UM-CV-N1417-Q411V2 www.austin-hughes.com
User Manual
Designed and manufactured by Austin Hughes
dedicated KVM switch and rackmount screen technology
N-1417 / N-1419
1U 17” / 19” LCD Console Drawer
Short Depth version
Options :
- AV / DVI-D / Audio
- DC power
UM-CV-N1417-Q411V2 www.austin-hughes.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing dam
age to other equipment or injury to persons nearby.
■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■ Observe all precautions and warnings attached to the equipment.
■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being dam
aged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fi re or electrical shock.
■ Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equipment and invali
date its warranty.
■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service personnel.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modifi ed or removed.
■ Damage, deterioration or malfunction resulting from:
□ Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi cation, or
failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fl uctuation or failure.
□ Use of supplies or parts not meeting our specifi cations.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifi cations made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
UM-CV-N1417-Q411V2 www.austin-hughes.com
Contents
< Part 1 >
N-1417 N-1419
1.1 Package Contents
1.2 Structure Diagram & Dimension
1.3 Installation
1.4 Connection to External KVM Switch or Server
1.5 On-screen Display Operation ( OSD )
1.6 LCD / Keyboard / Mouse Specifi cation
1.7 Options : DVI-D / BNC + S-Video / Audio
: DC Power
P. 1
P. 2
P.3 - 6
P. 7
P.8
P.9 - 10
P. 11
UM-CV-N1417-Q411V2 www.austin-hughes.com
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
< 1.1 > Package Content
N-1417 / 1419
< Part 1 >
- N-1417 or N-1419 X 1
- CE-6 6ft Combo KVM cable X 1
- Power adapter & Power cord X 1
- M6 screw, cage nut & cup washer X 6
P. 1
+
The above package content is only for the single console models.
It varies with options such as DVI-D, AV, audio & DC power.
UM-CV-N1417-Q411V2 www.austin-hughes.com
P. 2
< 1.2 > Structure Diagram & Dimension
N-1417 / 1419
1
2
3
5
6
Carry handle to release the 2-pt lock
LCD interchangeable module kit
“One Man” Installation Slides
LCD membrane
1
2
3
5
7
6
7
Micro switch for screen auto power off
Keyboard interchangeable module kit
Mouse interchangeable module kit
4
4
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
N-1417 series
441.6 x 480 x 44.3 mm
17.4 x 18.9 x 1.74"
590 x 687 x 120 mm
23.2 x 27 x 4.7"
13 kg
29 lb
20 kg
44 lb
N-1419 series
441.6 x 480 x 44.3 mm
17.4 x 18.9 x 1.74"
590 x 687 x 120 mm
23.2 x 27 x 4.7"
13 kg
29 lb
20 kg
44 lb
The product dimension will change from 480mm to 530mm in depth for the following :
- DVI option
- DC power option
- or change external power to internal power
The weight is only for the single console models. It varies with accessories & options
such as DVI-D, AV, audio & DC power.
UM-CV-N1417-Q411V2 www.austin-hughes.com
Mounting bracket
Black arrow button
P. 3
■ Attach the left and right mounting bracket to rack
19” mounting rails.
■ Adjust the rear mounting bracket to fi t your rack.
■ M6 screw and cup washer x 6 pcs included.
■ Pick up the LCD console drawer.
■ Insert the LCD console drawer into the mounting
bracket.
■ Pull and hold the left & right black arrow buttons on
the rails.
■ Return the LCD console drawer to park position.
Left front
Right front
Left bracket
Right bracket
Front side
Rear side
■ Tighten all 8 pcs of M6 screw to complete the
installation.
■ Attach front left and right mounting ears of the LCD
console drawer to vertical mounting rails.
■ M6 screw and cup washer x 2 pcs included.
Complete the installation
< 1.3 > Installation - How to install One Man Installation Slides
Step
4
Step
1
Step
2
Step
3
Caution : Leave the screws slightly loose,
until you complete the installation
in step
4
UM-CV-N1417-Q411V2 www.austin-hughes.com
P. 4
< 1.3 > Installation- How to install L-bracket
N-1417 / 1419
■ Install left & right rear L-brackets with two fasteners shown
above.
■ Leave the fasteners slightly loose.
■ Measure the depth of the front and rear mounting
rails.
■ Align each rear L-bracket to a suitable length and
tighten the fasteners.
■ Fix the LCD console drawer into the rack.
M6 mounting screws & cage nuts are not provided.
Step
1
Step
2
Step
3
UM-CV-N1417-Q411V2 www.austin-hughes.com
P. 5
Figure 3.
Figure 2.
■ Pull and hold the black arrow button on either side
of the LCD console drawer to unlock.
(shown in Figure 2).
Figure 1.
LL
I
L
I
■ A black arrow release button is located on the
front of each slide. (shown in Figure 1).
■ Push the LCD console drawer into the rack.
(shown in Figure 3).
