CyberResearch MPD series, MPD 19AG, MPD 17AG, MPD 15AG, MPD 12AG User Manual

Industrial Monitors

MPD Series

NEMA 4 Sealed Industrial

Monitors with Optional

Touchscreen

®

USER’S MANUAL

VER. 2.0C • MAY 2008

No part of this manual may be reproduced without permission

CyberResearch®,Inc.

www.cyberresearch.com

25 Business Park Dr., Branford, CT 06405 USA

203-483-8815 (9am to 5pm EST) FAX: [phone]

CyberResearch® Industrial Monitors MPD Series

©Copyright 2008

All Rights Reserved.

May 10th 2008

The information in this document is subject to change without prior notice
in order to improve reliability, design, and function and does not represent
a commitment on the part of CyberResearch, Inc.

In no event will CyberResearch, Inc. be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use of or inability
to use the product or documentation, even if advised of the possibility of
such damages.

This document contains proprietary information protected by copyright.
All rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of CyberResearch, Inc.

Trademarks

“CyberResearch,” and “MPD Series,” are trademarks of CyberResearch,
Inc. Other product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of
their respective companies.

• NOTICE •

CyberResearch, Inc. does not authorize any CyberResearch product for
use in life support systems, medical equipment, and/or medical devices
without the written approval of the President of CyberResearch, Inc. Life
support devices and systems are devices or systems which are intended
for surgical implantation into the body, or to support or sustain life and
whose failure to perform can be reasonably expected to result in injury.
Other medical equipment includes devices used for monitoring, data
acquisition, modification, or notification purposes in relation to life
support, life sustaining, or vital statistic recording. CyberResearch
products are not designed with the components required, are not subject
to the testing required, and are not submitted to the certification required
to ensure a level of reliability appropriate for the treatment and diagnosis of
humans.

CyberResearch, Inc. iii

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPD Series CyberResearch® Industrial Monitors

MPD Series

Revision # Description Date of Issue

1.1 Initial Release July 2007

2.0C Revision May 10th 2008

iv ©Copyright 2008 CyberResearch, Inc.

CyberResearch® Industrial Monitors MPD Series

CyberResearch, Inc. v

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPD Series CyberResearch® Industrial Monitors

ABOUT THIS MANUAL

This document covers the description and installation instructions for the MPD Series

Industrial Monitors. The monitors in this series include the MPD 19AG, MPD 17AG, MPD

15AG, MPD 12AG, MPD 10AG, MPD 08AG and MPD 06AG. Model variations will reflect

the different implementation options, e.g., touch panel.

SAFETY PRECAUTIONS

 Prior to installing, moving, and modifying the monitor, make sure the power is

turned off and the power cord is disconnected.

 Do not apply voltage levels that exceed the specified voltage range. Doing so will

cause fire or an electrical shock.

 Electric shocks can occur if the panel is opened. Do not drop or insert any objects

into the ventilation openings of the monitor.

 Designs with stand-alone and fault-tolerant hardware considerations should be

implemented using the series models as a critical alarm or production line control.

 If considerable amount of dust, water, or fluids entered the monitor, turn off the

power supply immediately, unplug the power cord, and contact the monitor

vendor.

 Explosions may occur with installations in environments where flammable gases

are present.

 Fault-tolerant and failsafe designs should be implemented with the use of the

series models on transportation vehicles, ships, safety/security devices, or

medical devices not related to life-support functionalities. Users should take the

responsibility for implementations with adequate levels of reliability and safety.

FURTHER PRECAUTIONS

 Do not drop the monitor against a hard surface. Doing so will damage the display.

 Do not strike or exert excessive force onto the touch panel.

 Touching the touch panel using a sharp object will damage the LCD panel.

 Avoid environments exposed to direct sunlight, dust, or chemical vapors.

vi ©Copyright 2008 CyberResearch, Inc.

CyberResearch® Industrial Monitors MPD Series



The ambient temperature of the installation site should be observed and

controlled to avoid overheating the monitor.

 Condensation might form inside the monitor chassis if exposed to sudden

changes in temperature.

 Carefully route the power cord so that people cannot step on it. Do not place

anything over the power cord.

 If the equipment should be left unused for an extended period of time, disconnect

it from the power source to avoid damage by transient over-voltage.

 If any of the following situations arise, have the equipment checked by qualified

service personnel:

o The power cord or plug is damaged.
o Liquid has penetrated into the equipment.
o The equipment has been exposed to moisture.
o The equipment does not work properly, or cannot be made to work

according to the user manual.

o The equipment has been dropped and damaged.
o The equipment shows obvious signs of damage.

WARNING!

Any changes or modifications made to the equipment that are not
expressly approved by the relevant standards could void the authority to
operate the equipment.

ADDITIONAL INFORMA TION AND ASSISTANCE

MAINTENANCE AND CLEANING

Prior to cleaning any part or component of the monitor, please read the details below.

