CyberBank CB-2460 Users Manual

Download

3. If you want to add this page to a new folder other than Favorite, tap New Folder.

4. Tap New Folder and enter a new name for a new folder. Then tap OK.

Managing your Favorites folder

Tap

Manage Favorites

on the

Favorites

menu.

You can add, rename, move and delete folder.

4) Web Page Offline

By tapping

to while you were online. This Web page does not show you the updated Web sites since

the last connection.

If you select

run Internet Explorer in an online state, tap

more.

Work Offline

on the

File

menu, you can see the last Web page you connected

, Internet Explorer will always start in the offline mode. To

Work Offline

on the

File

menu once

Internet Explorer & Inbox Page 5-3

II. Inbox

You can send and receive mail messages as follows:



ActiveSync folder that helps you to synchronize data between your desktop and

device.



Mail service account that you can make for directly connecting to ISP’s network.

You can download mail messages using this mail service account through LAN

card that you have to purchase optionally.

(1) Mail message Synchronization through ActiveSync

1) Microsoft ActiveSync Settings for Inbox

Tap Inbox ( ) icon.

First, put your device on cradle and synchronize mail message through Microsoft

ActiveSync. At this time, select Inbox in establishing a partnership.

Page 5-4 Chapter 5

Select Inbox and tap the Settings button.

Tap OK and synchronize mail messages between desktop and the ActiveSync folder of

your device.

: Mail message with no attachments, : Mail message with attachments.

2) Open mail message in Inbox

Double-tap mail message you want to open.

If you want to reply to, reply all, forward and delete this mail message, tap the reply to

(

), reply all ( ), forward ( ) and delete ( ) icon.

Internet Explorer & Inbox Page 5-5

3) Make a new mail message

If you want to make a new mail message, tap New from the Compose menu or tap the

New Message (

) icon.

Enter Recipient, Cc, Title and content.

Recipients



Enter the recipient’ s mail address directly or tap the Contacts ( ) icon to

select the mail address from the list.(for more information, see the Add mail

address to Contacts.)



If recipients is more than 2 persons, semicolon(;) will be put between mail

address.

If you want to attach files, select the File menu, point to Attachments and Add

Attachments or tap the Add Attachments (

) button. The attachments will be shown on

the bottom of screen.

Tap the Send (

) button to send your mail message.

If you want to leave the copy of the mail message you have sent before, select the

Service menu, Options, the Compose tab and select the Save copy to Outbox.

4) Add mail address to Contacts



Open the mail message of the Inbox folder and select the Add mail address to

Contacts from the Compose menu.

Page 5-6 Chapter 5



Select the Add to mail address to e-mail client of the Tools menu of the Contacts

program.

Select a contact you want or select the Select All button to select all contacts and tap OK.

5) Make a new folder, rename and delete folder

1. Select the folder under which you want to make a new folder on the explorer pane

located on the left side.

2. Select the File menu, Folder and New Folder, and enter a name of a folder and tap

OK.

3. If you want to rename it, select a folder and point to Folder of the File menu and

select Rename. Then enter a new name.

You can not rename the Inbox, Sent, Outbox, Deleted folder provided from the

ActiveSync folder.

4. Select the folder you want to delete, point to Folder of the File menu and select.

You can not delete the Inbox, Sent, Outbox, Deleted folder provided from the

ActiveSync folder.

6) Move mail messages

Allow you to move mail messages in a folder to another folder.

1. Select a mail message to move. (When you select more than one message, tap shift

first and select another message.)

2. Select Move to of the File menu.

Internet Explorer & Inbox Page 5-7

3. Select the folder you want to move mail messages and tap OK.

(2) Making a new Local Account

Select the Inbox icon on your device.

For more detailed information on POP3/IMAP4 server name, SMTP Host name,

user name and password, ask your ISP or network administrator.

Some mail services restrict sending/receiving mail messages through a network

outside according to company security policies, or do not support POP3 for some

Web-based mail messages. First, ask your ISP or network administrator.

