CyberPower 880 User Manual

This warranty contains the sole warranty of

CyberPower, there are no other warranties,

expressed or, except as required by law, implied,

including the implied warranty or condition of

quality, merchantability or fitness for particular

purpose, and such implied warranties, if any, are

limited in duration to the term of this warranty.

Some states do not allow limitations on how long an

implied warranty lasts, so the above limitations may not

apply to you.

In no event shall CyberPower be liable for

incidental, special, direct, indirect, consequential or

multiple damages such as, but not limited to, lost

business or profits arising out of sale or use of any

CyberPower Surge Suppressor, lost data and/or

software, even if advised of the possibility of such

damages. This warranty gives you specific legal rights

damages.

and you may also have other rights which may vary

from state to state. Some states do not allow the

exclusion or limitation of incidental or consequential

damage, so the above limitations may not apply to you.

This warranty is valid for the original purchaser of the

product. All damage claims against the product must be

made within 15 days from the date of the occurrence

and must be accompanied by receipt for the Surge

Suppressor and the damaged equipment or the

warranty is void.

Valid in the USA and Canada.

To file a claim against the CyberPower Connected

Equipment Warranty, you must do the following:

1) Contact CyberPower at 5555 12th Ave. East, Suite

110, Shakopee, MN 55379, ATTN: Technical Support

within 15 days of the occurrence. Be prepared to

provide the following information:

2) Your CyberPower Technical Service Representative

will then instruct you on how to forward your equipment,

receipt, and the CyberPower Surge Suppressor in use

during the “occurrence” and how to proceed with your

claim.

CyberPower Systems (USA), Inc. 5555 12th Ave East, Suite 110 Shakopee, MN 55379 Phone: (952) 403-9500 Fax: (952)403-0009 www.cyberpowersystems.com

This warranty gives you specific legal rights

a) The part number of the CyberPower

Surge Suppressor;

b) The equipment that was connected to the

Surge Suppressor;

c) The equipment that was damaged during the

occurrence and the extent of the damage;

d) The date of the occurrence; and

e) Date and place of purchase of your Surge

Suppressor.

Connect the coaxial cable from your cable / antenna / dish source to one of the surge protector’s video connectors marked “IN”. With another section of coaxial cable, connect the surge protector’s corresponding video connector marked “OUT” to the appropriate jack on your tv/vcr/other device.

Connect a modular phone cord from the incoming phone line to the surge protector phone jack marked “IN”. Connect a second modular phone cord from the surge protector phone jack marked “OUT” to your phone/fax/modem line in.

Lifetime Limited Product Warranty

Eight Outlet Computer Grade Surge Suppressor

With Audio/Video, Network and Phone/Fax Protection

DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT.

2200

WARNING:

DO NOT USE WITH ANY AQUARIUM EQUIPMENT.

Joules

Model #880

LIMITATION: THIS WARRANTY DOES NOT COVER

1. As to CyberPower Products, this warranty does not

As to CyberPower Products, this warranty does not

cover or apply to : Misuse; modification; operation or

storage damage or deterioration; improper operation or

maintenance; use with items or equipment not designed or

intended for use with the product.

2. As to the connected equipment, this warranty covers

As to the connected equipment, this warranty covers

only damage within the specific terms of the Connected

Equipment Guarantee to Connected Equipment (and only

up to the applicable aggregate ceiling amount). The

CyberPower Limited Warranty does not cover damage to

Connected Equipment or apply if the product has been

operated out of compliance with the instructions and

manuals of its manufacturer/vendor.

This warranty does not apply unless the customer:

1. Has properly connected the Product and the

Connected Equipment to properly wired and grounded

outlets/power supplies (including compliance with

electrical and safety codes of the most current National

Electrical Code ANSI/NFPA 70), without the use of any

adapters, extension cords, or other connectors.

2. Has provided a suitable and proper environment for

Has provided a suitable and proper environment for

use and installation of the Product and Connected

Equipment.

3. Has properly installed and operated the CyberPower

Has properly installed and operated the CyberPower

Surge Suppressor and the Connected Equipment.

CyberPower Connected Equipment Warranty

CyberPower warrants to the original purchaser of any

CyberPower Surge Suppressor for the life of the product

that the surge suppressor shall be free of defects in

assembly, material, or workmanship, and will repair or

replace, at its option, any defective product free of charge.

This connected Equipment Warranty is a Limited

Warranty, subject to the limitations and exclusions set

forth herein.

CyberPower Systems will repair or replace, at its

option, any equipment which is damaged by transient

voltage surge/spike or lightning strike (an “Occurrence”),

while properly connected through a CyberPower Surge

Suppressor to a properly wired AC power line with

protective ground and telephone line properly connected.

