CyberResearch MPE 06, MPE 08, MPE 10, MPE 12 User Manual

Displays

MPE Series

Sealed Panel-Mount Touchscreen

LCD Monitors with AC or DC

Power Input

®

USER’S MANUAL

VER. 2.0C• Sep-11

No part of this manual may be reproduced without permission

CyberResearch®,Inc.

www.cyberresearch.com

25 Business Park Dr., Branford, CT 06405 USA

203-643-5000 (9

A.M. to 5 P.M. EST) FAX: [phone]

CyberResearch® Displays

MPE Series

©Copyright 2011

All Rights Reserved.

September 11, 2011

The information in this document is subject to change without prior notice in order
to improve reliability, design, and function and does not represent a commitment
on the part of CyberResearch, Inc.

In no event will CyberResearch, Inc. be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use of or inability to use
the product or documentation, even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All rights
are reserved. No part of this manual may be reproduced by any mechanical,
electronic, or other means in any form without prior written permission of
CyberResearch, Inc.

Trademarks

“CyberResearch,” and “MPE Series,” are trademarks of CyberResearch, Inc.
Other product names mentioned herein are used for identification purposes only
and may be trademarks and/or registered trademarks of their respective
companies.

• NOTICE •

CyberResearch, Inc. does not authorize any CyberResearch product for use in life
support systems, medical equipment, and/or medical devices without the written
approval of the President of CyberResearch, Inc. Life support devices and
systems are devices or systems which are intended for surgical implantation into
the body, or to support or sustain life and whose failure to perform can be
reasonably expected to result in injury. Other medical equipment includes devices
used for monitoring, data acquisition, modification, or notification purposes in
relation to life support, life sustaining, or vital statistic recording. CyberResearch
products are not designed with the components required, are not subject to the
testing required, and are not submitted to the certification required to ensure a
level of reliability appropriate for the treatment and diagnosis of humans.

CyberResearch, Inc. 3

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPE Series CyberResearch® Displays

Revision History

Revision # Description Date of Issue

2.0 Initial Release February 22, 2011

2.0C Revision September 11, 2011

4 ©Copyright 2011 CyberResearch, Inc.

CyberResearch® Displays MPE Series

MPE series Industrial Monitor

Table of Contents

1 INTRODUCTION........................................................................................................ 13

1.1 OVERVIEW................................................................................................................ 14

1.2 FEATURES................................................................................................................. 14

1.3 MODEL VARIATIONS................................................................................................. 15

1.4 APPLICATIONS .......................................................................................................... 15

1.5 EXTERNAL OVERVIEW.............................................................................................. 16

1.5.1 Front View........................................................................................................ 17

1.5.2 Bottom Panel View........................................................................................... 18

1.5.3 Control Board .................................................................................................. 19

1.6 SERIES SPECIFICATIONS............................................................................................ 20

1.7 CERTIFICATIONS ....................................................................................................... 21

2 MECHANICAL OVERVIEW.................................................................................... 22

2.1 INTRODUCTION......................................................................................................... 23

2.2 FRONT PANEL........................................................................................................... 23

2.2.1 Front Panel Variants........................................................................................ 23

2.2.2 Front Panel Variant 1....................................................................................... 24

2.2.3 Front Panel Variant 2....................................................................................... 25

BOTTOM PANEL........................................................................................................ 25

2.3

2.3.1 A vailable Connectors....................................................................................... 25

2.3.2 MPE 06 Connectors......................................................................................... 26

2.3.3 MPE 08 Connectors......................................................................................... 26

2.3.4 MPE 10 Connectors......................................................................................... 26

2.3.5 MPE 12 Connectors......................................................................................... 26

2.4

PHYSICAL DIMENSIONS............................................................................................ 27

2.4.1 General Physical Dimensions.......................................................................... 27

2.4.2 MPE 12 Physical Dimensions.......................................................................... 28

2.4.3 MPE 10 Physical Dimensions.......................................................................... 29

2.4.4 MPE 08 Physical Dimensions.......................................................................... 30

CyberResearch, Inc. 5

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPE Series CyberResearch® Displays