 Except for the properly installed front LCD panel, never spray or squirt liquids

directly onto any other component. To clean the front panel, please rub it with a

piece of soft dry cloth or a slightly moistened cloth.

 The interior of the LCD monitor does not require cleaning. Keep fluids away from

the LCD monitor interior.

CyberResearch, Inc. vii

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPD Series CyberResearch® Industrial Monitors

Be cautious of all small removable components when vacuuming the monitor.



 Turn the system off before cleaning the LCD monitor.

 Never drop any objects or liquids through the openings of the LCD monitor.

 Be cautious of any possible allergic reactions to solvents or chemicals used when

cleaning the monitor.

 Avoid eating, drinking and smoking within vicinity of the monitor.

CLEANING TOOLS

Some components in the monitor may only be cleaned using a product specifically

designed for the purpose. In such case, the product will be explicitly mentioned in the

cleaning tips. Below is a list of items to use when cleaning the computer or computer

peripherals.

 Cloth – Although paper towels or tissues can be used, a soft, clean piece of cloth

is recommended when cleaning the monitor.

 Water or rubbing alcohol – A cloth moistened with water or rubbing alcohol can

be used to clean the monitor.

 Using solvents – The use of solvents is not recommended when cleaning the

monitor as they may damage the plastic parts.

 Vacuum cleaner – Using a vacuum specifically designed for computers is one of

the best methods of cleaning the monitor. Over dust and dirt can restrict the

airflow in a computer and cause circuitry to corrode.

 Cotton swabs - Cotton swaps moistened with rubbing alcohol or water are

excellent tools for wiping hard to reach areas.

 Foam swabs - Whenever possible, it is best to use lint free swabs such as foam

swabs for cleaning.

ESD PRECAUTIONS

Observe all conventional anti-ESD methods while handling the components contained

within the LCD should the need arise for adding a functionality. The use of a grounded

wrist strap and an anti-static work pad is recommended. Avoid dust and debris or other

static-accumulating materials in the work area.

viii ©Copyright 2008 CyberResearch, Inc.

CyberResearch® Industrial Monitors MPD Series

CyberResearch, Inc. ix

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPD Series CyberResearch® Industrial Monitors

CONVENTIONS USED IN THIS MANUAL

WARNING!

Warnings appear where overlooked details may cause damage to the equipment or result

in personal injury. Warnings should be taken seriously. Warnings are easy to recognize.

The word “warning” is written as “WARNING,” both capitalized and bold and is followed by

text in italics. The italicized text is the warning message.

CAUTION!

Cautionary messages should also be heeded to helps reduce the chance of losing data or

damaging the system. Cautions are easy to recognize. The word “caution” is written as

“CAUTION,” both capitalized and bold and is followed by text in italics. The italicized text is

the cautionary message.

NOTE:

These messages inform the reader of essential but non-critical information. These

messages should be read carefully as any directions or instructions contained therein can

helps avoid making mistakes. Notes are easy to recognize. The word “note” is written as

“NOTE,” both capitalized and bold and is followed by text in italics. The italicized text is the

cautionary message.

LISTS

Bulleted Lists: Bulleted lists are statements of non-sequential facts that can be read in

any order. Each statement is preceded by a round black dot “•” or bullets in other shapes.

Numbered Lists: Numbered lists describe sequential steps should be followed in order.

x ©Copyright 2008 CyberResearch, Inc.

CyberResearch® Industrial Monitors MPD Series

Table of Contents

1 INTRODUCTION..................................................................................................... 1

1.1 MPD SERIES INDUSTRIAL MONITOR OVERVIEW ........................................................ 2

1.1.1 Standard Features.............................................................................................. 2

1.1.2 Model Variations................................................................................................ 2

1.2 APPLICATIONS AND FEATURES.................................................................................... 2

1.2.1 MPD Series Industrial Monitor Applications.................................................... 2

1.2.2 MPD Series Industrial Monitor Features.......................................................... 3

1.3 EXTERNAL OVERVIEW................................................................................................ 4

1.3.1 Front View.......................................................................................................... 5

1.3.2 Bottom Panel View............................................................................................. 6

1.3.3 LCD Controller.................................................................................................. 7

1.4 SERIES SPECIFICATIONS.............................................................................................. 8

1.5 CERTIFICATIONS......................................................................................................... 9

2 MECHANICAL OVERVIEW................................................................................11

2.1 INTRODUCTION......................................................................................................... 12

2.2 FRONT PANEL........................................................................................................... 12

2.2.1 Front Panel Variants........................................................................................ 12

2.2.2 Front Panel Variant 1....................................................................................... 13

2.2.3 Front Panel Variant 2....................................................................................... 14

2.2.4 Front Panel Variant 3....................................................................................... 15

2.3 BOTTOM PANEL........................................................................................................ 15

