Zero
Latency
Wireless Video Link
PRO 3 00 Plus
User Manual
Model:7059+3059
Version :1.1
2018.12.1 2
Contents
About the User Manual
- Please read thi s ma nu al c arefully befo re you us e th is p roduct and re ta in i t
properly fo r fu tu re re fe rence .
- If there is any q ue stion or difficulty about the o pe ration of pro du ct ,
please feel fre e to contact us or the de al er.
About the User Manual
Brief introduction
Features
Packing list
Specification
Interface Information
Quick Start Guide
LED Digits Display description
Application Recommendations
Trouble shooting
02
02
02
03
04
05
09
14
16
19
- The compa ny reserves the authority to mod if y th e in struction manuals.
Brief Introduction
As the widely use of live b roadcasti ng , m any problems ab ou t wi ri ng a pp ear,
such as the high cost a nd s ho rt l ife time of the cable. Fu rt he r, some other fa ctors
affect the user exp erience of live broadcast, s uc h as t he insufficient cable
prote ct io n an d th e tread by crowded people, which wi ll l ea d to the poor cable
transmiss io n ca pa bility or even to acci de nt . PR O300 Plus provides you m ore
convenient and safer s ol ut io n for live broadcasting. Wit h th e ad vantage of long
distance transmission, plug- an d- pl ay usage, it can sa ti sf y your va ri ou s indoor and
out door shooting req ui rements. Wi th a dd it io n of i ts free cable wir in g ne ed ed ,
it will bring much safer and mo re profes si onal expe ri en ce to you !
Features
The pro du ct w it h it s transmiss io n di stance of up to 5 00 m eters can meet the
demands of film shooting, tel evision bro ad ca sting, live even ts ,
large con fe rence , etc.
The product delivers uncompressed real-time 1080P/60Hz full HD video (4:2: 2, 10bit).
Support HDMI, HD-SDI, 3G-SDI.
Full hardwa re design, plug & play;
5.1 G- 5.9G, Support manua l se tt in g for channel swi tching and broa dc ast mode.
Support SDI time code t ransmission (time c od e format: ATC_V ITC , ATC_ LTC).
Support SDI camera recordi ng t rigger function (Start/Stop Flag) transmission.
Comply with EDID 1.1 , Support HDMI 1. 3.
Support AES128 bit encryption .
Packing List
Specification
Please check the packag e in si de to assure it contains the parts as below,
if any parts miss ed , pl ea se contact the dist ri bu tor or us.
Transmitter
Tran smitt er * 1
t * 1
n
-Mou
V
*
Opti
al
n
o
Anten na * 2
SDI Cable * 1
Pow er Cabl e * 1
2- Pin Lem o to D- Tap
Hot-sho e
Stand * 1
Receiver
Pow er Cabl e * 1
Recei ver * 1
SDI Cable * 1
Anten na * 5
DC Ad ap ter * 1
12V 2A Le mo 2 p in
*Option al
* Some of the acces so ries are option al w it h extra cost, if you n ee d to purc ha se,
please contact the di st ri bu tor or us.
* If some changes on the appearan ce, logo and ac cessories, su bj ec t to the actual
recei ved pro du ct .
2- Pin Lem o to BTap
Hot-sho e
Stand * 1
It em
Frequ ency
Bandwid th
Video F ormat s
Audio F ormat s
Tim e Code
Transmission distance
5.1~5.9GHz
40MHz
1080P 23. 98/24 /25/3 0/50/60
1080i 50/ 59.94 /6 0
576 P 576i 480p 48 0i
PCM
ATC_VITC ATC_LTC
Up to 500 m
Specification
1080psf 2 3.98/ 24/25
720P 50 /59.9 4/60
Transmitter
Anten na
Tran smiss ion Power
Inter face
Mechani cal Int erfac e
LED Digit s Displ ay
Working Voltage
Power Consumption
Size(mm)
Tempera ture
Exter na l anten na * 2
17dBm
HDMI input, SDI input, Mini-USB, Lemo(0B/2pin) DC in,
Antenna RPSMA, Power switch
V-m ount, 1/4" fixi ng screw hol e
Workin g ch annel n um ber
7V~36V
<8W
126*78*23mm
-10~50 C(Working）；-40~80 C( Storage）
Receiver
Anten na
Recei ver S en sitiv ity
Inter face
Mechani cal Int erfac e
LED Digit s Displ ay Display the wo rking c ha nnel
Working Voltage
Power Consumption
Size(mm)
Tempera ture
* As the product' s co nt inuous improve me nt , th e pe rformance,
design and specifications a re subject to minus c ha ng e wi th ou t prior notice.
