The IP Endpoint Company
(1) 0.5-inch EMT Conduit
(3)#8 x 1.25-inch PanHead Phillips(4) #6 x 1.25-inch Sheet Metal Screw
(1) 0.5-inch EMT Set Screw Connector
(4)Size 6 Plastic Anchor
Machine Screw (Mounting Screw)
Comes with the Ceiling Speaker
Accessory Kit
Accessory Kit
Not Provided
To install the Conduit Speaker Mount:
1. Use the template to mark the hole locations on the ceiling.
2. Drill holes on the ceiling.
3. Insert the size #6 plastic anchor into the pre-drilled holes.
4. Line up the mounting adapter (part #611056B and install the #6 sheet metal screws.
5. Tighten the sheet metal screws to secure the mounting adapter.
6. Line up the ceiling speaker assembly to the mounting adapter.
7. Install the size #8 Pan Head Phillips Machine Screws (mounting screw).
8. Tighten the mounting screw to secure the ceiling speaker to the mounting adapter.
Installing the Conduit Speaker Mount
Sales: (831) 373-2601 ext. 334
Support: 831-373-2601 ext. 333
Web: http://www.cyberdata.net/support/contactsupportvoip.html
RMA Dept: (831) 373-2601 ext. 136
Email: RMA@CyberData.net
RMA Status: http://www.cyberdata.net/support/rmastatus.html
Warranty and RMA information is available at:
Web: http://www.cyberdata.net/support/warranty/index.html
Corporate Headquarters
CyberData Corporation
3 Justin Court
Monterey, CA 93940, USA
Phone: 831-373-2601
Fax: 831-373-4193
www.CyberData.net
Pry & Remove
Knockout (KO)
1/2" Set Screw
Connector
1/2" Conduit
Nut,
Part of
1/2" Set Screw
Connector
Network Cable
(KO)
RJ-45
Connector
Terminate after
Network Cable
Pass Through
1/2" Set Screw Connector
(KO)
611056B
Installation Quick Reference
Conduit Speaker Mount
011039
The Conduit Speaker Mount is an adapter that is built for a CyberData Ceiling speaker.
Parts
Network Cable
Tighten Screw
to Secure
1/2" Conduit
011021B, 011022A
011127A (As Shown)
or
(KO)
Sheet Metal Screw
& Plastic Anchor
(4 Pieces Each)
Accessory Kit
121001A
Mounting Screw
(3 Pieces)
Comes with
Accessory Kit
071006A
Procedure
Contacting CyberData
Quick Reference 930365C © 2011, CyberData Corporation, ALL RIGHTS RESERVED.© 2011, CyberData Corporation, ALL RIGHTS RESERVED. 930365C Quick Reference
Mounting Template
5.654 [143.6]
KO
Ø0.156 [Ø4.0]
(4 PLCS)
KO
DIRECTIONS OF KO
DIRECTIONS OF KO
5.653 [143.6]
KO
KO
Loading...