2.3.1 A vailable Connectors....................................................................................... 15

2.3.2 MPD 06AG Connectors................................................................................... 16

2.3.3 MPD 08AG Connectors................................................................................... 16

2.3.4 MPD 10AG Connectors................................................................................... 16

2.3.5 MPD 12AG Connectors................................................................................... 17

2.3.6 MPD 15AG Connectors................................................................................... 17

2.3.7 MPD 17AG Connectors................................................................................... 17

2.3.8 MPD 19AG Connectors................................................................................... 18

2.4 PHYSICAL DIMENSIONS............................................................................................ 18

CyberResearch, Inc. xi

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPD Series CyberResearch® Industrial Monitors

2.4.1 General Physical Dimensions.......................................................................... 18

2.4.2 MPD 19AG Physical Dimensions.................................................................... 19

2.4.3 MPD 17AG Physical Dimensions.................................................................... 20

2.4.4 MPD 15AG Physical Dimensions.................................................................... 21

2.4.5 MPD 12AG Physical Dimensions.................................................................... 22

2.4.6 MPD 10AG Physical Dimensions.................................................................... 23

2.4.7 MPD 08AG Physical Dimensions.................................................................... 24

2.4.8 MPD 06AG Physical Dimensions.................................................................... 25

2.5 OPTIONAL MOUNTING KITS ..................................................................................... 26

2.5.1 MPD 06AG Mounting Kits............................................................................... 26

2.5.2 MPD 08AG Mounting Kits............................................................................... 26

2.5.3 MPD 10AG Mounting Kits............................................................................... 27

2.5.4 MPD 12AG Mounting Kits............................................................................... 27

2.5.5 MPD 15AG Mounting Kits............................................................................... 28

2.5.6 MPD 17AG Mounting Kits............................................................................... 28

2.5.7 MPD 19AG Mounting Kits............................................................................... 29

2.6 MOUNTING OPTIONS................................................................................................ 29

2.6.1 Panel Mounting................................................................................................ 29

2.6.2 Rack and Cabinet Mounting ............................................................................ 31

2.6.3 Wall Mounting.................................................................................................. 32

2.6.4 DIN Rail Mounting .......................................................................................... 33

2.6.5 Monitor Arm or Stand Mounting......................................................................34

3 LCD AND TOUCH PANEL SPECIFICATIONS ................................................ 35

LCD SPECIFICATIONS............................................................................................... 36

3.1

3.1.1 LCD Overview ................................................................................................. 36

3.1.2 MPD 19AG LCD Specifications ...................................................................... 37

3.1.3 MPD 17AG LCD Specifications ...................................................................... 38

3.1.4 MPD 15AG LCD Specifications ...................................................................... 39

3.1.5 MPD 12AG LCD Specifications ...................................................................... 40

3.1.6 MPD 10AG LCD Specifications ...................................................................... 41

3.1.7 MPD 08AG LCD Specifications ...................................................................... 42

3.1.8 MPD 06AG LCD Specifications ...................................................................... 43

3.2 OPTIONAL TOUCH PANELS ....................................................................................... 44

3.2.1 Touch Panel Models......................................................................................... 44

xii ©Copyright 2008 CyberResearch, Inc.

CyberResearch® Industrial Monitors MPD Series

3.2.2 Touch Panel Dimensions.................................................................................. 45

3.2.3 Touch Panel Specifications .............................................................................. 46

3.2.4 Touch Panel RS-232 Controller Specifications................................................ 47

3.2.5 Touch Panel USB Controller Specifications.................................................... 48

3.3 POWER ADAPTERS.................................................................................................... 49

4 LCD CONTROLLERS .......................................................................................... 51

4.1 LCD CONTROLLER OVERVIEW ................................................................................ 52

4.2 9350 LCD CONTROLLER.......................................................................................... 52

4.2.1 9350 LCD Controller Overview....................................................................... 52

4.2.2 9350 LCD Controller Connectors.................................................................... 52

4.2.3 9350 LCD Controller Layout........................................................................... 53

4.2.4 9350 LCD Controller Peripheral Interface Connectors.................................. 54

4.2.5 9350 LCD Controller Rear Panel Connectors ................................................ 54

4.2.6 9350 LCD Controller Onboard Jumper........................................................... 55

4.2.7 9350 LCD Controller Internal Peripheral Connectors ................................... 55

4.2.8 5V Power Connector........................................................................................ 56

4.2.9 Debugged Port Connector............................................................................... 57

4.2.10 External OSD and LED Indication Connector.............................................. 59

4.2.11 Serial Communications Connector ................................................................ 60

4.2.12 TTL Output Connector................................................................................... 61

4.2.13 VGA Connector.............................................................................................. 63

4.2.14 9350 External (Rear Panel) Connectors........................................................ 64

