CyberPower Systems OP650 User Manual
User’s Manual
Office Series UPS
OP650
ADDITIONAL INSTALLATION TIPS CAN BE FOUND AT:
www.cyberpowersystems.com/FAQs.htm
TABLE OF CONTENTS
IMPORTANT SAFETY WARNINGS…………….……………………………………….………1
INSTALLING YOUR UPS SYSTEM…………………….………………………………….……2
- UNPACKING…… ………………………………………………………………..2
- HARDWARE INSTALLATION GUIDE…………………………………….……2
BASIC OPERATION…………………………………………...................................................2
- FRONT PANEL AND REAR PANEL DESCRIPTION....................................2
BATTERY REPLACEMENT AND STORAGE………………………………………….…...….4
TROUBLESHOOTING……………………………………………………….........................….6
TECHNICAL SPECIFICATIONS…………………………………………………….………..….7
DEFINITION FOR ILLUMINATED LED INDICATORS……………………………………..…8
LIMITED WARRANTY AND POWER CONTROL GUARANTEE……………………………9
Thank you for purchasing a CyberPower Systems Product. To enjoy all the features and
benefits of this Uninterruptible Power System (UPS), please read and follow all installation
and operation instructions completely. This UPS is designed to provide guaranteed power
protection for connected electronic equipment. The accompanying PowerPanel Plus™
software saves data, closes open applications and automatically shuts down your computer
system in an intelligent and orderly manner.
- BATTERY REPLACEMENT PROCEDURE……………………………...……4
Guaranteed Uninterruptible Power System
IMPORTANT SAFETY WARNINGS
OP650
This manual contains important instructions that should be followed during installation and
maintenance of the UPS and batteries. Please read and follow all instructions carefully
during installation and operation of the unit. Read this manual thoroughly before attempting
to unpack, install, or operate.
CAUTION!
AC outlet with fuse or circuit breaker protection. DO NOT plug unit into an outlet that is not
grounded.
CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT
EQUIPMENT!
applications. DO NOT use in any circumstance that
would affect operation or safety of any life support equipment, with any medical applications,
or patient care.
CAUTION!
input power is disconnected.
CAUTION!
humidity controlled indoor area, free of conductive contaminants. (Please see specifications
for acceptable temperature and humidity range).
CAUTION!
service the battery. No user serviceable parts inside, except for the battery.
CAUTION!
source before servicing the battery or installing a computer component.
CAUTION!
do not use with or near aquariums. Condensation from the aquarium can cause the unit to
short out.
(SA VE THESE INSTRUCTIONS)
UPS must be live parts inside can be energized by the battery, even when
CyberPower Systems does not sell products for life support or medical
The battery can energize hazardous live parts inside even when the AC
To prevent the risk of fire or electric shock, install in a temperature and
To reduce the risk of electric shock, do not remove the cover, except to
To avoid electrical shock, turn off the unit and unplug it from the AC power
DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire,
1
INST ALLING YOUR UPS SYSTEM
UNPACKING
Inspect the UPS upon receipt. The box should contain the following:
(1) UPS Unit; (1) User’s Manual for UPS; (1) Warranty Registration Card;
(1) PowerPanel Plus
(1) Serial Interface Cable (DB-9); (1) Serial-to-USB cable; (1) Telephone Cable
HARDWARE INSTALLATION GUIDE
1. Connect the equipment to your UPS outlets. Items such as copiers, laser printers,
vacuums, space heaters, or other large electrical devices should not be connected to
the UPS. Please assure that the total loads of your equipments must be less than the
maximum total power load of your UPS.
2. Connect your UPS power cord into a two-pole, three-wire
grounding receptacle only. Please avoid using extension
cords and adapter plugs. (To maintain optimal battery
charge, leave the UPS plugged in at all times.)
3. Press the UPS power button to turn it on. The “Power On” indicator will be illuminated in
“Green”.
4. Install your optional software and accessories. To use the software, simply connect the
enclosed serial interface cable to the serial port on the UPS and an open serial port on
the computer.
FRONT PANEL AND REAR PANEL DESCRIPTION
TM
Software Disk; (1) User’s Manual for PowerPanel PlusTM;
BASIC OPERA TIO N
2
Guaranteed Uninterruptible Power System
◆ Power Switch
Press the power button to turn the UPS ON or OFF
◆ Power On Indicator
This LED is illuminated when the utility condition is normal and
the UPS outlets are providing “clean power”, free of surges and
spikes
◆ Using Battery Indicator
This illuminates during utility failure, indicating that the battery is
supplying power to the battery-power supplied outlets.
◆ BOOST Indicator
This LED indicates that the UPS is operating in automatic
voltage regulation mode. When the led is flashed in rotation, it
indicates that the UPS unit boosts input voltage.
◆ Buck Indicator
This LED indicates that the UPS is operating in automatic
voltage regulation mode. When the led is illuminated
continuously, it indicates input over-voltage and the UPS unit
bucks the voltage.
◆ Battery Backup and Surge Protection Outlets
Provides three battery powered and surge protected outlets for
connected equipment to insure temporary uninterrupted
operation during a power failure and against surges and spikes.
◆ Surge Protection Outlets
◆
Wiring Fault Indicator
Provides three surge protected only outlets for connected
equipment against surges and spikes
This LED indicator will illuminate to warn the user that a wiring
problem exits with the AC outlet, such as bad ground, miss
ground or reversed wiring. If this is illuminated, the user is
advised to disconnect all electrical equipment from the outlet
and have an electrician check the outlet to insure proper wiring.
3
OP650
Loading...