Exter na l anten na *5
-70dBm
HDMI outp ut, SDI o ut put, Mi ni -USB, L emo(2 pi n) DC in,
Anten na R PSMA, P owe r swi tch
V-m ount, 1/4" fixi ng screw hol e
7V~36V
<7 W
150*98*23mm
-10~50 C(Working）；-40~80 C( Storage）
04
Interface Information
Transmitter Interface
Mode l：7059
5.8G Antenna
Interface
V- MOUNT
5.8G Antenna
Interface
LED Dig its D isp lay
OK Button
CH Button
Mini US B
HDMI in
SDI in
DC- IN
Transmitter Interface Description
Item
LED Digits Display
OK Button
CH Button
Mini USB
HDMI IN
SDI IN
DC-IN
5.8G Antenna
Connector
V-MOUNT
Sony F-Type
Battery Plate
Power Switch
Display the working channel 1~9, A(10) , b( 11 )
Confirm the function sele ct io n
Switch the working channel
Be used for software upgra di ng
HDMI IN
SDI IN
Power i nput interface (LEMO): s up po rt 7 V to 36V
(Notice: please con fi rm the polarity before you
plugging in the power supply.)
Connect with RP-SMA anten na
Support installat io n of V-mount devices
Be used for install in g externa l So ny F-type battery
Power O N/O FF
Specifi catio n
V- MOUNT
Pow er Sw itc h
0605
Receiver Interface
Mode l：3059
5.8 G Anten na
Inte rface
Receiver Interface Description
Item
Specifi catio n
5.8 G Anten na
Inte rface
V- MOUNT
LED Dig its D isp lay
OK Button
CH Button
Mini US B
SDI Out
HDMI Ou t
DC- IN
LED Digits Display
OK Button (Dualfunction button)
CH Button
Mini USB
HDMI OUT
Display the working channel 1~9, A(10) , b( 11 )
Confirm the function sele ct io n/Switc hi ng between
normal mode and enhance d an ti -i nterferen ce mode
Switch the working channel
Be used for software upgra di ng
HDMI OUT
SDI OUT SDI OUT
Power i nput interface (LEMO): s up po rt 7 V to 36V
DC-IN
(Notice: please con fi rm the polarity before you
plugging in the power supply.)
5.8G Antenna
Connector
V-MOUNT
Sony F-Type
Battery Plate
Power Switch
Connect with RP-SMA anten na
Support installat io n of V-mount devices
Be used for install in g externa l So ny F-type battery
Power O N/O FF
V- MOUNT
Pow er Sw itc h
Product Installation
Transmitter Installation Steps:
TX
3. Turn on the power sw itch to sta rt p ower su pp ly in g.
1. Fix the antennas and a dj us t th eir angles as shown i n th e fi gu re below.
(For details, pleas e refer to the transmission dist an ce description.)
Notice: ple ase rota te the gol den
mental part of antenn a to
faste n the ante nna.
Ante nna Pattern 1:
90° an gle in the same plane
Ante nna Pattern 2:
Right side 45 ° angle
rota tion towa rds backside
Power Switch: ON tur n on
OFF turn off
4.Press “ CH ” bu tton to select the co rresponding working channel of receiver a nd
then press “O K” b ut ton for con fi rm at ion. The LED digits dis pl ay will display o ne
of the characte rs f rom 1 ~ 9, A an d b wh en t he v id eo s ignal of devi ce i s no rmal.
(TX and RX use same defau lt working channel)
2. Connect Tx wi th t he c am era via cor responding
power c ab le and HD video cables as shown i n the figure below.
H DM I
S DI D C
HDMI IN
SDI IN
DC IN
7V- 36V
Li-ba tte ry
Camera
12V powe r ada pte r
5. The tran sm it ter supports manual ly s wi tching the SDI audio in pu t mo de by long
pressin g “O K” b ut ton. (Notice: T hi s function is only va li d for SDI audio input and
won’t affec t th e HD MI a udio input.)The def au lt value of SDI a ud io i np ut m od e is 0
and the decimal point will be set to be n on -bright under this mode; long pre ss “OK”
key b ut ton for more th an 3 s econds, and then the LE D di gi ts d is pl ay will display
SDI audio input mode as 1 while the dec im al p oi nt w il l be bright.