Select Options of the Service menu and tap Add button.

Example: *****.cb.co.kr

Example: Steve

Remember your password and select this option.

Select IMAP4 or POP3 and tap

network administrator. Let us take a POP3 example here.)

Fill out each corresponding item and tap Next

Select options you need and tap Next.

. (For more detailed information, ask your ISP or

SMTP Host name

Page 5-8 Chapter 5

When completed, tap Finish.

Tap OK to finish all settings.

Insert the wireless or wired LAN card (you have to purchase it optionally.) into CF card slot and see

the corresponding icon on the taskbar.

Wired LAN card

: ,

wireless LAN card

: )

(

Tap the connect (

) icon to download the Inbox folder of the Local Folder from mail

server.

You can add new folders under only the Inbox, Sent and Outbox of the Local

Folder you have created.

1) Open mail message

1. Tap the Connect ( ) button or Send/Receive ( ) button to make a connection to mail server.

2. Mail messages will be downloaded to the Inbox folder of your Local Folder from mail

server.

The Sent, Outbox and Deleted folder of your Local Folder will not be downloaded

from mail server.

Internet Explorer & Inbox Page 5-9

3. When finished, tap the Connect ( ) button again to disconnect.

4. Double-tap the mail message or select Open of the File menu.

For more detailed information on the Local Folder, see mail message

synchronization of the ActiveSync folder in the first half of this chapter.

Page 5-10 Chapter 5

APPTTEE

MMiiccrroossoofftt PPrrooggrraammss

I. Media Player

Use Microsoft Windows Media Player to listen to digital audio and video files, such as

songs or movie clips. Media Player supports sound file recorded in Windows Media and

MP3 formats.

To turn off the display so that you can save power(the LCD-Off mode), press

and hold down(2 or 3 seconds) the power button while listening to music on your

device. Press the power button again to turn on the display. The Recording and

Alarm Status LED will flash.

1. Play button

2. Stop button

3. Previous track

4. Next track

5. Mute button

6. Volume slider

7. Progress slider

①

③

 To start Windows Media Player

1. Copy Windows Media files you want to the My Documents folder using Microsoft

2. Select Open of the File menu.

Microsoft Programs Page 6-1

②

ActiveSync. (Also you can use CF or SD card.)

⑤

④

⑦

⑥

Upper folder

New folder

3. Select the Browse button to find files you want.

Simple

Detail

4. Select the file you want and tap OK.

5. Tap OK again.

 Make a Playlist

1. Select Playlists of the File menu.

2. Select Organize Playlists of the Local Content menu.

3. Tap the New button to make a new playlist and tap OK.

Page 6-2 Chapter 6

Add

Delete

4. Select the files you want and tap OK.

Properties

Play

Move up/down

 To make the Favorites

When you want the current music added to the Favorites, point to Favorites of the File

menu and select Add to Favorites.

Add button

Added music files

If you want to organize Favorites easily, point to Favorites of the File menu and select

Organize Favorites.

Select the Add button to add new music to Favorites.

Microsoft Programs Page 6-3

Select the music you want and tap OK.

 Set up Options

Select Options of the View menu.

The same with selecting Repeat of the Playback menu.

Page 6-4 Chapter 6

II. MSN Messenger

MSN Messenger is an instant messaging program that lets you see who is online, send

and receive instant messages and have instant message conversations with groups of

contacts.

Insert the wireless or wired LAN card (you have to purchase it optionally.) into CF card slot and check

the corresponding icon on the taskbar.

(

Wired LAN card

: ,

wireless LAN card

: ) After that,

select the MSN Messenger (

) icon.

Also you need an account from your ISP. In addition, you must have a Microsoft Passport

account or a Microsoft Exchange e-mail account. You must have a Passport to use MSN

Messenger Service. If you have a Hotmail

or MSN account, you already have a Passport.

Once you have obtained either a Microsoft Passport or a Microsoft Exchange account,

you are ready to set up your account.

