CyberTAN Technology BU067HS User Manual

YouSong lndustrial District, Longhua

M26H004.01

FCC ID: N89-BU067HS

Town, Baoan, ShenZhen
Tel: [phone]#69085
Fax:[phone]#64886

COMPANY CONFIDENTIAL

!

Product Specification

BT Module

M26H004.01

FCC ID:ʳˡˋˌˀ˕˨˃ˉˊ˛˦

2!

COMPANY CONFIDENTIAL

CONTENTS

0. REVISION HISTORY

1. INTRODUCTION

1.1 SCOPE

1.2 FEATURE

1.3 FUNCTIONAL BLOCK DIAGRAM

2. MECHANICAL SPECIFICATION

2.1 Module demension

2.2 WTB Connector Specification

2.3 WTB connector Pin definition

3. ELECTRICAL SPECIFICATION

3.1 OPERATING CONDITION

3.2 BT RF SPECIFICATION

3.3 ON-BOARD ANTENNA SPECIFICATION

4. QUALITY

5. APPENDIX

5.1 Label Information...............................................................................................................................7

5.2 Package Information .........................................................................................................................8

................................

................................................................

................................................................

................................

................................................................

................................................................

................................

................................................................

................................................................

................................

................................................................

................................................................

...............................................................................4

.............................................................................4

............................................................4

................................

.............................................................

................................................................

...................................................................5

........................................................5

.........................................................5

................................

..............................................................

................................................................

.....................................................................6

......................................................................6

...........................................................7

.................................................

................................................................

...............................................

................................................................

.......................................

................................................................

...........................................

................................................................

............................. 5555

..........................................................

.............................. 6666

............................................................

................. 7777

..................................

........... 4444

......................

............... 7777

..............................

....... 3333

..............

2

0. Revision History

COMPANY CONFIDENTIAL

Date

2013/3/4 00

2013/3/18

2013-5-15

Document

revision

01

02

Product
revision

Change Description

1. Initial release

1. new add schematic

2. new add BOM

3. new add PCB layout

1. update PCBA picture

2. update outline because add shielding

3. update label and package information

3

COMPANY CONFIDENTIAL

1. Introduction

Project Name: 3D TV BT Module
Project Number: M26H004.01.
This documentation describes the engineering requirements specification of 3D TV BT
Module. It is a confidential document of Foxconn.

1.1 Scope

The BT Module is compliant to Bluetooth 4.0 and EDR compliant:
Carrier Frequency: 2402MHz ~ 2480 MHz
Carrier Spacing: 1.0MHz
Duplexing: TDD
Modulation: FHSS/ GFSK, pi/4-DQPSK, 8DPSK
Symbol Rate: 1Mbps (GFSK), 2Mbps (pi/4-DQPSK), 3Mbps (8DPSK)
This module is designed with 8pin WTB connector and USB Interface, and it is installed
as a client device in TV platform.

1.2 Feature

Bluetooth 4.0+EDR compliant
Programmable output power control meets Class 1, Class 2 requirements.
Support PC and TV applications without external memory.
Support 3D Glass and BT remote control device

1.3 Functional Block Diagram

Sample picture is as below

Top View Bottom View

4

COMPANY CONFIDENTIAL

Pin

2. Mechanical Specification

2.1 Module dimension

Module Dimension: Typical PCB size (W×L): 18mm ×36mm.

