substance with a Community workplace exposure limit
titanium dioxide (classification relevant for USA/Canada only)
Carc. 2, H351
For the wording of the listed risk phrases refer to section 16.
50-100%
2,5-10%
·
4.1 Description of first aid measures
·
General information:
·
After inhalation:
No special measures required.
Supply fresh air; consult doctor in case of complaints.
Provide oxygen treatment if affected person has difficulty breathing.
·
After skin contact:
Brush off loose particles from skin.
Clean with water and soap.
If skin irritation continues, consult a doctor.
·
After eye contact:
Immediately remove contact lenses if possible.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
·
After swallowing:
Rinse out mouth and then drink plenty of water.
Do not induce vomiting; call for medical help immediately.
·
4.2 Most important symptoms and effects, both acute and delayed
Coughing
Breathing difficulty
Gastric or intestinal disorders.
·
Hazards
·
4.3 Indication of any immediate medical attention and special treatment needed
Danger of impaired breathing.
No further relevant information available.
SECTION 5: Firefighting measures
·
5.1 Extinguishing media
·
Suitable extinguishing agents:
·
For safety reasons unsuitable extinguishing agents:
·
5.2 Special hazards arising from the substance or mixture
·
5.3 Advice for firefighters
·
Protective equipment:
Use fire extinguishing methods suitable to surrounding conditions.
None.
No further relevant information available.
Wear self-contained respiratory protective device.
(Contd. on page 4)
39.4.1
Loading...