Cybertree CPF190NXT9000P User Manual

CPL-190N USER MANUAL DRAFT

1. Controls

⊙ – Function button
▣ – Read/Select button

Function button – In Stand-by mode, press the function button for 2 seconds to display

Function Selections, this will show you the different functions available.
Read button –pressing the Read button will display an incoming message.

2. Changing the Battery
This device uses one “AAA” battery.

1) Slide the battery cover out in the direction of the arrow (←)

2) Replace the battery, paying attention to the polarity.

Caution:
Always “Power off” the pager before replacing the battery; this will prevent loss of

information.

3. Icons

Set up Icons

: Alert sound mode

: Vibration mode

: Melody mode

: Alarm clock set mode

: Reminder call alert mode

Message Status Icons

: Message total number indicator

: Message lock indicator

: Continuing message indicator

: Duplicate message indicator

Other icons

: Low battery indicator

: Signal indicator

: Delete messages indicator

: Memory full indicator

4. Receiving and reading Messages

When a message is received the information is displayed on the screen.

Checking a message: The icon on the upper left of the screen displays the total

number of messages received.

To check your messages, press ▣ (read button).

1) “NO INFO” will display on the screen when there are no messages.

2) If a page is received, “1 PAGE” will display on the screen.

3) Once messages have been read, you can press ▣ (read button) repeatedly to display

the following screens:

st

1

Screen- This displays the receiving time, month, and day. Eg) “12:30A 2-

10”

nd

2

Screen- This displays up to 12 characters of the phone number. If there

are more than 12 characters, this icon will display Eg) “416-453-4864”

rd

3

Screen- If there are more than 12 characters, this screen will show the rest

of the phone number information.

4) If you press the ▣ icon continuously, the following reception message displays.

5) If the memory is full, the icon displays. Then, the oldest message is deleted

when a new message is received and only locked/saved messages will be saved but the

locked message can not be deleted.

REMARK:

If a duplicate message is received, the pager will display icon. The first

message will be deleted and only the new message is displayed.

5. Erase messages

1) In receiving information mode, you can press ⊙ (function button) once to turn the

display light on. Press it a second time and the pager will ask “Erase?” Press it a

third time to go back to display status without erasing the message.

2) To erase the message, press ▣ (read button).

6. Locking and unlocking messages