CyberData Corporation
4-Port PoweredUSB 2.0 & RS232
External Hub
The CyberData PoweredUSB and RS-232
Hub enables PoweredUSB connectivity in a
standard PC configuration. This hub
solution also provides legacy serial device
connectivity via two RS232 ports allowing
you to use existing RS-232 devices until
they are ready for migration.
CyberData's hub solution is the centerpiece
of a simple migration strategy for your entire
POS environment.
Translation Technology
CyberData's USB 2.0 translation technology
allows each PoweredUSB port to
communicate to the host PC at 2.0 speeds,
even if the attached device is only USB 1.1
compliant.
Features
Dell Retail Integrator compatible
Adds 2 Full-Featured RS232 ports
Adds 4 PoweredUSB ports
Translation convertor on all USB ports
One +24 volt at 2.3A
Three +12 volt at 1.5A each
Short circuit and overcurrent protected
Designed to support multi-function
printer power requirements
Peripheral power control by stand-by/wake
commands
External LED to show USB port status
Two year warranty
Compatibility
IBM PC Windows 98SE, 2000, & XP compatible.
Apple Computer & Linux also supported.
USB Standard 2.0 is fully supported.
External Power Supply
24V, 120W power supply included.
PoweredUSB & RS232 External Hub Specifications
PoweredUSB Ports 4
PoweredUSB Power Output*
(Standard)
RS232 Ports
External LEDs
Power Input 24VDC
Regulatory Compliance
Warranty
*All ports support standard "A" type +5V USB connection.
1 @ 24V 2.3A
3 @ 12V 1.5A each
2 DB9M with power option
Power, link & status
FCC Class B, UL 60950-1, CE
2 year limited
010845 Part Number
CyberData Corporation Innovative Concepts in Peripheral Connectivity.
930160A
Typical Installation
4-Port PoweredUSB 2.0 & RS232
External Hub
PC Host
Scanner
RS232 Signature Capture Pad
+12V +24V
Display
Printer
Host Connector
The Host connector is a standard USB "A" to
"B" type cable. Maximum length is 5 meters
(16.5 feet) with good quality cable.
Caution: Do not connect both P1 & P2 simultaneously
COM-B COM-A
Front
Serial Port Specifications (DB-9 Male)
Full Duplex TxD / RxD
Full Modem Control (RTS, CTS, DTR, DSR, DCD and RI)
Data Bits: 5, 6, 7 and 8
Parity: Odd/Even or None
Stop Bits: 1, 1.5 and 2 Stop Bits Support
Break Character Support
Parity and Frame Error Support
512 Byte Bi-Directional Data Buffer
Supports Remote Wake-up from Modem Signal
Standby Low Power Mode
Standard Baud Rates: 75bps up to 230.4Kbps
Pin# 9 is voltage configurable with overcurrent protection
License note:
The Powered-USB controller board contains specific technology covered by a patent held by IBM Corporation. CyberData has obtained a license from IBM that
permits CyberData Corporation, among other things, to make or sell products that incorporate this technology. The license also permits these products to be
resold by an entity after they have been initially sold by CyberData.
CyberData high quality 2.0 compliant
PoweredUSB cables
http://www.cyberdata.net/products/poweredus
b/pusbcables.html
DB-9M Pinout
Signal Pin#
-DCD
1
2
RXD
3
TXD
4
-DTR
5
GND
6
-DSR
7
-RTS
8
-CTS
9
-RI or +5V, +12V, +24V
Back
CyberData Corporation
CyberData Corporation 2555 Garden Road Monterey, California 93940
(831) 373-2601 (831) 373-4193 www.cyberdata.net
Loading...