Cycle Torch GT 800 User Manual

User Manual EN

GT 800

1

III.

If for any reason you are not satisfied, please contact us as soon as
possible at: [e-mail] , so that we can work with you to
solve whatever issues!

Thank you for purchasing one of our products !!!

We are truly honored to be able to serve you and provide you with the best

Experience possible. If you’ve enjoyed our product, we would sincerely appreciate

your honest feedback.

To insure maximum experience and safety, familiarize yourself with ALL

aspects of your new light and battery system:

I. Safety Precaution .......................................................................................... 3

II. How to mount GT 800 .................................................................................. 3

III. How to charge GT 800 ................................................................................... 4

IV. Switching the lighting modes ........................................................................ 5

V. Model Specifications...................................................................................... 7

VI. Rechargeable Tail Bolt .................................................................................. 7

VII. Warranty, Support and Customer Service .................................................... 8

2

I. Safety Precaution

III.

1. Never look directly into bike light.

2. Avoid directing the light beam into the eyes of another person.

3. Do not place it within children’s reach.

4. Before your trip, please make sure that the light is firmly mounted to the
handlebar, it lights up, and the light is not blocked by baggage.

5. This product is waterproof under normal daily use and can be used in the
rain. However, do not intentionally submerge it in water.

Failure to follow these cations may expose you to risks, can cause

damage to the light system and will void the warranty !

A lighting system can make riding safer and you more visible, but lights are no
substitute for common sense. Ride within your capability with consideration for the
riding environment.

This product contains components that must be recycled per EU Directive
2002/96/EC and may not be disposed as unsorted municipal waste!

ll. How to mount GT 800 to a Bicycle:

GT 800 comes with mounts for both handlebar and helmet. There is rubber
band to accommodate various sizes of handlebars. When mounting the battery,
locate a place that will keep it and the wires protected from kinking or being
pinched in the event of a crash or in any other situation.

The light system is designed to be mounted on a handlebar or on the enclosed
helmet or head mount. Both mounts will use one of the rubber rings. The battery
may also be mounted using the attached Velcro strap. When mounting the battery,
insure adequate length of cable between the battery and cable so that full freedom
of movement of the mount and does not pull on the battery, light or their
connection or cause the wire to become pinched or stressed. When mounting the
light, run the wire first over then handlebar and provide and extra half wrap of

3