Microsoft Hotmail e-mail address at

http://www.passport.com

http://www.hotmail.com

. Get a free

(1) To set up an account and sign in

1. Select the MSN Messenger icon. When you use this program for the first time.

Microsoft Programs Page 6-5

Select the next button.

If you don’t have an

www.passport.com currently, selec

the Register Passport account.

Select the next button.

Enter the address o

www.passport.com

or www.hotmail.com.

Enter password.

Select the next button.

2. When you finish setting up an account, it automatically signs in.

Select the OK button.

Select the Finish button.

Page 6-6 Chapter 6

Tap OK to have the next screen displayed.

This is a messenger name used in your desktop.

These are the users that are on line currently.

4. If you want to change the existing messenger nickname used on your desktop, select

Nickname (Online)

displayed on your screen. Select Personal settings from a pop-

up menu or select Options of the Tools menu.

Enter the messenger nickname.

(2) To use MSN Messenger

1. When you want to communicate with someone online on your Messenger screen,

double-tap the nickname you want to communicate with or select the nickname from

Send Instant Messenger.

Select the Chat button to have the right side of scree displayed.

Enter the instant messag and tap the Send button.

Enter the voice chat message.

Microsoft Programs Page 6-7

2. Enter the instant message and tap the Send button. Then your party will see your

message.

(3) Change your status

Select Status of the File menu.

(Online/Busy/Be right back/Away/On the phone/Out to lunch/Appear Offline)

The list of your status appears on your device and your party’s device.

This is the screen displayed on my device when my party selects the On

the Phone status of the File menu.

(4) Set up Options

Select Options of the Tools menu.

Enter the messenger nickname.

Tap this button to block you parties that are used to communicate with you.

Page 6-8 Chapter 6

It is recommended that you select .NET passport account.

Microsoft Programs Page 6-9

III. Remote Desktop Connection

Using Remote Desktop Connection, first log in the Windows Terminal Server and you can

use all programs that are installed on your server. (Windows 2000 version or later should

be installed on your server.) For example, you can use the Window Word program instead

of Microsoft WordPad.

Insert the wireless or wired LAN card (you have to purchase it optionally.) into CF card slot and check

(

the corresponding icon on the taskbar.

Wired LAN card

: ,

wireless LAN card

: ) After that,

select the Remote Desktop Connection (

Enter user’s server name or IP address. To set up preference, select the

options button

) icon.

Enter user’s server name or IP address.

Enter user name and password.

Select the Connect button to automatically connect to server.

Enter user password.

Page 6-10 Chapter 6

Enter password again and tap OK. Then it automatically connects to server.

To close your task in your server, tap the Start button and select Exit system.

It is recommended that you select Log Off. I you select System off, your server will be shut down.

Microsoft Programs Page 6-11

IV. Terminal Emulator

Let’s take an example of connection to network terminal using wired modem. (For more

detailed information on settings, ask your ISP administrator.)

Insert the wired LAN card (you have to purchase it optionally.) into CF card slot and check the

corresponding icon on the taskbar.

phone to wired modem card.

Select the Start button > Point to Programs > Point to Communications > select Terminal,

(

Modem card icon

: ) After that, connect outlet of your

Select mode card.

Select the emulation type you want depending on

and double-tap the Make a new Session (

) icon.

For more detailed settings, select the Configure button.

Select the fastest modem speed available.

Tap OK and it will try to connect automatically to your ISP network.

Page 6-12 Chapter 6

V. Word Viewer

Word Viewer allows you to view Microsoft Word file without any change of extension name.

When you copy Word files of desktop to your device through Microsoft ActiveSync, the

extension name of each Word file will be changed to another name you don

’

t want. This

Word Viewer supports the same extension (extension name: doc, rtf) name with your

desktop, so you don

’

t need automatically to change extension name.

This is how you change the setting of Microsoft ActiveSync.

Select the Options button.

Select Conversion Settings.