2.4.5 MPE 06 Physical Dimensions.......................................................................... 31

2.5 OPTIONAL MOUNTING KITS ..................................................................................... 32

2.5.1 MPE 06 Mounting Kits .................................................................................... 32

2.5.2 MPE 08 Mounting Kits .................................................................................... 32

2.5.3 MPE 10 Mounting Kits .................................................................................... 33

2.5.4 MPE 12 Mounting Kits .................................................................................... 33

3 LCD SPECIFICATIONS ............................................................................................ 34

3.1 LCD SPECIFICATIONS............................................................................................... 35

3.1.1 LCD Overview ................................................................................................. 35

3.1.2 MPE 12 LCD Specifications............................................................................ 37

3.1.3 MPE 10 LCD Specifications............................................................................ 38

3.1.4 MPE 08 LCD Specifications............................................................................ 39

3.1.5 MPE 06 LCD Specifications............................................................................ 40

4 JUMPERS AND CONNECTORS..............................................................................41

4.1

OVERVIEW................................................................................................................ 42

4.2 MPE 06 CONTROL BOARD....................................................................................... 42

4.2.1 MPE 06 Peripheral Interface Connectors....................................................... 42

4.2.2 MPE 06 Rear Panel Connectors...................................................................... 43

4.3 MPE 08/10 CONTROL BOARD.................................................................................. 44

4.3.1 MPE 08/10 Peripheral Interface Connectors.................................................. 45

4.3.2 MPE 08/10 Rear Panel Connectors................................................................. 45

MPE 12 CONTROL BOARD....................................................................................... 46

4.4

4.4.1 MPE 12 Peripheral Interface Connectors....................................................... 46

4.4.2 MPE 12 Rear Panel Connectors...................................................................... 47

5 INSTALLATION ......................................................................................................... 48

5.1 INSTALLATION PRECAUTIONS................................................................................... 49

5.2 UNPACKING.............................................................................................................. 50

5.2.1 Packaging ........................................................................................................ 50

5.2.2 Unpacking Procedure ...................................................................................... 50

5.2.3 Packing List ..................................................................................................... 51

5.3 PRE-INSTALLATION PREPARATION ............................................................................ 51

5.3.1 Tools................................................................................................................. 51

5.3.2 Voltage Select Jumper Settings ........................................................................ 51

6 ©Copyright 2011 CyberResearch, Inc.

CyberResearch® Displays MPE Series

CONNECTORS ........................................................................................................... 52

5.4

5.4.1 Rear Panel Connectors Overview.................................................................... 53

5.4.2 VGA Connector................................................................................................ 53

5.4.3 DVI-D Connector............................................................................................. 54

5.4.4 12V Power Connector...................................................................................... 55

5.4.5 RS-232 Touch Panel Connector....................................................................... 55

5.4.6 USB Touch Panel Connector ........................................................................... 56

5.4.7 Optional DC Power Connector ....................................................................... 56

5.5 MOUNTING THE MONITOR........................................................................................ 57

5.5.1 Panel Mounting................................................................................................ 57

5.5.1.1 Standard Panel Mounting.......................................................................... 57

5.5.1.2 MPE 06 Panel Mounting........................................................................... 60

5.5.2 Cabinet and Rack Installation ......................................................................... 60

5.5.2.1 Standard Cabinet and Rack Installation.................................................... 61

5.5.2.2 MPE 08 and MPE 06 Cabinet and Rack Installation................................ 63

5.5.3 DIN Rail Installation........................................................................................ 63

5.5.4 Wall Mounting.................................................................................................. 66

5.5.5 Monitor Stand Installation............................................................................... 68

5.5.6 Monitor Arm Installation................................................................................. 70

6 ON-SCREEN-DISPLAY (OSD) CONTROLS.......................................................... 71

6.1

USER MODE OSD STRUCTURE................................................................................. 72

6.1.1 OSD Buttons..................................................................................................... 72

6.1.2 OSD Menu Structure........................................................................................ 73

USING THE OSD....................................................................................................... 75

6.2

6.2.1 Main Display Features..................................................................................... 75

6.2.2 Color................................................................................................................ 76

6.2.3 OSD Configurations......................................................................................... 77

7 SOFTWARE DRIVERS.............................................................................................. 78

7.1 INTRODUCTION......................................................................................................... 79

7.2 RS-232 OR USB TOUCH SCREEN ............................................................................. 79

7.3 TOUCH PANEL DRIVER INSTALLATION...................................................................... 80

7.4 CHANGE THE TOUCH SCREEN INTERFACE ................................................................ 85

7.5 CALIBRATING THE TOUCH SCREEN ........................................................................... 85

CyberResearch, Inc. 7

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPE Series CyberResearch® Displays

