CyberPower CP-MBC User Manual

Reliability. Quality. Value.

Mobile Power Pack User Guide

Checking the Charge Status

The charge status of PC- MBC is indicated by the green LED status indicator. If the green LED is flashing, this indicates that the power pack is being charged. See the table below for the level of battery status. Continue charging until the green LED lights up solid and does not flash. This indicates that the power pack is fully charged.

Model No. CP-MBC

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .2

Package Contents . . . . . . . . . . . . . . .. . . . . . . . . . . . .2

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . .. . . .3

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Product Components . . . . . . . . . . . . . . . . . . . . . . . . .5

Charging the CP-MBC . . . . . . . . . . . . . . . . . .. . . . . . .6

Powering Devices . . . . . . . . . . . . . . . . . . . .. . . . . . . . .8

Troubleshooting . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .10

Radio & TV Interference Statement . . . . . . . . . . . . . . .11

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Thank you for purchasing a CyberPower product. To enjoy all the features and benefits of this Mobile Power Pack, please read and follow all installation and operation instructions.

Green LED Status Indication

Light

Flashing 3 sec

Flashing 2 sec

Flashing Fast

Caution

1. Please charge your CP-MBC the first time for a full 8 hours before regular use.

2. When charging the CP-MBC using the AC Adapter or a PC, do not connect any devices to the type A USB power port. Powering a device while charging the internal battery will result in a longer charge time for the CP-MBC.

3. Do not charge CP-MBC through a USB hub. Other devices connected to the hub may reduce the available power and increase the time required to charge the CP-MBC.

During Charging

75 ~100%

50 ~75%

25 ~50%

Below 25%

Powering Device

Use an appropriate USB cable to power devices such as iPods®, MP3 players, mobile phones, PDAs and portable gaming systems. Connect the USB cable to the type A USB powering port on the CP-MBC and the other end of the cable to the device that you wish to power.

A Type Port

Turning On the CP-MBC

Press the power on/off button for 1 second. The orange LED will light up indicating that the power pack is ready to power a device. If the CP-MBC is not being used (charging or discharging) after 5 minutes, the orange LED will automatically turn off. The CP-MBC will switch to sleep mode. To turn the CP-

MBC back on, just press the power on/off button again until the orange LED lights up.

Introduction

CyberPower Mobile Power Pack (CP-MBC) is a rechargeable Power Pack that is designed for powering mobile devices, iPods®, MP3 players, mobile phones, PDAs and portable gaming systems via the USB Mini-B Cable. CP- MBC is an ideal travel mate and backup battery that supports and powers devices on the go.

Features

- Recessed power button prevents accidental start up.

- Auto-shutdown feature protects the CP-MBC from draining.

- High energy-density Lithium-polymer battery.

- Long lasting rechargeable battery with up to 500 cycles.

Package Contents

1. Mobile Power Pack ( CP-MBC)

2. 100-240 Volt AC to 5V USB Transformer

3. USB 2.0 Device Cable

4. User Manual

Safety Precautions

Before using the CP-MBC, please read the following warnings carefully. Use the product according to the procedures described in this manual. Failure to follow these safety

precautions may result in fire, explosion, electrical shock or other dangers.

1. Do not disassemble this product, or any of its parts.

2. Store between -4 to 140°F (-20 to 60°C).Operate between 32 to 113°F(0 to 45°C).

3. Do not immerse this product in water or other liquids, as such use may result in fire or electrical shock. If water or other liquids enter the battery interior, unplug the product immediately from any attached power source or device.

4. Do not use this product with wet hands. Moisture in or on this product may result in electrical shock.

5. Do not expose this product to direct flame or leave it in an over-heated condition, as the battery may explode.

6. Store this product in a cool and dry environment when not in use.

7. Do not puncture this product. Puncturing the battery may cause the release of harmful substances.

8. It is normal for the CP-MBC to become warm during charging.

9. Keep this product out of the reach of children. Ensure that all users read these warnings and instructions before using.

Prior to Use

NOTE: Charge the CP-MBC for a full eight (8) hours prior to using for the first time.

Checking the CP-MBC Power Status

The power status of the CP-MBC Power Pack's available power is indicated by the orange LED indicators. The level of available power is described in the following table:

Orange LED Status Indication

Light

Flashing 3 sec

Flashing 2 sec

Flashing Fast

LED off

Available Power

75 ~100%

50 ~75%

25 ~50%

Below 25%

Fully Depleted

Caution

When both orange & green LEDs light up, this indicates that the power consumption of the device is greater than 1.2A current. The CP-MBC is overloaded. To turn the CP-MBC off, press and hold the power on/off button for 2

seconds.

