CyberView DX117 User Manual

UM-CV-751-DX117-Q116V1 www.austin-hughes.com
751
Designed and manufactured by Austin Hughes
1U Dual Slide LCD Console Drawer
DX117
Options :
- SDI
- AV / HDMI / Audio
17” Ultra High Resolution LCD 1920 x 1200
User Manual
dedicated KVM switch and rackmount screen technology
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
Legal Information
First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.
Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fi re or electrical shock.
Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service personnel.
What the warranty does not cover
Any product, on which the serial number has been defaced, modi ed or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi cation, or
failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us. Any damage of the product due to shipment. Removal or installation of the product. Causes external to the product, such as electric power fl uctuation or failure. Use of supplies or parts not meeting our specifi cations. Normal wear and tear. Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifi cations made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Re-position or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
< Part. 3 >
Options
3.1 3G / HD / SD-SDI Broadcast-grade input
3.2 HDMI, S-Video + BNC & Audio
3.3 DC Power : 12V / 24V / 48V / 110 ~ 125V
P.15 P.16 P.17
< Part. 2 >
Specifi cations / OSD
2.1 Product Specifi cations
2.2 Keyboard / Mouse Specifi cations
2.3 On-screen Display Operation ( OSD )
P.8 - 9 P.10 - 12 P.13 - 14
< Part. 1 >
DX117
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Installation
1.4 Connection
Contents
P. 1 P.1 - 2 P.3 - 5 P.6 - 7
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
Matrix DB-15 KVM
Local Remote 8-port 16-port 32-port
111
-MIP813 -MIP1613 -
112
-MIP824 -MIP1624 -
110
-M802 -M1602 -
120
-M803 -M1603 -
1 3 0 -M804 -M1604 -
www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MKVM-KIT.pdf
DVI-D KVM
Local Remote 12-port - -
1 0 0 -1201D - -
www.austin-hughes.com/support/usermanual/cyberview/UM-CV-DVIKVM-KIT.pdf
Combo DB-15 KVM
Local Remote 8-port 16-port 32-port
101
-IP802 -IP1602 -
110
-802 -1602 -
1 0 0 -S801 -S1601 -
www.austin-hughes.com/support/usermanual/cyberview/UM-CV-SKVM-KIT.pdf
< Part. 4 >
KVM Integration
Contents
PS/2 DB-15 KVM
Local Remote 8-port - -
1 0 0 -801 - -
www.austin-hughes.com/support/usermanual/cyberview/UM-CV-PS2KVM-KIT.pdf
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
It is very important to mount the equipment in a suitable cabinet or on a stable surface.
Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
Use only cleansers made specifi cally for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the fi nish.
Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microfi ber cloth. Use as little pressure as possible.
1 2
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microfi ber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
1 2
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfi ber cloth fi rst, not directly on the parts you are cleaning.
3 4
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
5
Carry handle to release the 2-pt lock
LCD interchangeable module kit
Installation Slides
LCD membrane
Membrane switch (KVM option)
1
2
4
7
8
9
1
2
3
6
7
8
Audio speaker ( for HDMI or Audio option )
Keyboard interchangeable module kit
Touchpad mouse module
1U dual slide for LCD console drawer
4
3
6
9
5
5
DX117 unit X 1
- CX-6 6ft DVI-D console cable X 1
( Alternative : CB-6 6ft VGA console cable )
- Power cord X 1
- M6 screw, cage nut & cup washer X 8
The above package content is only for the single console models. It varies with options such as KVM, SDI, HDMI, AV, Audio & DC power.
< 1.1 > Package Content
P. 1
< Part 1 >
< 1.2 > Structure Diagram
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
Side View
Top View
DX117
Front View
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
DX117 series
441.6 x 650 x 44 mm
17.4 x 25.6 x 1.73"
595 x 860 x 140 mm
23.4 x 33.9 x 5.5”
12 kg
26.4 lb
18 kg
39.6 lb
The weight is only for the single console models. It varies with accessories & options such as KVM, SDI, HDMI, AV, audio & DC power.
< 1.2 > Dimension
P. 2
UNIT : mm
1mm = 0.03937 inch
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
Fix the LCD console drawer into the rack.
Complete the installation
Step
3
Insert the left and right rear mounting brackets into
the LCD console drawer.
Step
1
< 1.3 > Installation - How to install Installation Slides
P. 3
Step
2
Measure the depth of the front and rear mounting rails.
Align each rear mounting bracket to a suitable length.
M6 screw, cage nut & cup washer x 8 are provided.
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
DX117
Press the handle button and gently slide out
the drawer.
Flip up the LCD to a suitable angle.
Operate the LCD console drawer.
P. 4
< 1.3 > Installation - How to Use the Dual Slides
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
P. 5
< 1.3 > Installation - How to Use the Dual Slides
Flip down the front panel.