Deselect this option box not to convert the file extension name when copied between desktop and your device. However,

For more information on this conversion settings, see chapter 4 “Install

Microsoft ActiveSync & Establish a partnership”.

select the Device to Desktop tab or the Desktop to Device tab to adjust the extension name to another you want.

 To start Word Viewer

1. Copy Word files to the My Documents folder through Microsoft ActiveSync. (Also you

can use CF & SD memory card.)

Open the Word Viewer program

3. Select Open of the File menu.

Microsoft Programs Page 6-13

New folder

Upper folder

Simple

Detail

4. Select a file you want and tap OK.

5. Select Zoom of the View menu to see more detailed file.

Page 6-14 Chapter 6

VI. Excel Viewer

Excel Viewer allows you to view Microsoft Excel file without any change of extension name.

When you copy Excel files of desktop to your device through Microsoft ActiveSync, the

extension name of each Excel file will be changed to another name you don

’

t want. This

Excel Viewer supports the same extension (extension name: .xl*) name with your desktop,

so you don

’

t need automatically to change extension name.

This is how you change the setting of Microsoft ActiveSync.

Select the Options button.

Select Conversion Settings.

Deselect this option box not to convert the file extension name when copied between desktop and your device. However, select the Device to Desktop tab or the Desktop to Device tab to adjust the extension name to another you want.

For more information on this conversion settings, see chapter 4 “Install

Microsoft ActiveSync & Establish a partnership”.

 To start Excel Viewer

1. Copy Excel files to the My Documents folder through Microsoft ActiveSync. (Also you

can use CF & SD memory card.)

Open the

Excel

Viewer program

Microsoft Programs Page 6-15

3. Select Open of the File menu.

New folder

Upper folder

Simple

Detail

4. Select a file you want and tap OK.

Select a Sheet you want to open.

5. Select Zoom of the View menu to see more detailed file.

Page 6-16 Chapter 6

6. Select Split of the View menu to divide your Excel file.

7. Select Remove Split of the View menu not to divide your Excel file.

Microsoft Programs Page 6-17

VII. PowerPoint Viewer

PowerPoint Viewer allows you to view Microsoft PowerPoint file without any change of

extension name. When you copy PowerPoint files of desktop to your device through

Microsoft ActiveSync, the extension name of each PowerPoint file will be changed to

another name you don

’

t want. This PowerPoint Viewer supports the same extension

(extension name: PPT & PPS) name with your desktop, so you don

to change extension name.

This is how you change the setting of Microsoft ActiveSync.

Select the Options button.

Select Conversion Settings.

’

t need automatically

For more information on this conversion settings, see chapter 4 “Install

Microsoft ActiveSync & Establish a partnership”.

 To start PowerPoint Viewer

1. Copy PowerPoint files to the My Documents folder through Microsoft ActiveSync.

(Also you can use CF & SD memory card.)

Open the

PowerPoint

Viewer program

Page 6-18 Chapter 6

3. Select Open of the File menu.

New Folder

Upper folder

Simple

Detail

4. Select a file you want in the list.

Move up/down the selected file

Select a file you want to open.

Normal vie

Slide sort vie

Slide Show view

5. Select the Slide sort view icon.

Slide sort vie

Microsoft Programs Page 6-19

6. Select the Slide Show ( ) icon and tap Water Mark to have a pop-up menu

displayed.

Tap here to

move to the

previous o

next page.

Tap here to move to a page you want.

Water Mark

Tap Pointer to have an arrow displayed.

Tap here to change pen color.

 To set up the Slide Show preference

Select Set Up Show of the Slide Show menu.

 To set up preferences

Select Preferences of the Slide Show menu.

Page 6-20 Chapter 6

Select landscape o portrait.

VIII. Image Viewer

The Image Viewer application enables you to view image files stored on your device. You

can view images in BMP, 2BP, GIF and PNG formats.

 To start Image Viewer

1. Copy images to the My documents folder on your device using Microsoft ActiveSync

or SD and CF card.