Troubleshooting

Problem

CP-MBC does not power the device.

CP-MBC does not charge.

Possible Cause

1. The CP-MBC may have switched to Auto Sleep Mode.

2. The power of device is over SPEC (5V, 1.2A).

3. The battery is out of power.

1. Incorrect connection between charger and CP- MBC product.

2. No power source from outlet.

Solution

1. Press the power on/off button for 1 second to wake the CP-MBC.

2. Check the power specification of the device before charging with the CP-MBC.

3. Charge the CP-MBC using one of the two methods that are described under "Charging the CP-MBC" in this user's manual.

1. Mini B port on the CPMBC is for charging.

2. Checking the wall outlet.

Specifications Radio & Interference Statement

Item

Input Voltage Range

Input Power Source

On Battery Output Voltage Range

On Battery Output Maximum Current

On PC USB Port Maximum Current

On AC Adapter Output Maximum Current

Capacity

Output Power

Powering Indication

Capacity Indication

Charge time

Size

Weight

Environmental

DC Input

DC Output

Product Components

Orange LED

Power indicator LED Power on/off indicator

Powering Port

Use the included USB cable to power your device.

Charge using included AC transformer or

5 Watt Maximum Continuous Power 6 Watt Peak Power - Short Duration

Power On/Off

Press the button momentarily to turn on or off the unit.

Specification

upstream USB port.

5V +/-5%

1.2A

500mA

6 Watt-hours

Orange LED

Recharges to 100% in 3.5 hours

Storage: -4 to 140°F (-20 to 60°C) Operation: 32 to 113°F(0 to 45°C)

Green LED

4.06 x 2.36 x 0.58 in

3.264 OZ

Green LED

Charge indicator LED

Mini B Charging Port

Connect the included AC transformer or USB cable to charge the battery.

This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant of Part 15 of the FCC rules. The limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee, however, that interference will not occur in a particular installation.

Warranty

CyberPower warrants this CP-MBC to be free from defect in material or manufacture for 1 year. If a defect results in product failure during its normal use, CyberPower's sole responsibility is to repair or replace (at its sole option) the CP-MBC. The foregoing 1 Year Limited Warranty is the consumer's sole and exclusive remedy and excludes any incidental or consequential damages. Some States do not allow the exclusion or limitation of incidental and consequential damages, so certain of the above limitations or exclusions may not apply to you (the Consumer). This 1 year limited warranty gives the Consumer specific legal rights and the Consumer may have other rights, which vary from State to State. To make a 1 year Limited Warranty claim:

1. Pack and ship the CP-MBC with a dated Proof- of-Purchase receipt to CyberPower at 4241 12th Ave E, Suite 400, Shakopee, MN 55379;

2. Clearly indicate on the outside of the packaging that this is a WARRANTY RETURN;

3. Clearly include your name and address on the outside packaging and on a sheet of paper enclosed in the box with the CP-MBC that is being returned.

4. You MUST prepay all shipping costs and you are responsible for packaging and shipment.

CyberPower will inspect and examine the CP-MBC. If the CP-MBC is defective in material or workmanship, CyberPower will repair or replace it and return it to you at

CyberPower’s expense at the place you have indicated.

Charging the CP-MBC

You can charge the CP-MBC using any of following methods: Option 1- Using the AC Power Adapter: Use the included AC power adapter to charge the CP-MBC. Plug the adapter into a wall outlet and connect the MiniB port to the CP-MBC. Option 2- Using Your Notebook or PC: Charge the CP-MBC through your notebook or desktop PC. Use the included USB 2.0 Device cable, connect mini-B port to the CP-MBC and connect A-type port to a Notebook or PC.

Option 1.

mini B Port

Option 2.

mini B Port

A Type Connector

Reliability. Quality. Value.

CyberPower Systems (USA), Inc. 4241 12th Avenue East, Suite 400, Shakopee, MN 55379, U.S.A.

TEL: (952) 403-9500 FAX: (952) 403-0009 Toll-Free: (877) 297-6937 E-mail: sales@cyberpowersystems.com Web: www.CPSww.com

K01-1110000-00