Press the handle button and gently push
back the drawer into the rack.
Return the LCD console drawer to park
position.
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
DX117
DVI-D KVM
DVI-D
LCD Console Drawer
USB server
P. 6
< 1.4 > Connection to USB Server via CX-6 cable
< 1.4 > Connection to external KVM via CX-6 cable
DVI console KVM
LCD Console Drawer
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
KVM
CX-6 DVI-D console cable
Power
Power
DVI-DUSB
CX-6 DVI-D console cable
DVI-D USB
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
USB server
P. 7
KVM
KVM
LCD Console Drawer
< 1.4 > Connection to USB Server via CB-6 cable
< 1.4 > Connection to external KVM via CB-6 cable
LCD Console Drawer
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
CB-6 VGA console cable
Power
Power
USB console KVM
VGAUSB
USB VGA
CB-6 VGA console cable
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
Power Power Supply Range Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption for Single Console
Screen ON Max. 34W
Power saving mode Max. 4W
Power button OFF Max. 1W
Power Consumption with KVM integration
Screen ON Max. 59W
Power saving mode Max. 29W
*For details, please refer to our KVM rear kit user manuals
DX117
Video Connectivity
Digital HDMI HDMI 1.1, CEA-861-D
DVI DVI-D, TMDS single link
Analog
VGA Analog 0.7Vp-p
Composite ( BNC ) NTSC & PAL
S-Video ( 4-pin ) NTSC & PAL
Plug & Play DVI / VGA VESA EDID structure 1.3
Synchronization VGA Separate, Composite & SOG
Audio Connectivity
Audio Input Connector 3.5mm stereo jack
Impedance / Power level 30kΩ / 750mV
Audio Output
Connector 3.5mm stereo jack
Resistance / Power level 30kΩ / 2.8V
Speaker Dual Stereo Speaker 2W x 2
*When the audio output is connected, speaker output is OFF
LCD Panel
Panel Size ( diagonal ) 17.1-inch Widescreen TFT color LCD
Display pixel ( dots x lines ) 1920 x 1200
Brightness ( typ. ) 210
Contrast Ratio ( typ. ) 600:1
Color 16.7 M, 8-bit
Viewing Angle ( L/R/U/D ) 65/65/55/55
Response Time ( ms ) 30
Dot pitch ( mm ) 0.191
Display Area ( mm ) 367.20H x 229.50V
Surface treatment Anti-glare, Hard-coating
Surface hardness 3H
Backlight Type LED
MTBF ( hrs ) 20,000
< 2.1 > Product Specifi cations
< Part 2 >
P. 8
Regulatory Safety FCC & CE certifi ed
Environmental RoHS2 & REACH compliant
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
Environmental Conditions
Operating Temperature 0 to 55°C degree
Humidity 20~90%, non-condensing
Altitude 16,000 ft
Storage / Non-operating
Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random
Physical Specifi cation
Product ( W x D x H )
441.6 x 650 x 44 mm
17.4 x 25.6 x 1.73 inch
Packing ( W x D x H )
595 x 860 x 140 mm
23.4 x 33.9 x 5.5 inch
Net Weight 12 kgs / 26.4 lbs
Gross Weight 18 kgs / 39.6 lbs
Applicable Format
DVI-D / VGA Input PC Signal 1920 x 1200 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
P. 9
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
Key force 55 ± 5g Travelling distance 3 ± 0.3mm Switch life > 10 million life cycle time OS support Windows / Linux / Unix / Mac OS
DX117
< 2.2 > Keyboard / Mouse Specifi cations
G keyboard integrated with touchpad
P.10
Supporting layouts
America
United States
EMEA
United Kingdom Germany France Spain Norway
Italy Russia Switzerland Netherlands Portugal
Asia
China Japan Korea Arabia Turkey
Ge
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
< 2.2 > MAC Keyboard / Mouse Options
F8F7 F8F7
MAC keyboard integrated with touchpad
Me
P. 11
How to Use "MAC" Keyboard
Keyboard Features
F1
Decrease display brightness
F9
Fast-forward
F2
Increase display brightness
F10
Mute sound
F3
Mission control * Only works with OS X Lion default Keyboard Shortcuts.
F11
Decrease volume
F4
Dashboard
F12
Increase volume
F7
Rewind
Eject disc
F8
Play / Pause
Command
Supporting layouts
America
United States
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
DX117
Audio / Display Keys * Please ask your supplier for full details
F9
Audio : Mute Display : Degauss
F11
Audio : Decrease volume Display : Decrease contrast
F12
Audio : Increase volume Display : Increase contrast
< 2.2 > SUN Keyboard / Mouse Options
Num LED in Green mode
Key pad behaves as a normal key pad mode
Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
104 key notepad keyboard with full numerical pad and SUN function
USB interface
US layout only
S keyboard integrated with touchpad / trackball
Num LED in Off mode
Key pad behaves as a SUN Solar system administration command mode
How to Use "S" Keyboard
Num Caps Scroll Comp ose
S keyboard integrated with touchpad
Se
P.12
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
PC
Auto adjust : Automatically adjust sizes, centers and fi ne tunes the
video signal to eliminate waviness and distortion.