4.2.15 DC 12V Connector......................................................................................... 64

4.2.16 RS232 Serial Connector................................................................................. 65

4.2.17 OSD Control Buttons..................................................................................... 66

4.2.18 VGA Connector.............................................................................................. 67

4.2.19 9350 Onboard Jumper................................................................................... 68

4.2.20 LCD Panel (TTL) Voltage Select Jumper....................................................... 69

5350 LCD CONTROLLER.......................................................................................... 70

4.3

4.3.1 5350 LCD Controller Overview....................................................................... 70

4.3.2 5350 LCD Controller Connectors.................................................................... 70

4.3.3 5350 LCD Controller Layout........................................................................... 71

4.3.4 5350 Peripheral Interface Connectors ............................................................ 72

4.3.5 5350 Rear Panel Connectors........................................................................... 72

CyberResearch, Inc. xiii

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPD Series CyberResearch® Industrial Monitors

4.3.6 5350 Onboard Jumper..................................................................................... 72

4.3.7 5350 Internal Peripheral Connectors.............................................................. 73

4.3.8 5V Power Connector........................................................................................ 73

4.3.9 12V Power Connector...................................................................................... 74

4.3.10 Backlight Inverter Connector ........................................................................ 74

4.3.11 External OSD and LED Indication Connector .............................................. 75

4.3.12 LVDS Output Connector................................................................................ 76

4.3.13 VGA Connector.............................................................................................. 78

4.3.14 5350 External (Rear Panel) Connectors........................................................ 79

4.3.15 DC 12V Connector......................................................................................... 81

4.3.16 VGA Connector.............................................................................................. 81

4.3.17 5350 Onboard Jumper................................................................................... 82

4.3.18 LCD Panel Voltage Select Jumper................................................................. 83

4.4 5300 LCD CONTROLLER OVERVIEW........................................................................ 84

4.4.1 5300 LCD Controller Connectors.................................................................... 85

4.4.2 5300 LCD Controller Layout........................................................................... 86

4.4.3 5300 Peripheral Interface Connectors ............................................................ 87

4.4.4 5300 Rear Panel Connectors........................................................................... 87

4.4.5 5300 On-board Jumpers.................................................................................. 88

4.4.6 5300 Internal Peripheral Connectors.............................................................. 88

4.4.7 Auto-Dimming Connector................................................................................ 88

4.4.8 Debug Port Connector..................................................................................... 89

4.4.9 External OSD and LED Indication Connector................................................ 90

4.4.10 Backlight Inverter Connector ........................................................................ 91

4.4.11 LVDS Output Connector ................................................................................ 92

4.4.12 Power Output Connector............................................................................... 93

4.4.13......................................................................................................................... 94

4.4.14 Power Input Connector.................................................................................. 95

4.4.15 VGA Connector.............................................................................................. 96

4.4.16 5300 On-board Jumpers................................................................................ 97

4.4.17 LCD Panel Power Input Jumper.................................................................... 98

4.4.18 LCD Panel Voltage Select Jumper................................................................. 98

4.4.19......................................................................................................................... 98

4.4.20 5300 External (Rear Panel) Connectors........................................................ 99

4.4.21 DC 12V Connector......................................................................................... 99

xiv ©Copyright 2008 CyberResearch, Inc.

CyberResearch® Industrial Monitors MPD Series

4.4.22 VGA Connector............................................................................................ 100

4.4.23 DVI-D Connector......................................................................................... 101

5 INSTALLATION .................................................................................................. 103

5.1 INSTALLATION PRECAUTIONS ................................................................................. 104

5.2 UNPACKING............................................................................................................ 105

5.2.1 Packaging ...................................................................................................... 105

5.2.2 Unpacking Procedure .................................................................................... 105

5.2.3 Packing List ................................................................................................... 106

PRE-INSTALLATION PREPARATION .......................................................................... 106

5.3

5.3.1 Tools............................................................................................................... 106

5.3.2 Voltage Select Jumper Settings ...................................................................... 107

5.4 CONNECTORS ......................................................................................................... 108

5.4.1 Rear Panel Connectors Overview.................................................................. 109

5.4.2 VGA Connector.............................................................................................. 109

5.4.3 DVI-D Connector............................................................................................110

5.4.4 12V Power Connector.....................................................................................110

5.4.5 Optional DC Power Connector ......................................................................111

5.4.6 Optional RS-232 Touch Panel Connector.......................................................111

5.4.7 Optional USB Touch Panel Connector ...........................................................112

5.5

MOUNTING THE MPD SERIES INDUSTRIAL MONITOR .............................................113

5.5.1 Panel Mounting...............................................................................................113

5.5.1.1 Standard Panel Mounting.........................................................................113

5.5.1.2 MPD 06AG Panel Mounting ...................................................................115

5.5.2 Cabinet and Rack Installation ........................................................................116

5.5.2.1 Standard Cabinet and Rack Installation...................................................116

5.5.2.2 MPD 19AG Cabinet and Rack Installation..............................................119

5.5.2.3 MPD 08AG and MPD 06AG Cabinet and Rack Installation ..................119

5.5.3 DIN Rail Installation...................................................................................... 120

5.5.4 Wall Mounting................................................................................................ 121

5.5.5 Monitor Stand Installation............................................................................. 124

5.5.6 Monitor Arm Installation............................................................................... 125

6 ON-SCREEN-DISPLAY (OSD) CONTROLS ................................................... 127

USER MODE OSD STRUCTURE............................................................................... 128

6.1

6.1.1 OSD Buttons................................................................................................... 128

CyberResearch, Inc. xv

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPD Series CyberResearch® Industrial Monitors