8 GASKET REPLACEMENT....................................................................................... 88

GASKET REPLACEMENT ........................................................................................... 89

8.1

A SAFETY PRECAUTIONS......................................................................................... 90

A.1 SAFETY PRECAUTIONS ............................................................................................ 91

A.1.1 General Safety Precautions............................................................................. 91

A.1.2 Anti-static Precautions.................................................................................... 92

A.2 MAINTENANCE AND CLEANING PRECAUTIONS........................................................ 92

A.2.1 Maintenance and Cleaning.............................................................................. 92

A.2.2 Cleaning Tools................................................................................................. 93

8 ©Copyright 2011 CyberResearch, Inc.

CyberResearch® Displays MPE Series

List of Figures

Figure 1 1: MPE series .................................................................................................................14

Figure 1-2: Typical Monitor Front View......................................................................................17

Figure 1-3: Bottom Panel View....................................................................................................18

Figure 1-4: MPE 12 Control Board..............................................................................................19

Figure 2-1: Front Panel Variant 1................................................................................................24

Figure 2-2: Front Panel Variant 3................................................................................................25

Figure 2-3: MPE 12 Physical Dimensions (millimeters)............................................................28

Figure 2-4: MPE 10 Physical Dimensions (millimeters)............................................................29

Figure 2-5: MPE 08 Physical Dimensions (millimeters)............................................................30

Figure 2-6: MPE 06 Physical Dimensions (millimeters)............................................................31

Figure 4-1: MPE 06 Control Board Overview.............................................................................42

Figure 4-2: MPE 08/10 Control Board.........................................................................................44

Figure 4-3: MPE 12 Control Board Overview.............................................................................46

Figure 5-1: Monitor Rear Panel Connections ............................................................................53

Figure 5-2: VGA Connector .........................................................................................................54

Figure 5-3: DVI-D Connector .......................................................................................................54

Figure 5-4: 12V Power Connector...............................................................................................55

Figure 5-5: RS-232 Touch Panel Connector ..............................................................................55

Figure 5-6: USB Touch Panel Connector...................................................................................56

Figure 5-7: DC Power Connector................................................................................................56

Figure 5-8: Panel Opening...........................................................................................................58

Figure 5-9: Insert the Monitor......................................................................................................59

Figure 5-10: Panel Mounting Clamp Position............................................................................59

Figure 5-11: MPE 06 Panel Mounting..........................................................................................60

Figure 5-12: Secure the Cabinet/Rack Bracket..........................................................................62

Figure 5-13: Install into a Cabinet/Rack .....................................................................................63

Figure 5-14: DIN Rail Mounting Bracket.....................................................................................64

Figure 5-15: Screw Locations......................................................................................................64

Figure 5-16: Mounting the DIN RAIL...........................................................................................65

Figure 5-17: Secure the Assembly to the DIN Rail....................................................................65

CyberResearch, Inc. 9

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPE Series CyberResearch® Displays

Figure 5-18: Wall-mounting Bracket...........................................................................................67

Figure 5-19: Monitor Support Screws.........................................................................................67

Figure 5-20: Wall Mounting the Monitor.....................................................................................68

Figure 5-21: VESA Mounting Holes ............................................................................................69

Figure 5-22: Monitor Stand Mounting.........................................................................................69

Figure 5-23: Monitor Arm Mounting............................................................................................70

Figure 6-1: OSD Control Buttons for All Models Except MPE 06............................................72

Figure 6-2: MPE 06 OSD Control Buttons..................................................................................73

Figure 6-3: Main Display Features..............................................................................................75

Figure 6-4: Color Options ............................................................................................................76

Figure 6-5: OSD Configurations Menu .......................................................................................77

Figure 7-1: Select Software/Drivers............................................................................................81

Figure 7-2: Select Touchscreen Drivers.....................................................................................81

Figure 7-3: Select PenMount Touch Drivers..............................................................................82

Figure 7-4: Select PenMount Touch Drivers..............................................................................82

Figure 7-5: Welcome Screen .......................................................................................................83

Figure 7-6: License Agreement...................................................................................................83

Figure 7-7: Initiate Install .............................................................................................................83

Figure 7-8: Installation Starts......................................................................................................84

Figure 7-9: Finish Installation......................................................................................................84

Figure 7-10: PenMount Monitor Icon..........................................................................................85

Figure 7-11: PenMount Monitor Popup Menu............................................................................86

Figure 7-12: Configuration Screen..............................................................................................86

Figure 7-13: Calibration Initiation Screen..................................................................................87

Figure 7-14: Calibration Screen ..................................................................................................87

Figure 8-1: Gasket Replacement.................................................................................................89

10 ©Copyright 2011 CyberResearch, Inc.