2. Open the Image Viewer program.

3. Select Lock In of the File menu.

4. Select the folder where images are stored and tap OK.

Up/down icon

View full screen

Set up Slide show Slide Show

File Information

 To set up Slide Show

Select the Set up Slide Show ( ) icon or select Set up show of the Slide Show menu.

Microsoft Programs Page 6-21

Up/down buttons

Rotate.

Zoom

 To start Slide Show

1. Select View Show of the Slide Show menu.

View Show.

Manual

: tap screen when you want to move to next page.

When you clear the option box of a file, the file will not be displayed during Slide Show.

The interval during automatic Advance

Automatic

Slide show preference.

Automatic (Repeat)

the Slide show preference and when it arrives at the last page, it goes back to

the first page.

: automatically move to next page after the preset interval in the

: automatically move to next page after the preset interval in

Water Mark

3. On the pop-up menu that is displayed through tapping Water Mark, you can select

Next or Previous page and close slide show.

Page 6-22 Chapter 6

 Rotate and Zoom

Select a specific file you want to rotate and select the View full screen

( )

button or select View Full Screen of the View menu.

Water Mark

Select the Water Mark to display the pop-up menu that has Rotate, Zoom.

 To save a file of the Slide Show Settings

To save the preference file of slide show (extension name: wss), Select Save Show

Settings As of the File menu.

Enter the name of the Slide show preference.

Extension name of the slide show preference

Select the folder you want to save the slide show preference file at.

Microsoft Programs Page 6-23

IX. PDF Viewer

The PDF Viewer enables you to open the PDF files. The extension name should be PDF.

You cannot open the PDF file that includes Korean fonts.

 To start the PDF Viewer

1. Copy PDF files to the My documents folder on your device using Microsoft

ActiveSync or SD and CF card.

Open the PDF

3. Select Open of the File menu.

Viewer program.

New folder

Upper folder

Simple

Detail

4. Select the PDF file you want and tap OK.

Page 6-24 Chapter 6

TThhee 3

Errors may occur when you use more than 1,500 items in Calendar, Tasks and

Contacts.

Majesty provides you with programs including Calendar, Tasks, Contacts and Inbox

for your convenience. You can synchronise data in Calendar, Tasks, Contacts and

Inbox with data of your desktop using Microsoft ActiveSync.

I. Contacts

rrd

ppaarrttyy pprrooggrraammss

APPTTEE

“Contacts”

You can use data in Contacts to search Web pages, send mail messages. Contacts is the application

in which you store name and address information about people or businesses.

is a program that manages personal information, phone numbers, address, and more.

The 3rd party programs Page 7-1

(1) Creating a New Contact

Select this to

classify contacts

by category.

1. Tap the

2. Enter data in the relevant spaces.

3. If necessary, you can enter data under the

New

( ) button or tap

New Contact

Select this to add this contact information to mail address of Inbox

Category

tab and select

Cancel

(7) Making a new all day event

Tap

New All Day Event

is a little bit different from the New Appointment dialog box : the

already checked.

For more information, see

on the

File

menu. The Calendar dialog box appears. This display

“

Creating a New Appointment

Allday Event

box is

(8) Editing an Appointment

Double-tap the appointment you wish to edit, or select the appointment you wish to edit

and tap

Edit Item

on the

Edit

menu. For more information, see “Creating a New

Appointment.

The 3rd party programs Page 7-9

(9) Deleting an appointment

The column list tha

can be added on

the Agenda screen

After selecting the appointment you wish to delete, tap

Delete Item

on the

(10) Finding Appointments and Tasks

Tap

Find

on the

Enter the data needed to search for in the given box next to

Type

if needed. Tap

Tool

menu, or tap the

Find

( ) button.

Find

, and select the type from

(11) Editing Customize Column

Select Customize Columns of the Tools menu on the Agenda screen.

The column list that can be displayed

Edit

menu.

(12) Set up Options

Select Options of the Tools menu.

Tap here to set up holidays.

Tap Holidays to set up holidays.