6.1.2 OSD Menu Structure – All Models Except MPD 06AG................................. 129

6.1.3 MPD 06AG OSD Menu Structure.................................................................. 131

USING THE OSD..................................................................................................... 132

6.2

6.2.1 Main Display Features................................................................................... 132

6.2.2 Color.............................................................................................................. 133

6.2.3 Language........................................................................................................ 134

6.2.4 OSD Configurations....................................................................................... 135

6.2.5 Signal ............................................................................................................. 136

6.2.6 Backlight........................................................................................................ 136

7 SOFTWARE DRIVERS....................................................................................... 139

7.1 INTRODUCTION....................................................................................................... 140

7.2 DRIVER INSTALLATION........................................................................................... 140

7.3

TOUCH PANEL DRIVER CONFIGURATION ................................................................ 147

8 GASKET REPLACEMENT................................................................................ 149

8.1 GASKET REPLACEMENT ......................................................................................... 150

A CERTIFICATIONS.............................................................................................. 151

A.1 ROHS COMPLIANT................................................................................................ 152

A.2 NEMA 4 COMPLIANT FRONT PANEL ..................................................................... 152

B INDEX.................................................................................................................... 153

xvi ©Copyright 2008 CyberResearch, Inc.

CyberResearch® Industrial Monitors MPD Series

List of Figures

Figure 1-1: Typical Monitor Front View.......................................................................5

Figure 1-2: Typical Bottom Panel View.......................................................................6

Figure 1-3: 5300 LCD Controller..................................................................................7

Figure 2-1: Front Panel Variant 1...............................................................................13

Figure 2-2: Front Panel Variant 2...............................................................................14

Figure 2-3: Front Panel Variant 3...............................................................................15

Figure 2-4: MPD 19AG Physical Dimensions (millimeters).....................................19

Figure 2-5: MPD 17AG Physical Dimensions (millimeters).....................................20

Figure 2-6: MPD 15AG Physical Dimensions (millimeters).....................................21

Figure 2-7: MPD 12AG Physical Dimensions (millimeters).....................................22

Figure 2-8: MPD 10AG Physical Dimensions (millimeters).....................................23

Figure 2-9: MPD 08AG Physical Dimensions (millimeters).....................................24

Figure 2-10: MPD 06AG Physical Dimensions (millimeters)...................................25

Figure 2-11: Typical Panel Mounting.........................................................................30

Figure 2-12: Typical Rack or Cabinet Mounting.......................................................31

Figure 2-13: Typical Wall Mounting...........................................................................32

Figure 2-14: Typical DIN Rail Mounting ....................................................................33

Figure 2-15: Typical Monitor Arm or Stand Mounting.............................................34

Figure 4-1: 9350 LCD Controller Overview...............................................................52

Figure 4-2: Connector and Jumper Locations.........................................................53

Figure 4-3: 5V Power Connector Location ...............................................................56

Figure 4-4: Debugged Port Connector Location......................................................57

Figure 4-5: External OSD and LED Indication Connector Location.......................59

Figure 4-6: Serial Communications Connector Location........................................60

Figure 4-7: TTL Output Connector Location ............................................................62

CyberResearch, Inc. xvii

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPD Series CyberResearch® Industrial Monitors

Figure 4-8: VGA Connector Location........................................................................64

Figure 4-9: 9350 External (Rear Panel) Connectors ................................................64

Figure 4-10: RS232 Serial Connector Pinout Locations..........................................65

Figure 4-11: VGA Connector Pinout Locations........................................................67

Figure 4-12: Jumpers..................................................................................................68

Figure 4-13: Jumper Location....................................................................................68

Figure 4-14: 5350 LCD Controller Overview.............................................................70

Figure 4-15: Connector and Jumper Locations .......................................................71

Figure 4-16: 5V Power Connector Location .............................................................74

Figure 4-17: 12V Power Connector Location ...........................................................74

Figure 4-18: Backlight Inverter Connector Location...............................................75

Figure 4-19: External OSD and LED Indication Connector Location.....................76

Figure 4-20: LVDS Output Connector Location .......................................................78

Figure 4-21: VGA Connector Location......................................................................79

Figure 4-22: 5350 External (Rear Panel) Connectors ..............................................80