2.2 WTB Connector Specification

8pin side entry type WTB CONN, 1.25mm pitch, detail spec as below:

2.3 WTB connector Pin definition

Pin Name I/O Description

No

1 BT_DEVICE_WAKE(GPIO_0) I Allows the SOC host to wake up the BT device
2 BT_HOST_WAKE(GPIO_1) O Allows the BT device to wake up the SOC host
3 USB_5V PWR DC +5V power input
4 HUSBDM I/O USB Data D­5 HUSBDP I/O USB Data D+
6 GND GND Ground

7 3D_SYNC(GPIO_5) I 3D sync clock input
8 BT_RST I BT device reset

5

COMPANY CONFIDENTIAL

Items

Contents

3. Electrical Specification

3.1 Operating Condition

Parameter Condition Min. Typ. Max. Unit
DC Input USB 5V 4.5 5.0 5.5 V
Module Current
(DC input nominal)

Tx Current
Rx Current
Standby Current

0.35

0.17

0.01

Operating Temperature -- 0 +60
Storage Temperature -- -40 +85

3.2 BT RF Specification

A

℃
℃

TX Characteristics

1. Power Levels

BT Output Power (Basic Data Rate)@Class 2 -6 2.0 4 dBm

2. Initial Carrier Frequency Tolerance
Average Offset

3. Carrier Drift
Drift Rate

DH1
DH3
DH5

Average Drift

DH1
DH3
DH5

4. Modulation Characteristic
F1avg
F2max

F1/F2 Ratio

5. EDR Relative Transmit Power

2Mbps: P[DQPSK]-P[GFSK]
3Mbps: P[8DPSK]-P[GFSK]

6. EDR Carrier Frequency Stability and Modulation Accuracy

2Mbps:

Initial Frequency Error: ωi
Frequency Error: ω0
Block Frequency Error: ω
RMS DEVM
Peak DEVM
99% DEVM (% Symbols <=0.3)

3Mbps:

Initial Frequency Error: ωi
Frequency Error: ω0
Block Frequency Error: ω
RMS DEVM
Peak DEVM
99% DEVM (% Symbols <=0.13)

ππππ

/4 DQPSK

8DPSK

i

i

+

+

ω

0

ω

0

Min.

-75 -4.8 75 kHz

-20 -5.54 20 kHz/50us

-20 6.11 20 kHz/50us

-20 5.38 20 kHz/50us

-25 -5 25 kHz

-40 -5 40

-40 -1 40

140 155 175 kHz
115 130

0.8 0.94

-4 0.30 1

-4 0.25 1

-75 -6.1 75

-10 -2.2 10

-75 -7.5 75

- 0.062 0.2

- 0.158 0.35

99% 100%

-75 -9 75

-10 -1.5 10

-75 -10 75

- 0.05 0.13

- 0.13 0.25

99% 100%

Typ.

(@5.0V/25℃)

Max.

Unit

kHz
kHz

kHz

dB

dB

kHz

kHz
kHz

kHz
kHz
kHz

6

COMPANY CONFIDENTIAL

Items

Contents

RX Characteristics

1. Minimum Input Level Sensitivity

GFSK (1Mbps)
π/4 DQPSK (2Mbps)
8DPSK (3Mbps)

2. Maximum Input Level

GFSK (1Mbps)
π/4 DQPSK (2Mbps)
8DPSK (3Mbps)

Min.

- -87 -70 dBm

- -87 -70 dBm

- -80 -70 dBm

-20 0 dBm

-20 -14 dBm

-20 -14 dBm

Typ.

(@5.0V/25℃)

Max.

Unit

3.3 On-board Antenna Specification

Operating Frequency 2.40~2.5GHz
VSWR <=2.0:1
Antenna Type Chip ANT

4. Quality

The product quality must be followed-up by Foxconn factory quality control system.

5. Appendix

5.1 Label Information

7

COMPANY CONFIDENTIAL

5.2 Package Information

8

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter module must not be co-located or operating in conjunction
with any other antenna or transmitter.
This End equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.

IMPORTANT NOTE:

In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no
longer considered valid and the FCC ID can not be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.

End Product Labeling
The final end product must be labeled in a visible area with the following:

“Contains FCC ID: N89-BU067HS ”.

Manual Information to the End User

The OEM integrator has to be aware not to provide information to the end user regarding
how to install or remove this RF module in the user’s manual of the end product which
integrates this module.