This USB Hub makes the most of your computer and workspace by increasing the
number of available USB ports. There has never been a more convenient way to
expand your USB capacity.
Thank you for purchasing a Cyber Power product. To enjoy all the features and benefits
of this USB Hub, please read and follow all installation and operation instructions
completely.
Introduction
USB (Universal Serial Bus) is currently the standard for most
computers, notebooks and peripherals. The USB connections allow
the user to easily connect multiple devices. The Cyber Power USB 4 Port Hub (Model. CP-H411) provides additional ports to connect up to
4 USB devices to a single USB port on your computer.
The Quick Start Guide contains easy instructions in order to show you
how to set up and start using your Cyber Power USB Hub.
1
System Requirements
Any PC or Macintosh computer with an available USB port and USBcompliant operating system (Windows 98/ 98SE/ 2000/ ME/ XP,
MacOS 8.6 or above, etc.)
Package Contents
This package includes:
!
USB 4-Port Hub (Model CP-H411)
!
User Manual
2
Specifications
3
Product Overview
3
1
Model CP-H411
2
4
3
2
4
Product Overview - continued
1) Power Indicator - Blue LED will light when USB Hub is receiving power.
2) Downstream Ports - Connect your USB devices to these 4 ports.
3) USB Plug (A type) - Connect the USB Plug to an unused USB port on your
computer to provide a link between the hub and devices.
4) AC Adapter Power Connection
To maximize USB Hub performance, it is recommended to plug Cyber Power AC power adapter (Model: CPSA0526; Output: 5V DC 2.6Amp)
into the power jack of this hub while using.
NOTE:
Cyber Power AC power adapter (sold separately) makes this hub to operate in self
power mode to ensure sufficient power is provided to connected USB devices.
's
5
Installation
This USB Hub is a plug-and-play device. Your computer will display the Add
New Hardware Wizard after connecting the hub to your computer. Installation
may be done whether your computer is powered on or off. It is not necessary to
restart your computer after installation.
1) Connect the USB plug to an unused USB port on your computer.
2) Connect your USB devices to the Downstream ports on the USB Hub.
6
Appendix A
Unit operates
erratically
USB devices
operate erratically or
can't be powered
on.
Unit fails to operate
at all.
ProblemPossible CauseA
Troubleshooting
ProblemPossible CauseAction
Static electricity may
cause the hub to
behave erratically.
Connected USB
devices may require
too much power for
bus-powered operation.
Non-USB compliant
operating system.
Reset the hub by
disconnecting it from
your computer. Wait 5
seconds, then
reconnect it.
Connect the CyberPower
AC power adapter to
the hub.
Insure that your
computer is fully USBcompatible and a USBcompliant operating
system is installed.
(see System
Requirements section)
7
Appendix B
Radio & TV Interference Statement
This equipment has been tested and found to comply within the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequence energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. There
is no guarantee, however, that interference will not occur in a particular
installation.
8
Appendix C
Lifetime Limited Warranty
Cyber Power warrants this USB Hub (the Hub ) to be free from defect in material or manufacture for its lifetime.
If a defect results in product failure during its normal use, Cyber Power's sole responsibility is to repair or
replace (at its sole option) the Hub.
The foregoing Limited Warranty is the consumer's sole and exclusive remedy and excludes any incidental or
consequential damages. Some States do not allow the exclusion or limitation of incidental and consequential
damages, so certain of the above limitations or exclusions may not apply to you (the Consumer). This limited
warranty gives the Consumer specific legal rights and the Consumer may have other rights, which vary from
State to State.
To make a Limited Warranty claim:
1. Pack and ship the Hub to Cyber Power at 5555 12th Ave E, Suite 110, Shakopee, MN 55379;
2. Clearly indicate on the outside of the packaging that this is a WARRANTY RETURN;
3. Clearly include your name and address (a) on the outside packaging and (b) on a sheet of paper enclosed in
the box with the Hub that is being returned; and
4. You MUST prepay all shipping costs and you are responsible for packaging and shipment.
Cyber Power will inspect and examine the Hub. If the Hub is defective in material or workmanship, Cyber
Power will repair or replace it and return it to you at Cyber Power's expense at the place you have indicated.
Contact Information:
Cyber Power, 5555 12th Ave E, Suite 110, Shakopee, MN 55379, (877) 297-6937 (toll free). Cyber Power is the
warrantor under this Limited Warranty. You may also visit Cyber Power on the Internet at
.www.cyberpowersystems.com
9
CyberPower Systems (USA), Inc.
5555 12th Avenue East, Suite 110, Shakopee, MN 55379, U.S.A.