CyberResearch® Displays MPE Series

List of Tables

Table 1-1: MPE series Model Variations.....................................................................................15

Table 1-2: MPE series Specifications.........................................................................................21

Table 2-1: Front Panel Variants...................................................................................................23

Table 2-2: General Physical Dimensions ...................................................................................27

Table 2-3: MPE 06 Mounting Kits................................................................................................32

Table 2-4: MPE 08 Mounting Kits................................................................................................33

Table 2-5: MPE 10 Mounting Kits................................................................................................33

Table 2-6: MPE 12 Mounting Kits................................................................................................33

Table 3-1: MPE 12 LCD Specifications.......................................................................................37

Table 3-2: MPE 10 LCD Specifications.......................................................................................38

Table 3-3: MPE 08 LCD Specifications.......................................................................................39

Table 3-4: MPE 06 LDVD Specifications.....................................................................................40

Table 4-1: MPE 06 Peripheral Interface Connectors.................................................................43

Table 4-2: MPE 06 Rear Panel Connectors ................................................................................43

Table 4-3: MPE 08/10 Peripheral Interface Connectors............................................................45

Table 4-4: MPE 08/10 Rear Panel Connectors...........................................................................45

Table 4-5: MPE 12 Peripheral Interface Connectors.................................................................47

Table 4-6: MPE 12 Rear Panel Connectors ................................................................................47

Table 5-1: VGA Connector Pinouts.............................................................................................54

Table 5-2: DVI-D Connector Pinouts...........................................................................................54

Table 5-3: RS-232 Touch Panel Connector Pinouts..................................................................55

Table 5-4: USB Touch Panel Connector Pinouts ......................................................................56

Table 5-5: Panel Mounting Clamps.............................................................................................57

Table 6-1: OSD Menus..................................................................................................................74

CyberResearch, Inc. 11

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPE Series CyberResearch® Displays

Intentionally Blank

12 ©Copyright 2011 CyberResearch, Inc.

CyberResearch® Displays MPE Series

Chapter

1

1 Introduction

CyberResearch, Inc. 13

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPE Series CyberResearch® Displays

1.1 Overview

Figure 1 1: MPE series

The MPE series is RoHS compliant. It is designed to fit industrial automation, or any other
applications that require minimum installation space and flexible configuration. The flat
front panel provides IP 65 protection, which effectively wards off dust and water. Flexible
analog or digital interfaces are provided for ease of connection with a management
computer.

1.2 Features

All the base models listed in Section 1.2.1 have the following standard features

 IP 65 compliant aluminum front panel
 Analog VGA interface supports most general system boards
 Over 300 cd/m
 Analog resistive type touch panel
 Advanced thermal and air-flow design
 Supports panel, rack, wall, DIN rail, stand and arm mounting

2

high brightness LCD panel

 DG models support 9~36V DC power input for mobile application
 RoHS compliant

14 ©Copyright 2011 CyberResearch, Inc.

CyberResearch® Displays MPE Series

1.3 Model Variations

The MPE series LCD monitor has the following seven base models.

 MPE 06: 6.5” LCD screen
 MPE 08: 8.4” LCD screen
 MPE 10: 10.4” LCD screen
 MPE 12: 12.1” LCD screen

The model variations are listed in

Model Number LCD

MPE 06AG 6.5” - Yes
MPE 08AG - Yes
MPE 08DG
MPE 10AG - Yes
MPE 10DG
MPE 12AG - Yes
MPE 12DG

Table 1-1: MPE series Model Variations

1.4 Applications

The MPE series LCD monitor is designed for rigorous industrial environments where it

3Table 1-1.