Clock : Adjust the clock value
Phase : Adjust the phase value
H. Position : Align the screen image left or right
V. Position : Align the screen image up or down
2
P.13
< 2.3 > On-screen Display Operation ( OSD )
Exit the OSD screen Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control (To auto adjustment by pressing the button for 5 seconds)
Display the OSD menu
Power on / off LCD
Power light Green = On Orange = Power saving
Membrane Switch Function
Picture
Picture mode : Standard / Vivid / Soft / User mode to choose
Brightness : Adjust background black level of the screen image
Contrast : Adjust the difference between the image background
(black level) and the foreground (white level)
Hue: Adjust the screen hue value
Saturation : Adjust the saturation of the image color
Picture size : Adjust the image size
Color temp : Standard / Cool / Warm / User to choose
Noise reduce : Reduce the noise of the image
Sharpness :
Adjust the image from weak to sharp
1
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
< 2.3 > On-screen Display Operation ( OSD )
DX117
MISC
Language : Select the language in which the OSD menu is
displayed - English
Sleep timer : Set the off time
PIP mode :
Adjust picture in picture setting
PIP position : Enter into PIP position
PIP source : Enter into the Sub source and sound source
System reset : Return the adjustment back to factory setting
Information : Select for Help
4
Audio
Audio mode : Movie / Voice / Normal / Music mode to choose
Volume : Adjust the volume of sound
Bass :
Set the value of bass sound
Treble : Set the value of treble sound
Balance : Set the balance value of treble and bass sound
Analog TV audio : Set the value of analog TV audio sound
Mute : Turn off the surrounding sound
3
P.14
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
SDI
in - out
Power
KVM
DVI-DHDMI
Audio
in - in - out
S-Video BNC
PC Video
Austin Hughes’ SDI input is an ideal solution for the broadcast­grade video and high resolution CCTV market.
Designed for use with CyberView Full HD 1080p and ultra high resolution 1920 x 1200 LCD displays, Austin Hughes provides a SDI input module without using additional space or power and it comes standard with a 2-year warranty.
< 3.1 > Options : 3G / HD / SD-SDI input
P.15
INPUT 3G-SDI IN BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT BNC x 1 / Active through, equalized & relocked
Standard Compliance Video SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio SMPTE 299M / 272M-C
Compatible Audio Format 3G-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /
Asynchronized Video
Compatible Video Format 3G-SDI 1080p
1080p 1080i 720p
@60 / 50Hz, 4:2:2 @30 / 25 / 24Hz, 4:4:4 @60 / 50Hz, 4:4:4 @60 / 50Hz, 4:4:4
HD-SDI 1080p
1080i 720p
@30 / 25 / 24Hz, 4:2:2 @60 / 50Hz, 4:2:2 @60 / 50Hz, 4:2:2
SD-SDI 480i @60Hz, 4:2:2
ITU-R BT.656 576i @50Hz, 4:2:2
Max. Transmission Distance 75 ohm coaxial cable
3G-SDI 150m at 2.97Gb/s
HD-SDI 250m at 1.485Gb/s
SD-SDI 480m at 270Mb/s
< Part 3 >
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
( 1 ) In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card setting on display size to fi x the issue.
( 2 ) For dual slide 1U / 2U LCD console drawer, the user can only select one of the above four options.
( Built-in Dual Stereo Speakers, 2W x 2 ) ( 3.5mm audio jacks for audio in & out )
( HDMI 1.1, CEA-861-D )
Audio
Power
KVM
DVI-DHDMI
S-Video BNC
in - in - out
PC Video
- A V
- Audio
( S-Video + Composite, BNC )
< 3.2 > Options :
- HDMI
DX117
P.16
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
Option excludes 1 x power cord and 1 x AC power adapter
***
DC power
< 3.3 > Options : DC Power
P.17
KVM
DVI-D
Model 12V 24V 48V 110 ~ 125V
Input rating
Input voltage: 12-Volt 24-Volt 48-Volt 110-Volt
Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V 66 ~ 160V
Input current
- No load 50 mA 50 mA 50 mA 40 mA
- Full load 4950 mA 2450 mA 1220 mA 993 mA
Output rating
Output voltage: 12-Volt 12-Volt 12-Volt 12-Volt
Output current: 4.16A 4.16A 4.16A 8.4A
Ef ciency 84% 85% 85% 92%
UM-CV-751-DX117-Q116V1 www.austin-hughes.com
The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2016 Austin Hughes Electronics Ltd. All rights reserved.
Loading...