A start day of a week.

Tap here to listen to alarm sound.

Page 7-10 Chapter 7

play

(13) Display by Category

You can display and see appointments by the category you assigned to the appointments.

1. If you tap the

As the number of categories that can be displayed is limited, all categories may not

be dis

2. Select the desired category, and only those appointments having that category will be

displayed on the appointments list.

3. Select Category Filter of the All Category button to select more than 2 categories on the

Category Filter screen.

All Category

ed.

( ) button, the registered categories appear.

The 3rd party programs Page 7-11

III. Tasks

(1) Creating a New Task

Tap

New Task

on the

File

menu or tap the

New Task

( ) button

Enter desired data in the

Check to see if the date and frequency of the task are correct; if they are not, select the

desired date and time by tapping the arrow on the right side of each item.

Then, it will look a little different than when you first saw it, as shown below.

Subject

boxes. (A task must have a

Subject

Page 7-12 Chapter 7

If you need to set recurrences, tap

When you are finished, tap OK. Then, when you return to the Tasks dialog box, it will look

a little different than when you first saw it, as show below.

Tap the Category tab to select categories.

Recurrence

If you have more detailed information, tap the Memo tab.

You can enter up to 264 characters.

(2) Editing a task

Double-tap the task you wish to edit, or select the task you wish to edit and tap

on the

Edit

menu. For more information, see “Creating a New Task”

(3) Deleting a task

After selecting the task you wish to delete, tap

Delete

( ) button, and the selected item is deleted.

Delete Task

on the

Edit

menu or tap the

Edit Task

(4) Deleting completed tasks

To delete completed tasks, tap

completed tasks are erased.

The 3rd party programs Page 7-13

Delete Completed Task

on the

Edit

menu and all

(5) Finding tasks

You can use this feature to find a specific task.

Tap

Find

on the

Tools

menu, or tap the

Find

( ) button.

(6) Editing Customize Column

Select Customize Column of the Tools menu.

The column list that is

displayed on the Tasks screen

(7) Display by Category

You can display and see tasks by the category you assigned to the tasks.

1. If you tap the

As the number of categories that can be displayed is limited, all categories may not

be displayed.

2. Select the desired category, and only those tasks having that category will be displayed

on the tasks list.

3. Select Category Filter of the All Category button to select more than 2 categories on the

Category Filter screen.

All Category

( ) button, the registered categories appear.

Page 7-14 Chapter 7

IV. Memo

The Memo program allows you to save contents that you have handwritten using the stylus

and also allows you to add text message, alarm and voice recording. The number of

memos that can be stored will vary depending on the memory. Each memo can contain

up to 4,000 characters.

(1) Creating a New Memo

Tap

New

on the

New Memo

File

menu, or tap the

Add next page

Save

Open

Text Mode

Draw Mode

New Memo

Recorde

( ) button.

Set Alarm

Enter the contents you want using the stylus.

If you want to enter text message, select the Text Mode (

If you want to add a new page, tap the Add next page (

Tap

Save

on the

File

menu or tap the

Save

( ) button to save the Memo (memo file’s

extension name is .cmo).

(2) Opening an existing Memo

Tap

Open

New Folder

Upper folder

on the

File

menu or tap the

Simple

Detailed

Open

( ) button.

) button.

Select the folder that holds the file you wish to open and double-tap the file.

The 3rd party programs Page 7-15

(3) Saving a Memo as JPG file

A Memo file, saved as CMO file, can be opened on other programs by saving it as

JPG file.

1. Enter content you want.

2. Select

3. Select the folder where you want to save your file and tap OK.

Save Current Page as JPG

Save All Pages as JPG

on the

File

(4) Selecting Pen or Eraser and setting Preferences



Select

Pen

Eraser

on the

Tools

menu or select the



In order to set up Preferences for Pen or Eraser, select

Eraser Weight

on the

Tools

menu.

Pen

( ) or

Eraser

( ) button.