Figure 4-23: VGA Connector Pinout Locations........................................................82

Figure 4-24: Jumpers..................................................................................................82

Figure 4-25: Jumper Location....................................................................................83

Figure 4-26: 5300 LCD Controller Overview.............................................................84

Figure 4-27: Connector and Jumper Locations .......................................................86

Figure 4-28: Auto-dimming Connector Location.....................................................89

Figure 4-29: Debug Port Connector Location ..........................................................90

Figure 4-30: External OSD and LED Indication Connector Location.....................91

Figure 4-31: Backlight Inverter Connector Location...............................................92

Figure 4-32: LVDS Output Connector Location .......................................................93

Figure 4-33: Power Output Connector Locations....................................................94

Figure 4-34: Power Input Connector Locations.......................................................95

Figure 4-35: VGA Connector Location......................................................................96

Figure 4-36: Jumpers..................................................................................................97

xviii ©Copyright 2008 CyberResearch, Inc.

CyberResearch® Industrial Monitors MPD Series

Figure 4-37: Jumper Locations..................................................................................97

Figure 4-38: 5300 External (Rear Panel) Connectors ..............................................99

Figure 4-39: VGA Connector Pinout Locations..................................................... 100

Figure 4-40: DVI-D Connector Pinout Locations................................................... 101

Figure 5-1: Monitor Rear Panel Connections........................................................ 109

Figure 5-2: VGA Connector..................................................................................... 110

Figure 5-3: DVI-D Connector................................................................................... 110

Figure 5-4: 12V Power Connector........................................................................... 110

Figure 5-5: DC Power Connector............................................................................ 111

Figure 5-6: Optional RS-232 Touch Panel Connector .......................................... 111

Figure 5-7: Optional USB Touch Panel Connector............................................... 112

Figure 5-8: Panel Opening....................................................................................... 114

Figure 5-9: Insert the Monitor ................................................................................. 114

Figure 5-10: Panel Mounting Clamp Position........................................................ 115

Figure 5-11: MPD 06AG Panel Mounting................................................................ 116

Figure 5-12: Secure the Cabinet/Rack Bracket..................................................... 117

Figure 5-13: Install into a Cabinet/Rack................................................................. 118

Figure 5-14: MPD 19AG Rack Mounting................................................................. 119

Figure 5-15: DIN Rail Mounting Bracket................................................................. 120

Figure 5-16: Screw Locations................................................................................. 120

Figure 5-17: Mounting the DIN RAIL....................................................................... 121

Figure 5-18: Secure the Assembly to the DIN Rail................................................ 121

Figure 5-19: Wall-mounting Bracket....................................................................... 122

Figure 5-20: Monitor Support Screws.................................................................... 123

Figure 5-21: Wall Mounting the Monitor................................................................. 124

Figure 5-22: VESA Mounting Holes........................................................................ 125

Figure 5-23: Monitor Stand Mounting .................................................................... 125

Figure 5-24: Monitor Arm Mounting....................................................................... 126

Figure 6-1: OSD Control Buttons for All Models Except MPD 06AG.................. 128

CyberResearch, Inc. xix

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPD Series CyberResearch® Industrial Monitors

Figure 6-2: MPD 06AG OSD Control Buttons........................................................ 129

Figure 6-3: Main Display Features.......................................................................... 133

Figure 6-4: Color Options........................................................................................ 133

Figure 6-5: Language Menu .................................................................................... 134

Figure 6-6: OSD Configurations Menu................................................................... 135

Figure 6-7: Signal Menu........................................................................................... 136

Figure 6-8: Backlight Menu ..................................................................................... 137

Figure 7-1: Driver CD Pop Up Screen..................................................................... 141

Figure 7-2: Install Shield Wizard Preparation........................................................ 142

Figure 7-3: Welcome Screen................................................................................... 142

Figure 7-4: Install PS/2 Interface Driver................................................................. 143

Figure 7-5: Install PS/2 Interface Driver................................................................. 144

Figure 7-6: Touch Monitor/USB Touch Controller Confirmation ........................ 144

Figure 7-7: Controller Installation Directory.......................................................... 145

Figure 7-8: Program Icon Directory........................................................................ 146

Figure 7-9: Installing................................................................................................ 147

Figure 7-10: Installation Complete ......................................................................... 147

Figure 8-1: Gasket Replacement ............................................................................ 150

xx ©Copyright 2008 CyberResearch, Inc.