9~36V Power

Touchscreen

Input

8.4”
Yes Yes

10.4”
Yes Yes

12.1”
Yes Yes

may be exposed to both heat and moisture. Its durability and strength also makes it an
ideal choice for public access computers. Some possible applications include:

 Digital Surveillance
 Digital surveillance
 X-ray imaging terminal
 Multimedia advertising platform
 General Computing

o Computer-based testing center
o General purpose information system
o Mobile nursing station

CyberResearch, Inc. 15

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPE Series CyberResearch® Displays

o Interactive education use

 Automation & Control

o Plant environment monitoring
o Factory automation HMI terminal
o Shop-floor/MES control

 Self-service Kiosk

o Full-service receptionist kiosk
o Hospital self-registering terminal
o Interactive photo kiosk
o Video rental kiosk
o Self-service POS terminal

1.5 External Overview

The MPE series LCD monitors are durable devices that can be used in harsh industrial
environments. The following sections describe the physical layout of the MPE series LCD
monitors.

16 ©Copyright 2011 CyberResearch, Inc.

CyberResearch® Displays MPE Series

1.5.1 Front View

The front of the MPE series LCD monitor is a flat panel LCD screen surrounded by an
aluminum frame. A control button panel (OSD), if available, is located either vertically on
the right side of the frame or horizontally along the bottom of the frame with the following
control buttons:

 LCD On/Off
 Auto
 Left
 Right
 Menu

The OSD panel also has one power LED.

3Figure 1-2 shows a typical monitor front view.

Figure 1-2: Typical Monitor Front View

CyberResearch, Inc. 17

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPE Series CyberResearch® Displays

1.5.2 Bottom Panel View

3Figure 1-3 shows a general bottom panel. Specific models may include or exclude

additional connectors. Refer to Section
All connectors are fully described in Section

32.3 for listings of monitors and their connectors.

35.4.

Figure 1-3: Bottom Panel View

18 ©Copyright 2011 CyberResearch, Inc.

CyberResearch® Displays MPE Series

1.5.3 Control Board

The MPE series LCD monitor control board provides a wide variety of control interfaces,
receiving and managing signals from a CPU card through cabling.

3Figure 1-4 shows the

MPE 12 Control board as a sample of a typical Control board for the MPE series LCD
monitor. Refer to Chapter 4 for a complete description of Control boards and their
c

nnectors.

o

Figure 1-4: MPE 12 Control Board

CyberResearch, Inc. 19

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPE Series CyberResearch® Displays

1.6 Series Specifications

3Table 1-2 shows the MPE series specifications.

Model MPE 06 MPE 08 MPE 10 MPE 12

LCD Size 6.5” 8.4” 10.4” 12.1”

Input

Interface

Max.

Resolution

Brightness (cd/m2)

Contrast 600:1 600:1 700:1 700:1

LCD Color 262K 262K 262K 262K

Pixel Pitch (mm) 0.207 0.213 0.264 0.3075

Front Frame Aluminum Aluminum Aluminum Aluminum

Chassis

View Angle

(H / V)

Power Adapter 36W 36W 36W 36W

OSD function Yes Yes Yes Yes

VGA VGA VGA

640x480 800x600 800x600 1024x768

300 300 300 300

Heavy-duty

steel

160/140 160/140 160/140 160/160

Panel

Heavy-duty

steel

Panel

Heavy-duty

steel

Panel

VGA

DVI-D

Heavy-duty

steel

Panel

Wall

Mounting

Dimension

(WxHxD) (mm)

Color Silver Silver Silver Silver

Operating

Temperature

IP Level IP 65 IP 65 IP 65 IP 65

N/G Weight 1kg 1.8kg 3kg 3.8kg

Rack

DIN

Arm

183 x

143 x

41

-10~50°C -10~50°C -10~50°C -10~50°C

Wall

Rack

Arm

Stand

244 x

178 x

49

Wall

Rack

Arm

Stand

312 x

242 x

53

Wall

Rack

Arm

Stand

340 x

260 x

58

20 ©Copyright 2011 CyberResearch, Inc.

CyberResearch® Displays MPE Series

Model MPE 06 MPE 08 MPE 10 MPE 12

Table 1-2: MPE series Specifications

1.7 Certifications

All MPE series LCD monitor models comply with the following international standards:

 RoHS
 IP 65

CyberResearch, Inc. 21

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPE Series CyberResearch® Displays

Chapter

2

2 Mechanical Overview

22 ©Copyright 2011 CyberResearch, Inc.

CyberResearch® Displays MPE Series

2.1 Introduction

This chapter describes the general mechanical overview of the MPE series monitors
including front and bottom panel variations, available interfaces and overall dimensions.