Audio input mode 0: adopt int er nal SDI clock signal of TX
Audio input mode 1: adopt SDI c lo ck s ig na l of S DI input signal
Receiver Installation Steps:
1. Fix the antennas and a dj us t th eir angles as shown i n th e fi gu re below.
Noti ce:
plea se rotate the
gold en menta l
part of an tenna to
fasten the antenn a.
RX
3. Turn on the power sw itch to sta rt p ower su pp ly in g.
Power Switch: ON tur n on
OFF turn off
2. Conn ec t RX with t he m onito r via cor res po nding p owe r cable a nd H D
video cab les as sh own in th e fi gure be low.
4. Press “C H” b ut ton to select the cor responding working channel of re ceive r an d
then press “O K” b ut ton for con fi rm at ion.The LED digits display wi ll d is pl ay one of
the character s from 1 ~ 9, A and b w he n th e vi de o si gnal of devic e is n or mal;
the monitor will disp lay the image fro m ca me ra simultaneously.
S DI
H DM I
SDI OUT
HDMI OU T
DC IN
7V- 36V
SDI mon ito r
D C
Li-ba tte ry
12V powe r ada pte r
11 12
5. RX supports switch in g between norma l mo de a nd e nh an ced anti interfere nce mode acco rding to transmission di st an ce and inte rf erence level
a) Switch fro m normal mode to enhanc ed a nti-interfe rence mode: lon g press
“OK” for longer than 3 seco nd s to enter enha nc ed anti-interfe rence mode,
and decimal point of digital tube ( in di ca tor) starts to fl as h sl owly.
b) Sw it ch from enhance d an ti-interference mode to no rm al m ode: long press
“OK” for longer than 3 seco nd s to enter norm al m od e, and decimal point
of the digital tube(indicat or ) goes out
c) Normal mode is defau lt s etting, supporting memory fun ct io n,
so RX will enter last m od e af ter reboo t.
(Normal mode is rec ommended for long-dista nce tra ns mi ss ion scenario;
enhanced anti-int er ference m od e is reco mm en de d for short-distanc e
transmiss io n an d strong in te rferenc e scenario)
LED Digits Display description
LED Digits Display Status
Power Indicator
TX : SDI Aud io Input
Mode I ndicator
RX : Nor mal/Enhanced
Anti -interfere nce
Mode I ndicator
Transmitter
Video Indi cato r
LED Di gits Display
13
LED Di gits Display: Chann el 1 ~ 9, A(10), b(11 )
Video In di cato r: Red: HDMI inpu t; Yellow: SDI input
Power Indicator: Illum inate in worki ng mode
SDI Audi o Input Mode In di cato r:
Deci mal point light i s off: SDI Audio In pu t Mode 0
Deci mal point light i s on: SDI Audio Inp ut M ode 1
14
Receiver
Application Recommendations
LE D Di gits Display: Chann el 1 ~ 9, A, b
Video In di cato r: HDMI and SDI o ut puts are enabled togeth er,
there are two status of the indi cato r
1：Red and Yellow l ight together: RX receives the signal f rom TX n or mally,
and HD MI and SDI output s are workin g toge ther
2：No lig ht: No output sig nals via HDMI a nd S DI ports
Power Indicator: Flash s lowly wh en the network is not conne cted .
Ligh t on normally whe n the network is connected.
Norm al/Enhanced Ant i-interference Mode Indicator :
Deci mal point light i s off : normal mode
Deci mal point light f lashes slowly: enha nced a nti-interference mode
Support Full PSF resolution
Support Full PSF resolution
25PSF in = 25 P SF out
29.97PSF=29.97PSF out
23.98P in =23.9 8P out
24P in=24P out
Application Recommendations
In order to reach the be st p er fo rmance of wireless transmission ,
we re co mmend to meet the requirements as fol lows:
1. The vertical he ight of TX and RX sho uld be same and more than 1 .5 m
2. TX an d Rx are worki ng u nder the conditio n of line of sight di st ance
3. Pla ne of TX antennas towa rd pla ne of RX antennas face-to-face
1.Recommended Installation Method under Ideal Position
Make recei ver t o stand vert ic ally; a djust a ntenn as to a fan -shap ed a rra ng ement ;
Make trans mi tte r to stan d ver ti cally ; ad just an tenna s to 90° an gle in th e sa me plan e.
