Cycliq FLY12 User Manual
Fly12 User Guide
Index
Contents
Previous
Next
CONTENTS
1
Getting Started 3
1.1
Identifying parts 3
1.2
Before using your Fly12 3
1.3
Default Settings 3
1.4
Charging the battery 4
1.5
Inserting the MicroSD card 4
1.6
Removing the MicroSD card 4
1.7
Power on/off 4
1.8
Other uses of the power button 5
1.9
WiFi on/off 5
1.10
Other uses of the WiFi button 5
1.11
Mounting Fly12 with the supplied universal mount 5
1.12
Visual and audible alerts 6
1.13
Video modes 7
1.14
Light modes 7
1.15
Idle mode 7
1.16
Incident protection 7
1.17
Master reset 8
2
Adjust settings manually 8
2.1
Edit settings on your Fly12 manually
(via cong.txt le) 8
2.2
Time and date stamp setting (via cong.txt le) 9
2.3
Formatting the MicroSD card (via cong.txt le) 9
2.4
Reset the WiFi password (via cong.txt le) 9
2.5
Race Mode (via cong.txt le) 10
2.6
Idle Mode (via cong.txt le) 10
2.7
Alert volume settings (via cong.txt le) 11
2.8
Set the recording alert level (via cong.txt le) 11
3
TroubleShooting 12
4
Regulatory Information 13
4.1
FCC compliance statement 13
4.2
IC compliance statement 13
4.3
Limited warranty 13
4.4
Cycliq customer support 13
4.5
Caution 13
5
Index 14
JOIN THE CYCLIQ
COMMUNITY
Share your videos with the Cycliq community by uploading
them to www.cycliq.com/videos where approved videos are
automatically entered into regular prize draws.
Follow us on social media
@Cycliq /Cycliq /Cycliq
2 of 15
GETTING STARTED
C
Index
Contents
Previous
Next
1
GETTING STARTED
1.1
Identifying parts
Hd CAmeRA
A
B
400 LumenS
1.2
Before using your Fly12
Fly12 comes with a pre-charged battery, however Cycliq
recommends connecting the device to a PC/Mac and ensuring
the green charge light is displayed before using your device.
d
F
A. HD Camera
B. 400 Lumen Light
C. Mounting Bracket
D. MicroSD Slot
E. Micro USB Port
F. WiFi/Capture Button
G. Speaker
H. Microphone
I. Power/Light Button
e
1.3
G
H
I
Default Settings
Out of the box your Fly12 powers up with the
following settings.
Video Resolution 1280x720p @30fps
Light Modes
Bluetooth Discoverable
WiFi Off
(Solid, Flash, Pulse,Studio)
High / Medium / Low
Getting Started — 3 of 15
GETTING STARTED
Index
Contents
Previous
Next
1.4
Charging the battery
Fly12 can be charged in any of the following ways:
A
B
C
A. Via your Computer’s USB port
B. Universal USB AC Adapter (not included)
C. Universal USB auto charger (not included)
1.6
Removing the MicroSD card
To remove the MicroSD card, open the MiscroSD slot and
gentle depress the MicroSD card. This will free the card
allowing for the card to be removed.
1.7
TIP
Cycliq recommends charging via a universal AC adapter for faster
charge rate.
1.5
Inserting the MicroSD card
To insert the MicroSD card, open the MicroSD slot and gently
insert the MicroSD card as shown below
Power on/of f
To power on:
Press the power button for 1 second and release. The unit
will make a startup chime followed by a series of beeps which
indicate charge level.
TIP
When the device is powered on Fly12will always begin recording.
To power off:
Press the power button for 1 second and release. The
unit will make a series of beeps which indicate charge level
followed by a shutdown chime.
TIP
Visual/audible alerts are an indicative guide to Fly12 charge levels.
See "Visual and audible alerts" on page 6 for more details.
Getting Started — 4 of 15
GETTING STARTED
Hd CAmeRA
400 LumenS
Hd CAmeRA
400 LumenS
HAndLeBAR
Index
Contents
Previous
Next
1.8
Other uses of the power button
Light:
Press the power button to cycle through the light modes.
1.9
WiFi on/of f
To power on WiFi:
Press the WiFi button for 1 second and release.
To power off:
Press the WiFi button for 1 second and release.
1.11
Mounting Fly12 with the supplied universal mount
Fly12 can be mounted either above or below your handlebars.
To use the universal mount (supplied with your Fly12) follow
these simple steps.
1. Attach the universal mount at the desired location and
fasten the mount using the 2 xing screws.
HAndLeBAR
TIP
The WiFi button should be activated when using the Review/Edit
function of the CycliqPlus app.
1.10
Other uses of the WiFi button
Capture/Incident protection:
If you witness an event that you want to capture and retain
when riding, simply press the WiFi button briey. This will
lock the current and previous le and prevent overwriting.
2. Slide your Fly12 mounting bracket into the adjoining
mount and fasten the Fly12 Quick Bolt.
Hd CAmeRA
400 LumenS
HAndLeBAR
Hd CAmeRA
400 LumenS
TIP
Other mounting options available at www.cycliq.com
Getting Started — 5 of 15
Loading...