Pen weight, Pen Color

(5) Using Text Mode

1. Select Text Mode on the Edit menu or tap the Text Mode ( ) button.

2. Enter content you want from the DioPen screen appearing automatically.

Text will be entered only in black.

Text is entered separately by page, which means that pages are not connected

between continuous pages.

Text appears above drawing content, if both modes co-exist.

menu.

(6) Setting up Alarm

1. Select Alarm Setting on the Tools menu or tap the Alarm Setting ( ) button.

’

2. If you didn

3. If you tap

New Folder

Upper folder

Page 7-16 Chapter 7

t save this file before, you will see the

Yes

, you will see the

Simple

Detailed

Save As

dialog box.

Save

dialog.

4. Select the folder where you want to save your file and tap OK.

5. Select an alarm time you want and tap the

Once an alarm is set, the alarm sound rings even though the Memo program is

closed or your device is in the Sleep Mode.

(7)

Voice Recording

Select Recorder on the Tools menu or tap the Recorder

Process slider

Tap the

The maximum of 9 recordings in one memo file can be added and are supposed

to be as simple as possible.

Recording

Stop

Play

button to start recording.

Setting

Select recording

Delete

button.

( )

button.

(8)

Setting up Preference

Select

Options

The 3rd party programs Page 7-17

on the

Tools

menu.

Tap here to listen to sound file that is selected.

Select here to select another sound file.

Sampling Rate

Sensitivity Slider

V. Calculator

Calculator includes three operating modes: Standard, Scientific and Convertible. In

Standard mode you can perform simple mathematical calculations. In Scientific mode you

can access scientific functions and perform sophisticated math calculations.

Standard Calculator: Select

Standard

on the calculator menu.

Keep on to Enter data Result

In order to keep the calculator displayed on top of all other programs, tap Top. To

cancel this function, tap Hide.

C : Clears all data (upper black box) you entered for calculation.

CE : Clears the result of calculation (lower black box).

Scientific Calculator: Select

Scientific

on the calculator menu.

Enter data

Result

This program supports up to 15-digit numbers.

Page 7-18 Chapter 7

Convertible Calculator: Select

Convertible

on the calculator menu.

Enter data

Result

1. First, select the weight or measure you want to convert (Length, Weight, Volume, Size,

Temperature).

2. Select the unit to convert and the unit to convert into. When you select a unit, it is

displayed in the windows above the lists and next to the

3. Enter a number to convert and tap

From

and To panes.

The 3rd party programs Page 7-19

VI. Recorder

Recorder allows you to record simple sounds or to play back existing Wave files.

Record

Play

Stop

Pause

Open File

Recording Settings

(1) Recording

Tap the

the right side of your device when the recorder program is open.

Record

button on the bottom of the

Record

screen or press the

Record

button on

To stop recording, tap the

button on the right side of your device.

Stop

button on the bottom of the Recorder or press the

record

(2) Saving recorded file as another name

1. Tap

SAVE

after you have completed recording.

2. Select a folder where you want to save this file and enter the file name in the file name

input box.

3. Tap

. However, if you do not want to save, tap

X (Exit)

Page 7-20 Chapter 7

(3) Opening files for playback

1. Tap the

2. Select the file you wish to play back, then tap

OPEN

button.

(4) Recording Settings Screen

1. Select the OPTION button.

Sensitivity Slider

Select

Sampling rates

sensitivity.

3. Tap OK.

Recording quality is directly associated with available recording time. High sampling

rates(KHz unit) and bits require much more memory.

and

bits

you want, and you are allowed to adjust the desired recording

The 3rd party programs Page 7-21

pee

diixx

WWaarrrraannttyy

Important

terms may be different in your country. If so, your authorized dealer or sales and service

office can give you details.

