Page 1
POWER BANK
PRODUCT GUIDE
CP5000PEG
CP10000PEG
CP15000PEG
1
2 3
INTRODUCTION
SUGGESTED - PRIOR TO FIRST USE
CHARGING THE POWER BANK
The Power Bank (CP5000PEG/CP10000PEG/CP15000PEG) is
a high capacity rechargeable lithium polymer battery
designed for powering mobile devices such as phones,
MP3 players, tablets, and handheld gaming devices while
away from other power sources.
It is recommended that you charge your CP5000PEG
/CP10000PEG/CP15000PEG for 15 hours to insure a full
charge.
Charge the Power Bank by included charging cable. When
charging the Power Bank, the LED indicator will light up
automatically. Recharge the CP5000PEG/CP10000PEG/
CP15000PEG every 3 months when not in use to maintain
peak battery performance. The battery capacity may decline
after 300 charging cycles.
POWER
YOUR DEVICES
CHARGE THE
POWER BANK
To Micro USB Input PortTo USB Output Port
PRODUCT VIEW:
LED INDICATOR
• • • • 4 LEDs = 85~100% power
• • • • 3 LEDs = 60~85% power
• • • • 2 LEDs = 30~60% power
• • • • 1 LED = 10~30% power
Blinking LED = <10% power
1
4
3
2
ITEM
Power on/LED
Indicator Switch
LED Battery Life lndicator
Micro USB Input Port
USB Output Port 5V/
2.1A (Max.)
DESCRIPTION
Press the button
As the “LED INDICATOR”
table showing
5V/2.5A
5V/2.1A
5V/1A
No
1
2
3
4
5
Note: When the Power Bank is connected to the power, the
LED indicator will light, indicating the charging status.
3
1
2
5
4
CP5000PEG
CP10000PEG
CP15000PEG
1
2
3
4
5
SPECIFICATIONS
CP5000PEG CP10000PEG
CP15000PEG
Battery
Capacity
Rated Input
Rated Output
Fully Charging
Time
Dimensions
Weight
Environment
115*65*
12.4 mm
140.5*76.4*
14.6 mm
140.5*76.4*
20.4 mm
5000mAh 10000mAh 15000mAh
DC 5V 2.5A
DC 5V 2.1A DC 5V 2.1A (Max.)
~4 Hours ~9 Hours ~13 Hours
134 g 235 g
Storage: 14 to 122°F (-10 to 50°C)
Operation: 32 to 104°F (0 to 40°C)
333 g
MODEL
Page 2
TROUBLESHOOTING
Solution
Check the power
specication of the
device before charging
with the CP5000PEG/
CP10000PEG/
CP15000PEG.
Charge the Power
Bank.
Remove the device
causing the overload
and press the power
button to return to
normal mode.
Re-attach the USB
connector to the
socket.
Check that power is
provided.
Possible Cause
1. The device is
drawing too much
power.
2. The battery is out
of power.
3. The Power Bank is
overloaded.
1. Incorrect
connection
between charger
and Power Bank.
2. No power from the
source.
Problem
Power Bank
does not
power the
device
Power Bank
does not
recharge
SAFETY INFORMATION/CAUTION
Before using the Power Bank, please read the following
warnings carefully. Use the product according to the
procedures described in this manual. Failure to follow these
safety precautions may result in re, explosion, electrical
shock or other dangers.
1. Store between 14 to 122°F (-10 to 50°C). Operate between
32 to 104°F (0 to 40°C).
2. Do not immerse this product in water or other liquids, as
such use may result in re or electrical shock. If water or
other liquids enter the battery interior, unplug the
product immediately from any attached power source or
device.
3. Do not use this product with wet hands. Moisture in or on
this product may result in electrical shock.
4. Store this product in a cool and dry environment when
not in use.
5. Do not puncture this product. Puncturing the battery may
cause the release of harmful substances.
6. It is normal for the Power Bank to become warm during
charging.
7. Ensure that all users read these warnings and instructions
before using.
8. Please recycle Power Bank in accordance with local
environmental laws and regulations.
9. Do not dismantle, open or shred secondary cells or
batteries.
10. Do not expose cells or batteries to heat or re. Avoid
storage in direct sunlight.
11. Do not short-circuit a cell or a battery. Do not store cells or
batteries haphazardly in a box or drawer where they may
short-circuit each other or be short-circuited by other
metal objects.
12. Do not remove a cell or battery from its original
packaging until required for use.
13. Do not subject cells or batteries to mechanical shock.
14. In the event of a cell leaking, do not allow the liquid to
come in contact with the skin or eyes. If contact has been
made, wash the aected area with copious amounts of
water and seek medical advice.
15. Do not use any charger other than that specically
provided for use with the equipment.
16. Observe the plus (+) and minus (–) marks on the cell,
battery and equipment and ensure correct use.
17. Do not use any cell or battery which is not designed for
use with the equipment.
18. Do not mix cells of dierent manufacture, capacity, size or
type within a device.
19. Keep cells and batteries out of the reach of children.
20. Seek medical advice immediately if a cell or a battery has
been swallowed.
21. Always purchase the correct cell or battery for the
equipment.
22. Keep cells and batteries clean and dry.
23. Wipe the cell or battery terminals with a clean dry cloth if
they become dirty.
24. Secondary cells and batteries need to be charged before
use. Always use the correct charger and refer to the
manufacturer’s instructions or equipment manual for
proper charging instructions.
25. Do not leave a battery on prolonged charge when not in
use.
26. After extended periods of storage, it may be necessary to
charge and discharge the cells or batteries several times
to obtain maximum performance.
27. Secondary cells and batteries give their best performance
when they are operated at normal room temperature
(20 °C ± 5 °C).
28. Retain the original product literature for future reference.
29. Use only the cell or battery in the application for which it
was intended.
30. When possible, remove the battery from the equipment
when not in use.
31. Dispose of properly.
According to the Instructions.
This product is safe for regular use under normal conditions.
As with any device using electrical power, some situations
may be unsafe and injuries or damages could result. To
minimize or avoid unsafe conditions, please read and follow
the instructions before using.
CyberPower Systems, Inc.
www.cyberpower.com
K01-0000503-00
4 5
6 7
Loading...