2.2 Front Panel

The front panel of the MPE series LCD monitor is comprised of a LCD in an aluminum
frame with an OSD control panel.

2.2.1 Front Panel Variants

3Table 2-1 shows the three front panel variants for the MPE series LCD monitor.

Model OSD Control Panel Location

Vertically along the right side

MPE 12, MPE 10, MPE 08

of the aluminum frame

In line along the bottom

MPE 06

of the rear panel

Table 2-1: Front Panel Variants

Variant

Number

1

3

CyberResearch, Inc. 23

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPE Series CyberResearch® Displays

2.2.2 Front Panel Variant 1

The following models of the MPE series LCD monitor have an OSD control panel located
vertically along the right side of the aluminum frame:

 MPE 12
 MPE 10
 MPE 08

3Figure 2-1 shows the location of the front panel variant 1 OSD controls.

Figure 2-1: Front Panel Variant 1

24 ©Copyright 2011 CyberResearch, Inc.

CyberResearch® Displays MPE Series

2.2.3 Front Panel Variant 2

The following model of the MPE series LCD monitor has an OSD control panel located
in-line along the bottom of the aluminum frame:

 MPE 06

3Figure 2-2 shows the location of the front panel variant 3 OSD controls.

Figure 2-2: Front Panel Variant 3

2.3 Bottom Panel

All peripheral device connectors are located on the bottom panel of the MPE series LCD
monitor. The following sections describe the bottom panel variants and their associated
connectors.

2.3.1 Available Connectors

There are a number of bottom panel peripheral device connectors available for the MPE
series LCD monitor.

 VGA connector
 DVI-D connector
 12V power connector
 9~36V terminal block
 RS-232 serial connector
 USB connector

CyberResearch, Inc. 25

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPE Series CyberResearch® Displays

2.3.2 MPE 06 Connectors

The following is a list of the bottom panel peripheral device connectors used on the MPE
06 series LCD monitor.

 VGA connector
 12V power connector
 USB connector for touchscreen

2.3.3 MPE 08 Connectors

The following is a list of the bottom panel peripheral device connectors used on the MPE
08 series LCD monitor.

 VGA connector
 12V power connector
 9~36V terminal block (DG model only)

2.3.4 MPE 10 Connectors

The following is a list of the bottom panel peripheral device connectors used on the MPE
10 series LCD monitor.

 VGA connector
 12V power connector
 RS-232 serial connector for touchscreen
 USB connector for touchscreen
 9~36V terminal block (DG model only)

2.3.5 MPE 12 Connectors

The following is a list of the bottom panel peripheral device connectors used on the MPE
12 series LCD monitor.

 VGA connector
 DVI-D connector
 12V power connector
 RS-232 serial connector for touchscreen

26 ©Copyright 2011 CyberResearch, Inc.

CyberResearch® Displays MPE Series

 USB connector for touchscreen
 9~36V terminal block (DG model only)

2.4 Physical Dimensions

The following sections describe the physical dimensions for each model of the MPE series
LCD monitor.

2.4.1 General Physical Dimensions

General physical dimensions for the MPE series LCD monitors are shown in

3Table 2-2.

Model Width

(mm)

MPE 12 340 260 58
MPE 10 312 242 53
MPE 08 244 178 49
MPE 06 183 143 41

Height

(mm)

Depth

(mm)

Table 2-2: General Physical Dimensions

CyberResearch, Inc. 27

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPE Series CyberResearch® Displays

2.4.2 MPE 12 Physical Dimensions

The physical dimensions of the MPE 12 are shown in 3Figure 2-3.

Figure 2-3: MPE 12 Physical Dimensions (millimeters)

28 ©Copyright 2011 CyberResearch, Inc.

CyberResearch® Displays MPE Series

2.4.3 MPE 10 Physical Dimensions

The physical dimensions of the MPE 10 are shown in 3Figure 2-4.

Figure 2-4: MPE 10 Physical Dimensions (millimeters)

CyberResearch, Inc. 29

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPE Series CyberResearch® Displays

2.4.4 MPE 08 Physical Dimensions

The physical dimensions of the MPE 08 are shown in 3Figure 2-5.

Figure 2-5: MPE 08 Physical Dimensions (millimeters)

30 ©Copyright 2011 CyberResearch, Inc.