I. One year limited warranty for hardware & 6 month for

Battery

Cyberbank warrants this hardware product against defects in material and workmanship

for a period of one year from receipt by the original end-user purchaser. If Cyberbank

receives notice of the above-defined defects during the warranty period, Cyberbank will

either, at its option, repair or replace products that prove to be defective. Should

Cyberbank be unable to repair or replace the product within a reasonable amount of time,

the customer's alternate exclusive remedy shall be a refund of the purchase price upon

This is your hardware product warranty statement. Read it carefully. Warranty

return of the product.

II. Limitation of warranty

The above warranty shall not apply to defects resulting from:

misuse; unauthorized modification; opening for any reason; operation or storage outside

the environmental specifications for the product; in-transit damage; improper

maintenance; or defect resulting from use of non-Cyberbank software, accessories,

media, supplies, consumables, or such items not designed for use with the product.

Cyberbank makes no other express warranty, whether written or oral, with respect to this

product.

Any implied warranty of merchantability or fitness for a particular purpose is limited to the

one-year duration of this written warranty.

Some states, provinces, or countries do not allow limitations on how long an implied

warranty lasts, so the above limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights that vary

from state to state, province to province, or country to country.

Warranty Page B-1

III. Software Product License Agreement and Software

Product Limited Warranty

This Cyberbank product contains preinstalled software programs. Please read the

Cyberbank Software Product License Agreement before proceeding.

Important

before operating the equipment. The rights to the software are licensed, not sold.

Cyberbank or its licensors continue to own all intellectual property rights to the software,

and you will be granted certain rights to use the software upon your acceptance of this

license. Rights in the software are offered only on the condition that you agree to all terms

and conditions of the License Agreement. Operating the equipment indicates your

acceptance of these terms and conditions. If you do not agree to the terms and

conditions of the License Agreement, return the complete package for a full refund now.

: Carefully read this License Agreement and the Limited Warranty statement

Software Product License Agreement

The Cyberbank Software Product License Agreement shall govern the use of all software

that is provided to you, the customer, as part of this Cyberbank product with the exception

of Microsoft Software. Microsoft Products are licensed to you under the Microsoft End

User License Agreement (EULA) contained in the Microsoft documentation. Any third-

party software supplier's warranty terms that may be found online, or in any

documentation or other materials contained in the product packaging, shall govern the

use of that third-party software.

Use

You may only use the software on a single computer. You may not reverse, assemble, or

decompile the software.

Copies and adaptations

You may make copies or adaptations of the software (a) for archival purposes, or (b)

when copying or adaptation is an essential step in the use of the software with a computer

so long as the copies and adaptations are used in no other manner.

You have no other rights to copy unless you acquire an appropriate license to reproduce

which is available from Cyberbank for some software.

You agree that Cyberbank provides no warranty, free installation, or free training for any

Page B-2 Appendix B

copies or adaptations made by you.

All copies and adaptations of the software must bear the copyright notice(s) contained in

or on the original.

Ownership

You agree that you do not have any title to or ownership of the software, other than

ownership of the physical media. You acknowledge and agree that the software is

copyrighted and protected under the copyright laws.

You acknowledge and agree that the software or part thereof may have been developed

by a third-party software supplier named in the copyright notice(s) included with the

software, who shall be authorized to hold you responsible for any copyright infringement

or violation of this or their own License Agreement.

Transfer of rights in software

You may transfer rights to the software to a third party only as part of

the transfer of all your rights and only if you obtain the prior agreement

of the third party to be bound by the terms of this License Agreement. Upon

such a transfer, you agree that your rights to the software are terminated

and that you will either destroy all your copies and adaptations or deliver

them to the third party. Transfer to a U.S. government department or agency

or to a prime or lower tier contractor in connection with a U.S. government

contract shall be made only upon prior written agreement to terms required

by Cyberbank.

Termination

Cyberbank may terminate this software license for failure to comply with

any of these terms, provided Cyberbank has requested you to cure the

failure and you have failed to do so within thirty (30) days of such notice.

Updates and upgrades

You agree that the software does not include updates and upgrades that may

be available from Cyberbank under a separate support agreement.

Warranty Page B-3

CyberBank CB-2460 Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual