CyberPower Systems CP-H420M User Manual

Quick Start Guide for USB 2.0 4 Port Hub
Model No. CP-H420P
This USB Hub makes the most of your computer and workspace by increasing the number of available USB ports. There has never been a more convenient way to expand your USB capacity
Table of Contents
Introduction
System Requirements
Package Contents
Specifications
Product Overview
Installation
Appendix A (Troubleshooting)
Appendix B (Radio Interference Statement)
Appendix C (Product Limited Liabilities Warranty)
Thank you for purchasing a product. To enjoy all the features and benefits
of this USB Hub, please read and follow all installation and operation instruction completely.
1
2
2
3
4
5
8
9
Introduction
USB(Universal Serial Bus) is currently the standard for most computers, notebooks and
peripherals. The USB connections allow the user to easily connect multiple devices. The
USB 2.0 4 Port Hub (Model. CP-H420P) provides additional ports to connect
up to 4 USB devices to a single USB port on your computer.
The Quick Start Guide contains easy instructions in order to show you how to set up and
start using your USB Hub
Package Contents
This package includes:
USB 2.0 4 Port Hub (Model CP-H420P)
AC Power Adapter
1.5m A-miniB USB cable
User Manual
System Requirements
Any PC or Macintosh computer with an available USB port and USB-compliant operating
system(Windows 98/98SE/2000/ME/XP, MacOS 8.6 or above, etc.)
Specifications
FUNCTION
USB Ports Downstream
Upstream
LEDs Power
Battery Discharge
Power Mode
Output Voltage(per port)
Output Currect(per port)
Operating Temperature
Storage Temperature
Humidity
Housing
Weight
Dimensions
SPECIFICATION
1
4
1(Blue)
1(Green)
Self-Powered
+5V DC
500mA(max)
5°C~40°C
-20°C~60°C
0~80%RH. Noncondensing
Plastic
46g
67.0 x 64.0 x 20.0 mm
Product Overview
Installation
This USB Hub is a plug-and-play device. Your computer will display the ADD NEW Hardware
Wizard after connecting the hub to your computer. Installation may be done whether your
computer is powered on or off. It is not necessary to restart your computer after installation.
1)Connect the A-miniB USB cable(include in this package) to the Upstream port on the USB
Hub, then connect the other end of the cable to an unused USB port on your computer.
2)Connect your USB devices to the Downstream ports on the USB Hub.
Product Overview - continued
1)Power Indicator – Blue LED will light when USB Hub is receiving power.
2)Downstream Ports – Connect your USB devices to these 4 ports.
3)Port Status Indicators – Green LEDs indicate port status and over corrent detection.
When a device is connected to one of the ports, the associated LED will light. If an over
current condition occurs, the LED for that port will turn off, indicating a problem with that
device.
4)Root(Upstream) Ports – Connect your computer to this port to provide a link between the
hub and devices.
5)AC Adapter Power Connection – Connect your ac power adapter here. This hub operates
in self-powered mode to ensure sufficient power is provided to connect USB devices.
Installation - continued
Self-Power the Hub:
Plug the DC power adapter into the jack,then plug the power adapter into a well outlet if
additional power is required for connected USB devices.
NOTE:
To maximize USB Hub’s performance, it is recommended to plug AC
power adapter while using
Appendix A
Appendix B
Troubleshooting
Problem Unit operates Erratically.
USB devices operate erratically or can’t be powered on.
Unit fails to operate at all.
Possible Cause Static electricity may cause the hub to behave erratically.
Connected USB devices may require too much power for bus-powered operatically Non-USB compliant operating system.
Action Reset the hub and AC power adapter by disconnecting it from your computer. Wait 5 seconds, then reconnect it. Connect the AC power adapter to the hub
Insure that your computer is fully USB
-compatible and a USB-compliant operating system is installed.(see System Requirements section)
Appendix C
Product Limited liabilities Warranty CyberPower warrantys this USB Hub (the Hub) that warranty period is 2 years after purchasing date, any product defect, problem and etc. Please contact your original purchasing dealer and retailer. They will provide you the service. If a defect results in product failure during its normal use, CyberPower’s sole responsibility is to repair or replace(at its sole option) the Hub.
To make a Limited Warranty claim:
1.Pack and ship the Hub to original purchasing dealer retailer.
2.Clearly indicate on the outside of the packaging that this is a WARRANTY RETURN;
3.Clearly include your name and address (a) on the outside packaging and (b) one photo copy of original invoice or receipt enclosed in the box with the Hub that is being returned
4.You MUST prepay all shipping costs and you are responsible for packaging and shipment.
Radio & TV interference Statement
This equipment has been tested and found to comply within the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequence energy and if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee, however, that interference will not occur in a
particular installation.
CyberPower Systems B.V. E-mail : sales@cyberpower-eu.com web: eu.cyberpowersystems.com Entire contents copyright©2005 CyberPower Systems, Inc. All rights reserved. Reproduction in whole or in part without permission is prohibited.
K01-H420P10
Contact Information:
You may also visit CyberPower on the Internet at eu.cyberpowersystems.com or send E-mail to sales@cyberpower-eu.com
Loading...