CyberResearch® Industrial Monitors MPD Series

List of Tables

Table 1-2: MPD Series Specifications.........................................................................9

Table 2-1: Front Panel Variants .................................................................................12

Table 2-2: General Physical Dimensions..................................................................18

Table 2-3: MPD 06AG Mounting Kits.........................................................................26

Table 2-4: MPD 08AG Mounting Kits.........................................................................26

Table 2-5: MPD 10AG Mounting Kits.........................................................................27

Table 2-6: MPD 12AG Mounting Kits.........................................................................27

Table 2-7: MPD 15AG Mounting Kits.........................................................................28

Table 2-8: MPD 17AG Mounting Kits.........................................................................28

Table 2-9: MPD 19AG Mounting Kits.........................................................................29

Table 2-10: Panel Mounting Clamps..........................................................................30

Table 2-11: Rack Mounting Clamps...........................................................................32

Table 3-1: MPD 19AG LCD Specifications................................................................37

Table 3-2: MPD 17AG LCD Specifications................................................................38

Table 3-3: MPD 15AG LCD Specifications................................................................39

Table 3-4: MPD 12AG LCD Specifications................................................................40

Table 3-5: MPD 10AG LCD Specifications................................................................41

Table 3-6: MPD 08AG LCD Specifications................................................................42

Table 3-7: MPD 06AG LCD Specifications................................................................43

Table 3-8: Touch Panel Models..................................................................................44

Table 3-9: Touch Panel Dimensions (mm)................................................................45

Table 3-10: Touch Panel Specifications....................................................................46

Table 3-11: Touch Panel RS-232 Controller Specifications....................................47

Table 3-12: Touch Panel USB Controller Specifications.........................................48

Table 3-13: Power Adapter Specifications ...............................................................49

Table 4-1: 9350 Peripheral Interface Connectors.....................................................54

CyberResearch, Inc. xxi

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPD Series CyberResearch® Industrial Monitors

Table 4-2: 9350 LCD Controller Rear Panel Connectors.........................................54

Table 4-3: 9350 Onboard Jumper ..............................................................................55

Table 4-4: 5V Power Connector Pinouts...................................................................56

Table 4-5: Debugged Port Connector Pinouts.........................................................57

Table 4-6: External OSD and LED Indication Connector Pinouts..........................59

Table 4-7: Serial Communications Connector Pinouts...........................................60

Table 4-8: TTL Output Connector Pinouts................................................................61

Table 4-9: VGA Connector Pinouts ...........................................................................63

Table 4-10: DC 12V Connector Pinouts.....................................................................65

Table 4-11: RS232 Serial Connector Pinouts...........................................................65

Table 4-12: OSD Control Button JP1 Pinouts ..........................................................66

Table 4-13: OSD Control Button JP2 Pinouts ..........................................................66

Table 4-14: OSD Control Button JP3 Pinouts ..........................................................66

Table 4-15: OSD Control Button JP4 Pinouts ..........................................................66

Table 4-16: VGA Connector Pinouts .........................................................................67

Table 4-17: LCD Panel (TTL) Voltage Select Jumper Settings ...............................69

Table 4-18: 5350 Peripheral Interface Connectors...................................................72

Table 4-19: 5350 Rear Panel Connectors..................................................................72

Table 4-20: 5350 Onboard Jumper ............................................................................72

Table 4-21: 5V Power Connector Pinouts.................................................................73

Table 4-22: 12V Power Connector Pinouts...............................................................74

Table 4-23: Backlight Inverter Connector Pinouts...................................................75

Table 4-24: External OSD and LED Indication Connector Pinouts........................76

Table 4-25: LVDS Output Connector Pinouts...........................................................77

Table 4-26: VGA Connector Pinouts .........................................................................79

Table 4-27: DC 12V Connector Pinouts.....................................................................81

Table 4-28: VGA Connector Pinouts .........................................................................82

Table 4-29: LCD Panel Voltage Select Jumper Settings .........................................83

Table 4-30: 5300 Peripheral Interface Connectors...................................................87

xxii ©Copyright 2008 CyberResearch, Inc.

CyberResearch® Industrial Monitors MPD Series

Table 4-31: 5300 Rear Panel Connectors..................................................................87

Table 4-32: 5300 On-board Jumpers.........................................................................88

Table 4-33: Auto-dimming Connector Pinouts.........................................................89

Table 4-34: Debug Port Connector Pinouts..............................................................89

Table 4-35: External OSD and LED Indication Connector Pinouts........................90

Table 4-36: Backlight Inverter Connector Pinouts...................................................92

Table 4-37: LVDS Output Connector Pinouts...........................................................93

Table 4-38: Power Output Connector Pinouts (CN12).............................................94

Table 4-39: Power Output Connector Pinouts (CN13).............................................94

Table 4-40: Power Input Connector Pinouts (CN24)................................................95

Table 4-41: Power Input Connector Pinouts (CN25)................................................95

Table 4-42: VGA Connector Pinouts .........................................................................96

Table 4-43: LCD Panel Power Input Jumper Settings .............................................98

Table 4-44: LCD Panel Voltage Select Jumper Settings .........................................98

Table 4-45: DC 12V Connector Pinouts.....................................................................99

Table 4-46: VGA Connector Pinouts ...................................................................... 100

