CyberData 011113 Installation Quick Reference

Installation Quick Reference

VoIP Indoor Intercom with Keypad

SiP Compliant

Quick Reference 930225G © 2011, CyberData Corpora tion, ALL RIGHTS RESERVED© 2011, CyberDa ta Corporation, ALL RIGH TS RESERVED 930225G Quick Reference

011113*, RAL 9003, Signal White

*Replaces the 011078 number.

The IP Endpoint Company

Gang Box Mounting Options

Contacting CyberData

611469B

Single Gang or 2 Gang Box

Can Be Rotated

to Mount on Either Sides

(Not Provided)

Drywall or Wall Cutout

(4 Pieces)

Machine Screw

Mounting Screw

for Gang Box

(4 Pieces)

Warranty

CyberData warrants its product agains t defects in material or workmanship
for a period of two years from the dat e of purchase. Should the product fail
within the warranty period, CyberData will repair or replace the product free
of charge. This warranty includes all pa rts and labor.

Should the product fail out-of-warranty, a flat rate repair charge of one half
of the purchase price of the product wil l be assessed. Repairs that are in
warranty but are damaged by improp er modifications or abuse, will be
charged at the out-of-warranty rate. Products shipped to CyberData, both in
and out-of-warranty, are shipped at the expense of the customer. Shipping
charges for repaired products shipped back to the customer by CyberData,
will be paid by CyberData.

CyberData shall not under any circu mstances be liable to any person for
any special, incidental, indirect or consequential damages, including
without limitation, damages resulting fr om use or malfunction of the
products, loss of profits or revenues or costs of replacement goods, even if
CyberData is informed in advance of the possibility of such damages.

For product service, contact the Returned Materials Authorization (RMA)
department. A product will not be accepted for return without an approved
RMA number. Send the product, in its o riginal package, to: CyberData Cor­poration, 2555 Garden Road, Monter ey, CA 93940, Attention: RMA “your
RMA number”

The most recent warranty information i s available at:
Web: http://www.cyberdata.net/support/warranty/index.html

Corporate Headquarters

CyberData Corporation
3 Justin Court
Monterey, CA 93940, USA

Phone: [phone]
Fax: [phone]
www.CyberData.net

Sales: [phone] ext. 334

Support: 831-373-2601 ext. 333
Web: http://www.cyberdata.net/support/contactsupportvoip.html

RMA Dept: [phone] ext. 136
Email: [e-mail]
RMA Status: http://www.cyberdata.net/support/rmastatus.html

Typical System Installation

Getting Started

• Download the VoIP Indoor Intercom with Keypad Operations Guide PDF file from the Documents page at:

http://www.cyberdata.net/products/voip/digitalanalog/in tercomkeypad/docs.html

• Create a plan for the locations of your Intercoms.

• Prior to installation, consult local building and electrical code requirements.

• WARNING: This enclosure is not rated for any AC voltages

!

Intercom Parts

Parameter Factory Default Setting

IP Addressing DHCP

IP Address

a

10.10.10.10

Web Access Username admin

Web Access Password admin

Subnet Mask

a

255.0.0.0

Default Gateway

a

10.0.0.1

a. Default if there is not a DHCP server present.

Door Strike

VoIP Intercoms with Keypad

IP Phone

IP PBX Server

Generic PoE Switch

123 456

(1) Intercom Assembly

(4)#6 x 0.75-inch Sheet Metal Screw

(1) Wall Mounting Kit

(4) #6 Plastic anchor (4) #6 x 3/8-inch Pan Head

Phillips Machine Screw*

(1) Gang Box Mounting Kit

* Only two screws are needed
for a single gang box.

The CyberData SIP-enabled VoIP Indoor Intercom with Keypad is a Power-over-Ethernet (PoE 802.3af) and Voice-over-IP
(VoIP) two-way communications device that easily connects into existing local area networks (LANs) with a single cable
connection.

© 2011, CyberD ata Corporation, ALL RIG HTS RESERVED 930225G Quick Reference Quick Referenc e 930225G © 2011, Cyb erData Corporation, ALL RIGHTS RESERVED

RTFM Switch

Wall Mounting Options

RTFM

When the device is operational and linked to a
network, you can use the Reset Test Function
Management (RTFM) switch (see picture) to
announce the device’s IP address or restore the
device to the factory default settings.

To announce the device’s current IP address:

• Press and release the RTFM switch within a
five second window.

Note The device will use DHCP to obtain the

new IP address (DHCP-assigned
address or default to 10.10.10.10 if a
DHCP server is not present).

To restore the device to factory default settings:

• Press and hold the RTFM switch for longer
than five seconds.

Backplate

Can Be Rotated

Machine Screw

(4 Pieces)

to Mount on Either Sides

(4 Places)

Pre-Drilled Hole

Hole in Wall

(for Network Cable)

Plastic Anchor (4 Pieces Each)

Sheet Metal Screw &

Dimensions

Terminal Block Connections

6.5 [165]

DIMENSIONS ARE IN INCHES [MILLIMETER]

4.5 [115]

1.6 [40]

Alternate Power Input:
1 = +12 to +24 VDC at 500 mA
2 = Power Ground

Relay Contact:
(2A at 30 VDC or 0.4A at 125 VAC

3 = Normally Open Common
4 = Normally Open Contact
5 = Door Sense Input
6 = Door Sense Ground Reference

J3

Terminal Block

Wire in,

3

4

up to 16 AWG

accept wire range

for continuous loads)

123456

Relay Contact:
(1A at 30 VDC for continuous loads)
3 = Normally Open Common
4 = Normally Open Contact
5 = Door Sense Input
6 = Door Sense Ground Reference

2 = Power Ground

1 = +12 to +24 VDC at 1000mA (500mA minimum)

34

Alternate Power Input:

Wire in,
accepts 16 AWG gauge wire