30PSF in = 30 PSF out
50i in = 50i ou t
59.9 4i in = 59.94i out
60i in = 60i ou t
25P in=25 P out
29.97P in=29. 97 P out
30P in=30 P out
TX：7059RX：3059
1615
2.Recommended Installation Method under
Non-ideal Position
When the front side of the transmitter is not able to face to the receiver,
Please make receiver to stand vertically; adjust antennas to a fan-shaped arrangement;
Make trans mi tte r to stan d ver ti cally ; ad just th e right s id e of the 2 tr ansmi tter
anten na s towards backs ide by 45 °.
Antenna Pattern 2:
Right side 45° angle
rota tion towards ba cksi de
TX：7059RX：3059
3. Recommended Installation Method
under Non-ideal Position
When the front side of the transmitter is not able
to face to the receiver, please try to adjust the
direction of transmitter antennas to make sure
that the formative fan-shaped arrangement
can face to the receiver for best signal transmission.
As shown in the right figu re:
Because TX and RX are working on ISM band, wireless transmission
performance is relevant with level of interference intensity. If transmission
performance declines, we recommend to switch the wireless channel of
TX and RX simultaneously for improvement of transmission performance
1817
Trouble shooting
Displ ay“ Lin k Connecti ng”
Image disp lay ed, No audio
Video source mu te
Volu me too low
Audio form at no t sup porte d
Somethin g wro ng wi th tr ansmitter/ recei ver
Audio
*For more q ue st io ns , please contac t th e di st ri bu tor or us.
Turn o n the a udi o of vi deo s ource
Turn u p the a udi o of vi deo s ource
Swi tch t he format of video sou rce o utp ut
Res tar t the trans mis sio n kit
19 20
FCC Statement
This equipment has be en t ested and fou nd to comply with the l im it s for a Class
B digital devic e, pursuant to pa rt 1 5 of t he FCC rules.These li mi ts a re designed to
provi de reasonable protection against h ar mf ul interfer ence in a res id en ti al
installation.This equ ip me nt g en erate s, u se s an d ca n radiate radio freq ue ncy
energy and, if not in st al led and usedin acco rdance with t he i ns tructions,
may cause harmful i nt erferen ce to rad io communications. However, th ere is no
guarantee t hat interference will not occu r in a p ar ticular installat io n. I f th is
equipmentdoes cau se h ar mf ul i nterferen ce to rad io or telev is io n recep ti on ,
which can be determin ed by turning the equipment off a nd o n, t he u se r is
encoura ge d to try to cor rect the inte rf erence by one or more of t he f ol lowing
measures:-R eo ri en t or relocate t he rece iv in g an tenna. Increa se t he s ep aration
between the equ ip me nt a nd receiver. Co nn ect the equipment into an o ut le t on
a circuit diffe rent from t ha t to which the re ceiver is c on nected. Con su lt t he d ea le r
or an exper ie nced radio/TV t ec hnician for help.To ass ure continued com pl iance,
any changes or modifi ca ti on s no t expre ssly approve d by the party re sp on si ble
for complianc e could voi d th e us er's authority to ope rate this equ ip me nt .
(Example use only shi el de d in terface c ab le s wh en connecting to computer or
peripheral devices).
FCC Radiation Exposure Statement
This equipment co mp li es with FCC R F radiation exposure limit s se t fo rth for an
uncontrol le d environ me nt .Thi s transmitter m ust not beco-loca ted or operat in g in
conjunction with an y ot her antenna or tran smitter. This equipment com pl ie s wi th
Part 15 of the FCC Rules. Operat io n is s ub ject to the following two co nditions:
(1) This devi ce may not ca us e ha rm fu l in terfere nce, and
(2) This devi ce must acc ept any inter fe rence received, includinginte rf erence
that may cause un de si red opera ti on .
Cautions!
The manufac tu rer is not re sp on si bl e for any rad io or TV interference caused by
unauthorized modi fi ca ti on s to this equipment. Su ch m od if ic ations could void the
user authority to ope rate the equi pm en t.
21
Loading...