Caution : Keep your fi ngers away from the slide
stop
< 1.3 > Installation - How to Use the Slides
UM-CV-N1417-Q411V2 www.austin-hughes.com
■ Operate the LCD console drawer.
■ Flip up the LCD to a suitable angle.
P. 6
< 1.3 > Installation- How to use the drawer
N-1417 / 1419
■ Pull the tab on the front handle and gently
slide out the drawer.
UM-CV-N1417-Q411V2 www.austin-hughes.com
P. 7
< 1.4 > Connection to PS/2 or USB Server
PS/2 server USB server
CE-6 Combo
KVM cable
CE-6 Combo
KVM cable
LCD console drawer LCD console drawer
PS/2 console KVM
CE-6 Combo
KVM cable
LCD console drawer LCD console drawer
< 1.4 > Connection to external KVM
CE-6 KVM Cable
KVM
USB console KVM
CE-6 Combo
KVM cable
Power Power
Power Power
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
UM-CV-N1417-Q411V2 www.austin-hughes.com
< 1.5 > On-screen Display Operation ( OSD )
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Display the OSD menu
Power on / off LCD
Power light
Green = On
Orange = Power saving
Membrane Switch Function
OSD Confi guration Page
Image:
for the brightness, contrast, color temp, red, green, and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance, AVL and mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
N-1417 / 1419
P. 8
UM-CV-N1417-Q411V2 www.austin-hughes.com
P. 9
Item Description
LCD Manufacturer
Diagonal Size 17" TFT 19" TFT
Max. Resolution 1280 x 1024 1280 x 1024
Brightness (cd/m²) 250 250
Color Support 16.7 M 16.7 M
Contrast Ratio (typ.) 1000:1 1000:1
Viewing Angle (H/V) 160˚ x 160˚ 160˚ x 160˚
Active Area (mm) 338 x 270 376 x 301
Response Time T r + Tf (ms) 55
LCD Panel MTBF (hrs) 50,000 50,000
VGA Signal Input Analog RGB, 0.7Vp-p
Sync. T ype Separate H/V, Composite, SOG
Resolution
800 x 600, 60/ 70/ 72/ 75 Hz
1024 x 768, 60/ 70/ 75 Hz
1152 x 864, 60/ 70/ 75 Hz
1280 x 720, 60/ 75 Hz
1280 x 1024, 60/ 70/ 75 Hz
Plug & Play DDC EDID 1.3
Console Port (Combo)
DB-15 connector for VGA / keyboard / mouse
(Combo interface)
Power Input Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption Max. 48 Watt, Standby 5 Watt
Compatibility Multi-platform - Mix PCs, SUNs, IBMs, HPs & DELLs.
Regulation Approval FCC, CE
Environmental
Operation 0˚ to 50˚C Degree
Storage -5˚ to 60 ˚C Degree
Relative Humidity 5~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random vibration
< 1.6 > LCD / Keyboard / Mouse Specifi cation
UM-CV-N1417-Q411V2 www.austin-hughes.com
P.10
< 1.6 > LCD / Keyboard / Mouse Specifi cation
Supporting layouts
America
United States
EMEA
United Kingdom Germany France Spain Norway
Italy Russia Switzerland Netherlands Portugal
Asia
China Japan Korea Arabia Turkey
Key force 55 ± 5g
Travelling distance 3 ± 0.3mm
Switch life > 10 million life cycle time
Software support MS Windows 7 / 2008 / 2003 / 2000 / XP / ME / 98 / DOC
Linux / Mac
N keyboard integrated with trackball
Nb
N keyboard integrated with touchpad
Ne
UM-CV-N1417-Q411V2 www.austin-hughes.com
■ Option excludes 1 x power cord
■ Option includes 1 x 6ft DVI-D cable
■ Option includes 1 x 6ft S-Video cable
Power
S-Video
BNC
KVM
Right
< 1.7 > Options : DVI-D / BNC + S-Video / Audio / DC power
P. 11
DVI-D Option
BNC + S-Video Option
■ Audio input is 35mm audio plug
■ The speaker is sharing the same power with LCD.
Speaker
Audio Option
DC Power Option
Model 12V 24V 48V
Input rating
Input voltage: 12-Volt 24-Volt 48-Volt
Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V
Input current
- No load 50 mA 50 mA 50 mA
- Full load 4950 mA 2450 mA 1220 mA
Output rating
Output voltage: 12-Volt 12-Volt 12-Volt
Output current: 4.16A 4.16A 4.16A
Effi ciency 84% 85% 85%
Left
DC Power
KVM
The product dimension will change from 480mm to 530mm in depth for DC power option
The product dimension will change from 480mm to 530mm in depth for DVI-D option
N-1417 / 1419
DVI-D
KVMPower
Audio
KVMPower
UM-CV-N1417-Q411V2 www.austin-hughes.com
The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility
for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2011 Austin Hughes Electronics Ltd. All rights reserved.
Loading...