Once CyberPower has determined that you are entitled

to compensation, CyberPower will, at its option, pay you

the present fair market value of the damaged equipment,

or pay for the cost of the repair, up to the maximum

amount set forth for your Surge Suppressor Model, or

send to you the equivalent replacement equipment. The

maximum amount of the warranty for your Surge

Suppressor is shown on the product package, or can be

found on CyberPower’s website at

www.cyberpowersystems.com.

The fair market value of the equipment shall be the

current value of the equipment specified in the most

recent edition of Orion Blue Book, by Orion Research

Corporation, Roger Rohrs Publisher, or a valuation as

determined by CyberPower at CyberPower’s

discretion.

CyberPower reserves the right to inspect the

damaged CyberPower Surge Suppressor, the

damaged equipment, and the site where the damage

occurred. All costs of shipping the CyberPower Surge

Suppressor and the damaged equipment to and from

CyberPower for inspection shall be borne solely by the

purchaser. CyberPower reserves the right to negotiate

the cost and facility at which any repairs will take place,

and CyberPower must be notified and approve of any

repair facility before any connected equipment is

serviced. Any repair or modification of the Connected

Equipment or Surge Suppressor by a facility or entity

not approved by CyberPower voids the warranty. If

CyberPower determines, in its sole discretion, that it is

impractical to ship the damaged equipment to

CyberPower, CyberPower may designate, in its sole

discretion, an equipment repair facility to inspect and

estimate the cost to repair such equipment. The cost,

if any, of shipping the equipment to and from such a

repair facility and of such estimate shall be borne solely

by the purchaser. Damaged equipment must remain

available for inspection until the claim is finalized.

Whenever claims are settled, CyberPower reserves the

right to be subrogated under any existing insurance

policies the claimant may have.

Standard CyberPower surge protectors are

designed to eliminate disrupting and damaging effects

of momentary (less than 1ms) voltage spikes or

impulses from lightning or other power transients. If it

can be shown that a voltage spike lasting longer than

1ms has occurred, the Occurrence will be deemed

outside the rated capabilities of the surge suppressor

and the warranty is void.

All above warranties are null and void if:

1. The CyberPower Surge Suppressor in use during

The CyberPower Surge Suppressor in use during

the occurrence is not provided to CyberPower for

inspection upon CyberPower’s request at the sole

expense of the purchaser;

2. CyberPower determines that the CyberPower Surge

CyberPower determines that the CyberPower Surge

Suppressor has been improperly installed, altered in

any way, or tampered with;

3. CyberPower determines that the damage did not

CyberPower determines that the damage did not

result from the occurrence or that no occurrence in fact

took place.

4. CyberPower determines that repair or replacement

CyberPower determines that repair or replacement

of the damaged equipment is covered under

manufacturers warranty or any applicable extended

warranties; or

5. CyberPower determines that the connected

equipment was not used under normal operating

conditions or in accordance with any labels or

instructions.

All CyberPower Surge Suppressors must be

connected directly into the power source and

must not be “daisy-chained” together in serial

fashion with other power strips, UPS, grounding

adapters, other surge products or extension

cords. Any such installation voids the warranty.

The CyberPower Connected Equipment Warranty only

protects against damage to properly connected

equipment where CyberPower has determined, in its

sole discretion, that the Surge Suppressor did not

function properly because it had defects in assembly,

materials, or workmanship, causing it to operate

outside design specifications, and the Surge

Suppressor shows clear signs of damage, and the

damage resulted from the Occurrence. The

Connected Equipment Warranty does not protect

against acts of God (other than lightning) such as, but

not limited to, flood, earthquake, war, vandalism, theft,

normal-use wear and tear, erosion, depletion,

obsolescence, abuse, damage due to low voltage

disturbances (i.e. brownouts, sags, or power outages),

or system modification or alteration.

DO NOT USE FOR MEDICAL OR LIFE SUPPORT

EQUIPMENT OR OTHER HIGH RISK ACTIVITIES.

CyberPower does not sell products for use in high-risk

activities. CyberPower Surge Suppressors are not

designed for use in hazardous environments requiring

fail-safe performance, including the operation of

nuclear facilities, aircraft navigation or

communications systems, air traffic control, weapons

systems, life support or medical applications or for use

in any circumstance in which the failure of the product

could lead directly to death, personal injury, or severe

physical or property damage, or that would affect

operation or safety of any medical or life support

device (collectively, “High Risk Activities”).

CyberPower expressly disclaims any express or

implied warranty of fitness for High Risk Activities.

CyberPower does not authorize use of any of its

products in High Risk Activities. ANY SUCH USE IS

IMPROPER AND IS A MISUSE OF CYBERPOWER

PRODUCTS.