Table 4-47: DVI-D Connector Pinouts .................................................................... 101

Table 5-1: Rear Panel Connectors.......................................................................... 108

Table 5-2: VGA Connector Pinouts ........................................................................ 109

Table 5-3: DVI-D Connector Pinouts ...................................................................... 110

Table 5-4: Optional RS-232 Touch Panel Connector Pinouts.............................. 111

Table 5-5: Optional USB Touch Panel Connector Pinouts .................................. 112

Table 6-1: OSD Menus – All Models Except MPD 06AG....................................... 130

Table 6-2: MPD 06AG OSD Menus.......................................................................... 132

CyberResearch, Inc. xxiii

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPD Series CyberResearch® Industrial Monitors

Intentionally Blank

xxiv ©Copyrigh t 2008 CyberResearch, Inc.

CyberResearch® Industrial Monitors MPD Series

Chapter

1

1 Introduction

CyberResearch, Inc. 1

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPD Series CyberResearch® Industrial Monitors

1.1 MPD Series Industrial Monitor Overview

The MPD Series industrial monitor is the latest member of CyberResearch’s line of

sophisticated LCD designs, and it has been improved to be RoHS compliant. It is

designed to fit industrial automation, or any other applications that require minimum

installation space and flexible configuration. The flat front panel provides IP 65 protection,

which effectively wards off dust and water. Flexible analog or digital interfaces are

provided for ease of connection with a management computer. Resistive type touch

panels are optional. If remote/non-attentive control is preferred, RS-232 or USB interfaces

can be used with customized adapter cables.

1.1.1 Standard Features

All the base models listed in Section 1.2.1 have the following standard features

 LCD monitor

 VGA

 Silver color

 Aluminum front

 RoHS compliance

1.1.2 Model Variations

The MPD LCD series have the following seven base models.

 MPD 06AG: 6.5” LCD screen

 MPD 08AG: 8.4” LCD screen

 MPD 10AG: 10.4” LCD screen

 MPD 12AG: 12.1” LCD screen

 MPD 15AG: 15” LCD screen

 MPD 17AG: 17” LCD screen

 MPD 19AG: 19” LCD screen

1.2 Applications and Features

1.2.1 MPD Series Industrial Monitor Applications

2 ©Copyright 2008 CyberResearch, Inc.

CyberResearch® Industrial Monitors MPD Series

The MPD Series industrial monitor is designed for rigorous industrial environments where

it may be exposed to both heat and moisture. Its durability and strength also makes it an

ideal choice for public access computers. Some possible applications include:

 Digital Surveillance

• Digital surveillance

• X-ray imaging terminal

• Multimedia advertising platform

 General Computing

o Computer-based testing center
o General purpose information system
o Mobile nursing station
o Interactive education use

 Automation & Control

o Plant environment monitoring
o Factory automation HMI terminal
o Shop-floor/MES control

 Self-service Kiosk

o Full-service receptionist kiosk
o Hospital self-registrating terminal
o Interactive photo kiosk
o Video rental kiosk
o Self-service POS terminal

1.2.2 MPD Series Industrial Monitor Features

Some of the features of the MPD Series industrial monitor include:

 IP 65 compliant aluminum front panel

 Analog VGA interface supports most general system boards

 Optional RS-232 or USB interface touch panel

 Over 300 cd/m2 high brightness and 50000hrs MTFB long lifetime panel

 Advanced thermal and air-flow design

 Supports panel, rack, wall, DIN rail, stand and arm mounting

 M models support 9~36V DC power input for mobile application

CyberResearch, Inc. 3

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPD Series CyberResearch® Industrial Monitors



Long product life support

 RoHS compliant

 Analog resistive type touch panel (optional)

1.3 External Overview

The MPD Series industrial monitors are durable devices that can be used in harsh

industrial environments. The following sections describe the physical layout of the MPD

Series industrial monitors.

4 ©Copyright 2008 CyberResearch, Inc.

CyberResearch® Industrial Monitors MPD Series

1.3.1 Front View

The front of the MPD Series industrial monitor is a flat panel TFT LCD screen surrounded

by an aluminum frame. A control button panel (OSD), if available, is located either

vertically on the right side of the frame or horizontally along the bottom of the frame with

the following control buttons:

 LCD On/Off

 Auto

 Left

 Right

 Menu

The OSD panel also has one power LED.

Figure 1-1 shows a typical monitor front view.

Figure 1-1: Typical Monitor Front View

CyberResearch, Inc. 5

25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

MPD Series CyberResearch® Industrial Monitors

1.3.2 Bottom Panel View

Figure 1-2 shows the bottom panel of the MPD 19AG monitor. Other models may include

or exclude additional connectors. Refer to Section 2.3 for listings of monitors and their
connectors. All connectors are fully described in Section 5.4.

Figure 1-2: Typical Bottom Panel View

6 ©Copyright 2008 CyberResearch, Inc.